[PATCH 14/20] net: sis: remove leading spaces before tabs

From: Hui Tang
Date: Wed May 19 2021 - 01:39:48 EST


There are a few leading spaces before tabs and remove it by running the
following commard:

$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'

Cc: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
Signed-off-by: Hui Tang <tanghui20@xxxxxxxxxx>
---
drivers/net/ethernet/sis/sis900.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c
index 620c26f..ca9c00b 100644
--- a/drivers/net/ethernet/sis/sis900.c
+++ b/drivers/net/ethernet/sis/sis900.c
@@ -678,12 +678,12 @@ static int sis900_mii_probe(struct net_device *net_dev)
/* Reset phy if default phy is internal sis900 */
if ((sis_priv->mii->phy_id0 == 0x001D) &&
((sis_priv->mii->phy_id1&0xFFF0) == 0x8000))
- status = sis900_reset_phy(net_dev, sis_priv->cur_phy);
+ status = sis900_reset_phy(net_dev, sis_priv->cur_phy);

/* workaround for ICS1893 PHY */
if ((sis_priv->mii->phy_id0 == 0x0015) &&
((sis_priv->mii->phy_id1&0xFFF0) == 0xF440))
- mdio_write(net_dev, sis_priv->cur_phy, 0x0018, 0xD200);
+ mdio_write(net_dev, sis_priv->cur_phy, 0x0018, 0xD200);

if(status & MII_STAT_LINK){
while (poll_bit) {
@@ -727,7 +727,7 @@ static int sis900_mii_probe(struct net_device *net_dev)
static u16 sis900_default_phy(struct net_device * net_dev)
{
struct sis900_private *sis_priv = netdev_priv(net_dev);
- struct mii_phy *phy = NULL, *phy_home = NULL,
+ struct mii_phy *phy = NULL, *phy_home = NULL,
*default_phy = NULL, *phy_lan = NULL;
u16 status;

@@ -1339,18 +1339,18 @@ static void sis900_timer(struct timer_list *t)
} else {
/* Link ON -> OFF */
if (!(status & MII_STAT_LINK)){
- netif_carrier_off(net_dev);
+ netif_carrier_off(net_dev);
if(netif_msg_link(sis_priv))
- printk(KERN_INFO "%s: Media Link Off\n", net_dev->name);
+ printk(KERN_INFO "%s: Media Link Off\n", net_dev->name);

- /* Change mode issue */
- if ((mii_phy->phy_id0 == 0x001D) &&
- ((mii_phy->phy_id1 & 0xFFF0) == 0x8000))
- sis900_reset_phy(net_dev, sis_priv->cur_phy);
+ /* Change mode issue */
+ if ((mii_phy->phy_id0 == 0x001D) &&
+ ((mii_phy->phy_id1 & 0xFFF0) == 0x8000))
+ sis900_reset_phy(net_dev, sis_priv->cur_phy);

sis630_set_eq(net_dev, sis_priv->chipset_rev);

- goto LookForLink;
+ goto LookForLink;
}
}

@@ -2331,7 +2331,7 @@ static int sis900_set_config(struct net_device *dev, struct ifmap *map)
case IF_PORT_10BASE2: /* 10Base2 */
case IF_PORT_AUI: /* AUI */
case IF_PORT_100BASEFX: /* 100BaseFx */
- /* These Modes are not supported (are they?)*/
+ /* These Modes are not supported (are they?)*/
return -EOPNOTSUPP;

default:
--
2.8.1