[PATCH v2] Bluetooth: disable filter dup when scan for adv monitor

[Howard Chung]

From: Yun-Hao Chung <howardchung@xxxxxxxxxxxx>

Disable duplicates filter when scanning for advertisement monitor for
the following reasons. The scanning includes active scan and passive
scan.

For HW pattern filtering (ex. MSFT), Realtek and Qualcomm controllers
ignore RSSI_Sampling_Period when the duplicates filter is enabled.

For SW pattern filtering, when we're not doing interleaved scanning, it
is necessary to disable duplicates filter, otherwise hosts can only
receive one advertisement and it's impossible to know if a peer is still
in range.

Reviewed-by: Archie Pusaka <apusaka@xxxxxxxxxxxx>
Reviewed-by: Manish Mandlik <mmandlik@xxxxxxxxxxxx>

Signed-off-by: Yun-Hao Chung <howardchung@xxxxxxxxxxxx>

---

Changes in v2:
- include the vendor name in the comment and commit messages

 net/bluetooth/hci_request.c | 46 +++++++++++++++++++++++++++++++++----
 1 file changed, 41 insertions(+), 5 deletions(-)

diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c
index fa9125b782f85..3465862429fb5 100644
--- a/net/bluetooth/hci_request.c
+++ b/net/bluetooth/hci_request.c
@@ -932,7 +932,7 @@ static bool scan_use_rpa(struct hci_dev *hdev)
 
 static void hci_req_start_scan(struct hci_request *req, u8 type, u16 interval,
 			       u16 window, u8 own_addr_type, u8 filter_policy,
-			       bool addr_resolv)
+			       bool filter_dup, bool addr_resolv)
 {
 	struct hci_dev *hdev = req->hdev;
 
@@ -997,7 +997,7 @@ static void hci_req_start_scan(struct hci_request *req, u8 type, u16 interval,
 
 		memset(&ext_enable_cp, 0, sizeof(ext_enable_cp));
 		ext_enable_cp.enable = LE_SCAN_ENABLE;
-		ext_enable_cp.filter_dup = LE_SCAN_FILTER_DUP_ENABLE;
+		ext_enable_cp.filter_dup = filter_dup;
 
 		hci_req_add(req, HCI_OP_LE_SET_EXT_SCAN_ENABLE,
 			    sizeof(ext_enable_cp), &ext_enable_cp);
@@ -1016,7 +1016,7 @@ static void hci_req_start_scan(struct hci_request *req, u8 type, u16 interval,
 
 		memset(&enable_cp, 0, sizeof(enable_cp));
 		enable_cp.enable = LE_SCAN_ENABLE;
-		enable_cp.filter_dup = LE_SCAN_FILTER_DUP_ENABLE;
+		enable_cp.filter_dup = filter_dup;
 		hci_req_add(req, HCI_OP_LE_SET_SCAN_ENABLE, sizeof(enable_cp),
 			    &enable_cp);
 	}
@@ -1053,6 +1053,8 @@ void hci_req_add_le_passive_scan(struct hci_request *req)
 	u8 own_addr_type;
 	u8 filter_policy;
 	u16 window, interval;
+	/* Default is to enable duplicates filter */
+	u8 filter_dup = LE_SCAN_FILTER_DUP_ENABLE;
 	/* Background scanning should run with address resolution */
 	bool addr_resolv = true;
 
@@ -1106,6 +1108,20 @@ void hci_req_add_le_passive_scan(struct hci_request *req)
 	} else if (hci_is_adv_monitoring(hdev)) {
 		window = hdev->le_scan_window_adv_monitor;
 		interval = hdev->le_scan_int_adv_monitor;
+
+		/* Disable duplicates filter when scanning for advertisement
+		 * monitor for the following reasons.
+		 *
+		 * For HW pattern filtering (ex. MSFT), Realtek and Qualcomm
+		 * controllers ignore RSSI_Sampling_Period when the duplicates
+		 * filter is enabled.
+		 *
+		 * For SW pattern filtering, when we're not doing interleaved
+		 * scanning, it is necessary to disable duplicates filter,
+		 * otherwise hosts can only receive one advertisement and it's
+		 * impossible to know if a peer is still in range.
+		 */
+		filter_dup = LE_SCAN_FILTER_DUP_DISABLE;
 	} else {
 		window = hdev->le_scan_window;
 		interval = hdev->le_scan_interval;
@@ -1113,7 +1129,8 @@ void hci_req_add_le_passive_scan(struct hci_request *req)
 
 	bt_dev_dbg(hdev, "LE passive scan with whitelist = %d", filter_policy);
 	hci_req_start_scan(req, LE_SCAN_PASSIVE, interval, window,
-			   own_addr_type, filter_policy, addr_resolv);
+			   own_addr_type, filter_policy, filter_dup,
+			   addr_resolv);
 }
 
 static bool adv_instance_is_scannable(struct hci_dev *hdev, u8 instance)
@@ -3135,6 +3152,8 @@ static int active_scan(struct hci_request *req, unsigned long opt)
 	u8 own_addr_type;
 	/* White list is not used for discovery */
 	u8 filter_policy = 0x00;
+	/* Default is to enable duplicates filter */
+	u8 filter_dup = LE_SCAN_FILTER_DUP_ENABLE;
 	/* Discovery doesn't require controller address resolution */
 	bool addr_resolv = false;
 	int err;
@@ -3159,9 +3178,26 @@ static int active_scan(struct hci_request *req, unsigned long opt)
 	if (err < 0)
 		own_addr_type = ADDR_LE_DEV_PUBLIC;
 
+	if (hci_is_adv_monitoring(hdev)) {
+		/* Duplicate filter should be disabled when some advertisement
+		 * monitor is activated, otherwise AdvMon can only receive one
+		 * advertisement for one peer(*) during active scanning, and
+		 * might report loss to these peers.
+		 *
+		 * Note that different controllers have different meanings of
+		 * |duplicate|. Some of them consider packets with the same
+		 * address as duplicate, and others consider packets with the
+		 * same address and the same RSSI as duplicate. Although in the
+		 * latter case we don't need to disable duplicate filter, but
+		 * it is common to have active scanning for a short period of
+		 * time, the power impact should be neglectable.
+		 */
+		filter_dup = LE_SCAN_FILTER_DUP_DISABLE;
+	}
+
 	hci_req_start_scan(req, LE_SCAN_ACTIVE, interval,
 			   hdev->le_scan_window_discovery, own_addr_type,
-			   filter_policy, addr_resolv);
+			   filter_policy, filter_dup, addr_resolv);
 	return 0;
 }
 
-- 
2.31.1.751.gd2f1c929bd-goog