Re: [PATCH v3 07/17] arm64/dts: qcom: sdm845: Use RPMH_CE_CLK macro directly
From: Thara Gopinath
Date: Thu May 20 2021 - 21:47:16 EST
On 5/19/21 10:36 AM, Bhupesh Sharma wrote:
In commit 3e482859f1ef ("dts: qcom: sdm845: Add dt entries
to support crypto engine."), we decided to use the value indicated
by constant RPMH_CE_CLK rather than using it directly.
Now that the same RPMH clock value might be used for other
SoCs (in addition to sdm845), let's use the constant
RPMH_CE_CLK to make sure that this dtsi is compatible with the
other qcom ones.
Cc: Thara Gopinath <thara.gopinath@xxxxxxxxxx>
Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Andy Gross <agross@xxxxxxxxxx>
Cc: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
Cc: David S. Miller <davem@xxxxxxxxxxxxx>
Cc: Stephen Boyd <sboyd@xxxxxxxxxx>
Cc: Michael Turquette <mturquette@xxxxxxxxxxxx>
Cc: Vinod Koul <vkoul@xxxxxxxxxx>
Cc: dmaengine@xxxxxxxxxxxxxxx
Cc: linux-clk@xxxxxxxxxxxxxxx
Cc: linux-crypto@xxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: bhupesh.linux@xxxxxxxxx
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
Reviewed-by: Thara Gopinath <thara.gopinath@xxxxxxxxxx>
Warm Regards
Thara
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 0a86fe71a66d..2ec4be930fd6 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2316,7 +2316,7 @@ cryptobam: dma@1dc4000 {
compatible = "qcom,bam-v1.7.0";
reg = <0 0x01dc4000 0 0x24000>;
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rpmhcc 15>;
+ clocks = <&rpmhcc RPMH_CE_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
@@ -2332,7 +2332,7 @@ crypto: crypto@1dfa000 {
reg = <0 0x01dfa000 0 0x6000>;
clocks = <&gcc GCC_CE1_AHB_CLK>,
<&gcc GCC_CE1_AHB_CLK>,
- <&rpmhcc 15>;
+ <&rpmhcc RPMH_CE_CLK>;
clock-names = "iface", "bus", "core";
dmas = <&cryptobam 6>, <&cryptobam 7>;
dma-names = "rx", "tx";