Re: [PATCH 15/16] arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's
From: Geert Uytterhoeven
Date: Fri May 21 2021 - 11:35:46 EST
Hi Prabhakar,
On Fri, May 14, 2021 at 9:24 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:
> Add initial DTSI for RZ/G2{L,LC} SoC's.
>
> File structure:
> r9a07g044.dtsi => RZ/G2L family SoC common parts
> r9a07g044l.dtsi => Specific to RZ/G2L (R9A07G044L) SoC
> r9a07g044l1.dtsi => Specific to RZ/G2L (R9A07G044L single cortex A55) SoC
> r9a07g044l2.dtsi => Specific to RZ/G2L (R9A07G044L dual cortex A55) SoC
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
Thanks for your patch!
> index 000000000000..c625d302f889
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
> @@ -0,0 +1,70 @@
> +// SPDX-License-Identifier: GPL-2.0
Do we want to use
SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
for new DTS files?
This actually also applies to <dt-bindings/...> files.
> +/*
> + * Device Tree Source for the RZ/G2L and RZ/G2LC common SoC parts
> + *
> + * Copyright (C) 2021 Renesas Electronics Corp.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/r9a07g044l-cpg.h>
> +
> +/ {
> + compatible = "renesas,r9a07g044";
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + extal_clk: extal {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0", "arm,psci-0.2";
> + method = "smc";
> + };
> +
> + soc: soc {
> + compatible = "simple-bus";
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + scif0: serial@1004b800 {
> + compatible = "renesas,scif-r9a07g044";
> + reg = <0 0x1004b800 0 0x400>;
> + interrupts =
> + <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
"make dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/serial/renesas,scif.yaml":
arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dt.yaml:
serial@1004b800: interrupts: 'oneOf' conditional failed, one must be
fixed:
[[0, 380, 4], [0, 382, 4], [0, 383, 4], [0, 381, 4], [0, 384, 4]]
is too long
Additional items are not allowed ([0, 382, 4], [0, 383, 4], [0,
381, 4], [0, 384, 4] were unexpected)
Additional items are not allowed ([0, 384, 4] was unexpected)
[[0, 380, 4], [0, 382, 4], [0, 383, 4], [0, 381, 4], [0, 384, 4]]
is too short
One interrupt is missing. According to the documentation, "tei" and
"dri" share an interrupt, so they should map to the same interrupt number.
Please add interrupt-names.
> + clocks = <&cpg CPG_MOD R9A07G044_CLK_SCIF0>;
> + clock-names = "fck";
> + power-domains = <&cpg>;
> + resets = <&cpg R9A07G044_CLK_SCIF0>;
> + status = "disabled";
> + };
> +
> + devid: chipid@11020a04 {
> + compatible = "renesas,devid";
> + reg = <0 0x11020a04 0 4>;
> + };
> +
> + gic: interrupt-controller@11900000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <3>;
> + #address-cells = <0>;
> + interrupt-controller;
> + reg = <0x0 0x11900000 0 0x40000>,
> + <0x0 0x11940000 0 0x60000>;
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&cpg CPG_MOD R9A07G044_CLK_GIC600>;
> + clock-names = "gic6000";
This looks like a weird name ;-)
In addition, it should be the consumer clock name, not the provider
clock name.
> + power-domains = <&cpg>;
> + resets = <&cpg R9A07G044_CLK_GIC600>;
"make dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml":
arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dt.yaml:
interrupt-controller@11900000: 'clock-names', 'clocks',
'power-domains', 'resets' do not match any of the regexes:
'^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$',
'^gic-its@', '^interrupt-controller@[0-9a-f]+$', 'pinctrl-[0-9]+'
These properties should be added to the GIC-v3 bindings, cfr. the normal
GIC bindings.
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l.dtsi
> new file mode 100644
> index 000000000000..8d396b9100c1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r9a07g044l.dtsi
> @@ -0,0 +1,21 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for the RZ/G2L common SoC parts
> + *
> + * Copyright (C) 2021 Renesas Electronics Corp.
> + */
> +
> +/dts-v1/;
> +#include "r9a07g044.dtsi"
> +
> +&soc {
> + cpg: clock-controller@11010000 {
> + compatible = "renesas,r9a07g044l-cpg";
> + reg = <0 0x11010000 0 0x10000>;
> + clocks = <&extal_clk>;
> + clock-names = "extal";
> + #clock-cells = <2>;
> + #reset-cells = <1>;
> + #power-domain-cells = <0>;
> + };
As I think this is shared by RZ/G2L and RZ/G2LC, it belongs to
r9a07g044.dtsi.
> +};
> diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi
> new file mode 100644
> index 000000000000..44d4504e44c3
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi
> @@ -0,0 +1,43 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for the RZ/G2L R9A07G044L1 common parts
> + *
> + * Copyright (C) 2021 Renesas Electronics Corp.
> + */
> +
> +/dts-v1/;
> +#include "r9a07g044l.dtsi"
> +
> +/ {
> + compatible = "renesas,r9a07g044l1";
> + #address-cells = <2>;
> + #size-cells = <2>;
#{address,size}-cells already defined in r9a07g044.dtsi.
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + a55_0: cpu@0 {
> + compatible = "arm,cortex-a55";
> + reg = <0>;
> + device_type = "cpu";
> + next-level-cache = <&L3_CA55>;
> + enable-method = "psci";
> + };
> +
> + L3_CA55: cache-controller-0 {
> + compatible = "cache";
> + cache-unified;
> + cache-size = <0x40000>;
> + };
I think the first CPU core should be in the base r9a07g044.dtsi file.
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts-extended =
> + <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
> + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
> + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
> + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
Also in the base file, with interrupts-extended overridden where
needed?
> + };
> +};
> diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi
> new file mode 100644
> index 000000000000..33bb35e1c369
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi
> @@ -0,0 +1,62 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for the RZ/G2L R9A07G044L2 common parts
> + *
> + * Copyright (C) 2021 Renesas Electronics Corp.
> + */
> +
> +/dts-v1/;
> +#include "r9a07g044l.dtsi"
> +
> +/ {
> + compatible = "renesas,r9a07g044l2";
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&a55_0>;
> + };
> + core1 {
> + cpu = <&a55_1>;
> + };
> + };
> + };
> +
> + a55_0: cpu@0 {
> + compatible = "arm,cortex-a55";
> + reg = <0>;
> + device_type = "cpu";
> + next-level-cache = <&L3_CA55>;
> + enable-method = "psci";
> + };
> +
> + a55_1: cpu@1 {
> + compatible = "arm,cortex-a55";
> + reg = <0x100>;
> + device_type = "cpu";
> + next-level-cache = <&L3_CA55>;
> + enable-method = "psci";
> + };
> +
> + L3_CA55: cache-controller-0 {
> + compatible = "cache";
> + cache-unified;
> + cache-size = <0x40000>;
> + };
I think (at least) the first CPU core should be in the base
r9a07g044.dtsi file.
Probably the second CPU core should be in the base file, too, and
removed by /delete-node/ in r9a07g044l1.dtsi?
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts-extended =
> + <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
> + };
Also in the base file, with interrupts-extended overridden where
needed?
> +};
> --
> 2.17.1
>
--
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds