[PATCH 3/5] ARM: dts: omap3: align gpio hog names with dt-schema

[Grygorii Strashko]

The GPIO Hog dt-schema node naming convention expect GPIO hogs node names
to end with a 'hog' suffix.

Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
---
 arch/arm/boot/dts/omap3-evm-processor-common.dtsi | 2 +-
 arch/arm/boot/dts/omap3-gta04a5.dts               | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
index b4109f48ec18..e6ba30a21166 100644
--- a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
+++ b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
@@ -195,7 +195,7 @@
  * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V.
  */
 &gpio2 {
-	en_usb2_port {
+	en-usb2-port-hog {
 		gpio-hog;
 		gpios = <29 GPIO_ACTIVE_HIGH>;	/* gpio_61 */
 		output-low;
diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts
index fd84bbf3b9cc..9ce8d81250aa 100644
--- a/arch/arm/boot/dts/omap3-gta04a5.dts
+++ b/arch/arm/boot/dts/omap3-gta04a5.dts
@@ -37,7 +37,7 @@
 };
 
 &gpio5 {
-	irda_en {
+	irda-en-hog {
 		gpio-hog;
 		gpios = <(175-160) GPIO_ACTIVE_HIGH>;
 		output-high;	/* activate gpio_175 to disable IrDA receiver */
-- 
2.17.1