RE: [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()

[Ryan Chen]

> -----Original Message-----
> From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
> Sent: Monday, May 24, 2021 6:20 PM
> To: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>; Corey Minyard
> <minyard@xxxxxxx>; Rob Herring <robh+dt@xxxxxxxxxx>; Joel Stanley
> <joel@xxxxxxxxx>; Andrew Jeffery <andrew@xxxxxxxx>; Brendan Higgins
> <brendanhiggins@xxxxxxxxxx>; Benjamin Herrenschmidt
> <benh@xxxxxxxxxxxxxxxxxxx>; Wolfram Sang <wsa@xxxxxxxxxx>; Philipp Zabel
> <p.zabel@xxxxxxxxxxxxxx>; openipmi-developer@xxxxxxxxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> linux-aspeed@xxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> linux-i2c@xxxxxxxxxxxxxxx
> Cc: Open Source Submission <patches@xxxxxxxxxxxxxxxxxxx>; Thang Q .
> Nguyen <thang@xxxxxxxxxxxxxxxxxxxxxx>; Phong Vo
> <phong@xxxxxxxxxxxxxxxxxxxxxx>; openbmc@xxxxxxxxxxxxxxxx
> Subject: Re: [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
> 
> On 24/05/2021 17:06, Ryan Chen wrote:
> >> -----Original Message-----
> >> From: openbmc
> >> <openbmc-bounces+ryan_chen=aspeedtech.com@xxxxxxxxxxxxxxxx> On
> Behalf
> >> Of Quan Nguyen
> >> Sent: Wednesday, May 19, 2021 3:50 PM
> >> To: Corey Minyard <minyard@xxxxxxx>; Rob Herring
> >> <robh+dt@xxxxxxxxxx>; Joel Stanley <joel@xxxxxxxxx>; Andrew Jeffery
> >> <andrew@xxxxxxxx>; Brendan Higgins <brendanhiggins@xxxxxxxxxx>;
> >> Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>; Wolfram Sang
> >> <wsa@xxxxxxxxxx>; Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>;
> >> openipmi-developer@xxxxxxxxxxxxxxxxxxxxx;
> >> devicetree@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> >> linux-aspeed@xxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> >> linux-i2c@xxxxxxxxxxxxxxx
> >> Cc: Open Source Submission <patches@xxxxxxxxxxxxxxxxxxx>; Thang Q .
> >> Nguyen <thang@xxxxxxxxxxxxxxxxxxxxxx>; Phong Vo
> >> <phong@xxxxxxxxxxxxxxxxxxxxxx>; openbmc@xxxxxxxxxxxxxxxx
> >> Subject: [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
> >>
> >> Slave i2c device on AST2500 received a lot of slave irq while it is
> >> busy processing the response. To handle this case, adds and exports
> >> aspeed_set_slave_busy() for controller to temporary stop slave irq
> >> while slave is handling the response, and re-enable them again when the
> response is ready.
> >>
> >> Signed-off-by: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
> >> ---
> >> v3:
> >>    + First introduce in v3 [Quan]
> >>
> >>   drivers/i2c/busses/i2c-aspeed.c | 20 ++++++++++++++++++++
> >>   1 file changed, 20 insertions(+)
> >>
> >> diff --git a/drivers/i2c/busses/i2c-aspeed.c
> >> b/drivers/i2c/busses/i2c-aspeed.c index b2e9c8f0ddf7..9926d04831a2
> >> 100644
> >> --- a/drivers/i2c/busses/i2c-aspeed.c
> >> +++ b/drivers/i2c/busses/i2c-aspeed.c
> >> @@ -944,6 +944,26 @@ static int aspeed_i2c_init(struct aspeed_i2c_bus
> >> *bus,
> >>   	return 0;
> >>   }
> >>
> >> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> >> +void aspeed_set_slave_busy(struct i2c_adapter *adap, bool busy) {
> >> +	struct aspeed_i2c_bus *bus = i2c_get_adapdata(adap);
> >> +	unsigned long current_mask, flags;
> >> +
> >> +	spin_lock_irqsave(&bus->lock, flags);
> >> +
> >> +	current_mask = readl(bus->base + ASPEED_I2C_INTR_CTRL_REG);
> > Hello
> > 	Where the bus->base to be remap?
> >
> 
> Hi Ryan,
> 
> In "[PATCH v3 6/7] ipmi: ssif_bmc: Add Aspeed SSIF BMC driver", the
> ->priv is retrieved by calling i2c_get_adapdata(client->adapter). And in
> aspeed_set_ssif_bmc_status(), call the exported aspeed_set_slave_busy()
> using ->priv pointer as code below.
> 
Yes, I see the probe function " ssif_bmc->priv = i2c_get_adapdata(client->adapter);" to get priv.
But my question I don’t see the bus->base address be assigned. 

> +extern void aspeed_set_slave_busy(struct i2c_adapter *adap, bool busy);
> +static void aspeed_set_ssif_bmc_status(struct ssif_bmc_ctx *ssif_bmc,
> unsigned int status)
> +{
> +	if (status & SSIF_BMC_BUSY)
> +		aspeed_set_slave_busy((struct i2c_adapter *)ssif_bmc->priv, true);
> +	else if (status & SSIF_BMC_READY)
> +		aspeed_set_slave_busy((struct i2c_adapter *)ssif_bmc->priv, false); }
> +
> +static int ssif_bmc_probe(struct i2c_client *client, const struct
> i2c_device_id *id)
> +{
> +	struct ssif_bmc_ctx *ssif_bmc;
> +
> +	ssif_bmc = ssif_bmc_alloc(client, 0);
> +	if (IS_ERR(ssif_bmc))
> +		return PTR_ERR(ssif_bmc);
> +
> +	ssif_bmc->priv = i2c_get_adapdata(client->adapter);
> +	ssif_bmc->set_ssif_bmc_status = aspeed_set_ssif_bmc_status;
> +
> +	return 0;
> +}
> 
> - Quan
> 
>