Re: [PATCH v2] clk: meson: meson8b: Use CLK_SET_RATE_NO_REPARENT for vclk{,2}_in_sel

[Martin Blumenstingl]

Hi Jerome,

On Mon, May 24, 2021 at 4:30 PM Jerome Brunet <jbrunet@xxxxxxxxxxxx> wrote:
>
>
> On Mon 24 May 2021 at 15:45, Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> wrote:
>
> > Use CLK_SET_RATE_NO_REPARENT for the vclk{,2}_in_sel clocks. The only
> > parent which is actually used is vid_pll_final_div. This should be set
> > using assigned-clock-parents in the .dts rather than removing some
> > "unwanted" clock parents from the clock driver.
> >
> > Suggested-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
> > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
> > ---
> > After a hint from Jerome (thanks) this is the improved version of
> > "clk: meson: meson8b: Don't use MPLL1 as parent of vclk_in_sel" from [0]
> >
> >
> > [0] https://patchwork.kernel.org/project/linux-clk/patch/20210524104533.555953-1-martin.blumenstingl@xxxxxxxxxxxxxx/
> >
> >
> >  drivers/clk/meson/meson8b.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
> > index a844d35b553a..0f8bd707217a 100644
> > --- a/drivers/clk/meson/meson8b.c
> > +++ b/drivers/clk/meson/meson8b.c
> > @@ -1175,7 +1175,7 @@ static struct clk_regmap meson8b_vclk_in_sel = {
> >               .ops = &clk_regmap_mux_ro_ops,
>
> I just noticed that these muxes are read-only ATM.
> It does not make this change (or the previous one) wrong but it does not
> make much sense as the mux won't ever change.
indeed, as-is the patch is a no-op

> I suppose you make this mutable with another patch later on ?
correct, I have a patch in my queue which will make all relevant
clocks in the vclk and vclk2 trees mutable
my idea behind this is to not mix any _ro_ops to _ops conversion with
other types of changes (so the actual reason for a change is still
documented in the git history)


Best regards,
Martin