[PATCH 4/5] arm64: dts: imx8mn: Add power-domain reference in USB controller

[Adam Ford]

The USB OTG controller cannot be used until the power-domain is enabled
unless it was started in the bootloader.

Adding the power-domain reference to the OTG node allows the OTG
controller to operate.

Signed-off-by: Adam Ford <aford173@xxxxxxxxx>

diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 0eb64b59c8e3..8b1fb83cb893 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -1009,6 +1009,7 @@ usbotg1: usb@32e40000 {
 				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
 				fsl,usbphy = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc1 0>;
+				power-domains = <&pgc_otg1>;
 				status = "disabled";
 			};
 
-- 
2.25.1