Re: [PATCH 3/3] virtio_blk: implement blk_mq_ops->poll()
From: Jason Wang
Date: Mon May 24 2021 - 23:21:57 EST
在 2021/5/20 下午10:13, Stefan Hajnoczi 写道:
Request completion latency can be reduced by using polling instead of
irqs. Even Posted Interrupts or similar hardware support doesn't beat
polling. The reason is that disabling virtqueue notifications saves
critical-path CPU cycles on the host by skipping irq injection and in
the guest by skipping the irq handler. So let's add blk_mq_ops->poll()
support to virtio_blk.
The approach taken by this patch differs from the NVMe driver's
approach. NVMe dedicates hardware queues to polling and submits
REQ_HIPRI requests only on those queues. This patch does not require
exclusive polling queues for virtio_blk. Instead, it switches between
irqs and polling when one or more REQ_HIPRI requests are in flight on a
virtqueue.
This is possible because toggling virtqueue notifications is cheap even
while the virtqueue is running. NVMe cqs can't do this because irqs are
only enabled/disabled at queue creation time.
This toggling approach requires no configuration. There is no need to
dedicate queues ahead of time or to teach users and orchestration tools
how to set up polling queues.
Possible drawbacks of this approach:
- Hardware virtio_blk implementations may find virtqueue_disable_cb()
expensive since it requires DMA.
Note that it's probably not related to the behavior of the driver but
the design of the event suppression mechanism.
Device can choose to ignore the suppression flag and keep sending
interrupts.
If such devices become popular then
the virtio_blk driver could use a similar approach to NVMe when
VIRTIO_F_ACCESS_PLATFORM is detected in the future.
- If a blk_poll() thread is descheduled it not only hurts polling
performance but also delays completion of non-REQ_HIPRI requests on
that virtqueue since vq notifications are disabled.
Can we poll only when only high pri requests are pending?
If the backend is a remote one, I think the polling may cause more cpu
cycles.
Performance:
- Benchmark: fio ioengine=pvsync2 numjobs=4 direct=1
- Guest: 4 vCPUs with one virtio-blk device (4 virtqueues)
- Disk: Intel Corporation NVMe Datacenter SSD [Optane] [8086:2701]
- CPU: Intel(R) Xeon(R) Silver 4214 CPU @ 2.20GHz
rw bs hipri=0 hipri=1
------------------------------
randread 4k 149,426 170,763 +14%
randread 16k 118,939 134,269 +12%
randread 64k 34,886 34,906 0%
randread 128k 17,655 17,667 0%
randwrite 4k 138,578 163,600 +18%
randwrite 16k 102,089 120,950 +18%
randwrite 64k 32,364 32,561 0%
randwrite 128k 16,154 16,237 0%
read 4k 146,032 170,620 +16%
read 16k 117,097 130,437 +11%
read 64k 34,834 35,037 0%
read 128k 17,680 17,658 0%
write 4k 134,562 151,422 +12%
write 16k 101,796 107,606 +5%
write 64k 32,364 32,594 0%
write 128k 16,259 16,265 0%
Larger block sizes do not benefit from polling as much but the
improvement is worthwhile for smaller block sizes.
Signed-off-by: Stefan Hajnoczi <stefanha@xxxxxxxxxx>
---
drivers/block/virtio_blk.c | 92 +++++++++++++++++++++++++++++++++++---
1 file changed, 87 insertions(+), 5 deletions(-)
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index fc0fb1dcd399..f0243dcd745a 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -29,6 +29,16 @@ static struct workqueue_struct *virtblk_wq;
struct virtio_blk_vq {
struct virtqueue *vq;
spinlock_t lock;
+
+ /* Number of non-REQ_HIPRI requests in flight. Protected by lock. */
+ unsigned int num_lopri;
+
+ /* Number of REQ_HIPRI requests in flight. Protected by lock. */
+ unsigned int num_hipri;
+
+ /* Are vq notifications enabled? Protected by lock. */
+ bool cb_enabled;
We had event_flag_shadow, is it sufficient to introduce a new helper
virtqueue_cb_is_enabled()?
+
char name[VQ_NAME_LEN];
} ____cacheline_aligned_in_smp;
@@ -171,33 +181,67 @@ static inline void virtblk_request_done(struct request *req)
blk_mq_end_request(req, virtblk_result(vbr));
}
-static void virtblk_done(struct virtqueue *vq)
+/* Returns true if one or more requests completed */
+static bool virtblk_complete_requests(struct virtqueue *vq)
{
struct virtio_blk *vblk = vq->vdev->priv;
struct virtio_blk_vq *vbq = &vblk->vqs[vq->index];
bool req_done = false;
+ bool last_hipri_done = false;
struct virtblk_req *vbr;
unsigned long flags;
unsigned int len;
spin_lock_irqsave(&vbq->lock, flags);
+
do {
- virtqueue_disable_cb(vq);
+ if (vbq->cb_enabled)
+ virtqueue_disable_cb(vq);
while ((vbr = virtqueue_get_buf(vq, &len)) != NULL) {
struct request *req = blk_mq_rq_from_pdu(vbr);
+ if (req->cmd_flags & REQ_HIPRI) {
+ if (--vbq->num_hipri == 0)
+ last_hipri_done = true;
+ } else
+ vbq->num_lopri--;
+
if (likely(!blk_should_fake_timeout(req->q)))
blk_mq_complete_request(req);
req_done = true;
}
if (unlikely(virtqueue_is_broken(vq)))
break;
- } while (!virtqueue_enable_cb(vq));
+
+ /* Enable vq notifications if non-polled requests remain */
+ if (last_hipri_done && vbq->num_lopri > 0) {
+ last_hipri_done = false;
+ vbq->cb_enabled = true;
+ }
+ } while (vbq->cb_enabled && !virtqueue_enable_cb(vq));
/* In case queue is stopped waiting for more buffers. */
if (req_done)
blk_mq_start_stopped_hw_queues(vblk->disk->queue, true);
spin_unlock_irqrestore(&vbq->lock, flags);
+
+ return req_done;
+}
+
+static int virtblk_poll(struct blk_mq_hw_ctx *hctx)
+{
+ struct virtio_blk *vblk = hctx->queue->queuedata;
+ struct virtqueue *vq = vblk->vqs[hctx->queue_num].vq;
+
+ if (!virtqueue_more_used(vq))
I'm not familiar with block polling but what happens if a buffer is made
available after virtqueue_more_used() returns false here?
Thanks
+ return 0;
+
+ return virtblk_complete_requests(vq);
+}
+
+static void virtblk_done(struct virtqueue *vq)
+{
+ virtblk_complete_requests(vq);
}
static void virtio_commit_rqs(struct blk_mq_hw_ctx *hctx)
@@ -275,6 +319,16 @@ static blk_status_t virtio_queue_rq(struct blk_mq_hw_ctx *hctx,
}
spin_lock_irqsave(&vbq->lock, flags);
+
+ /* Re-enable vq notifications if first req is non-polling */
+ if (!(req->cmd_flags & REQ_HIPRI) &&
+ vbq->num_lopri == 0 && vbq->num_hipri == 0 &&
+ !vbq->cb_enabled) {
+ /* Can't return false since there are no in-flight reqs */
+ virtqueue_enable_cb(vbq->vq);
+ vbq->cb_enabled = true;
+ }
+
err = virtblk_add_req(vbq->vq, vbr, vbr->sg, num);
if (err) {
virtqueue_kick(vbq->vq);
@@ -294,6 +348,21 @@ static blk_status_t virtio_queue_rq(struct blk_mq_hw_ctx *hctx,
}
}
+ /*
+ * Disable vq notifications when polled reqs are submitted.
+ *
+ * The virtqueue lock is held so req is still valid here even if the
+ * device polls the virtqueue and completes the request before we call
+ * virtqueue_notify().
+ */
+ if (req->cmd_flags & REQ_HIPRI) {
+ if (vbq->num_hipri++ == 0 && vbq->cb_enabled) {
+ virtqueue_disable_cb(vbq->vq);
+ vbq->cb_enabled = false;
+ }
+ } else
+ vbq->num_lopri++;
+
if (bd->last && virtqueue_kick_prepare(vbq->vq))
notify = true;
spin_unlock_irqrestore(&vbq->lock, flags);
@@ -533,6 +602,9 @@ static int init_vq(struct virtio_blk *vblk)
for (i = 0; i < num_vqs; i++) {
spin_lock_init(&vblk->vqs[i].lock);
vblk->vqs[i].vq = vqs[i];
+ vblk->vqs[i].num_lopri = 0;
+ vblk->vqs[i].num_hipri = 0;
+ vblk->vqs[i].cb_enabled = true;
}
vblk->num_vqs = num_vqs;
@@ -681,8 +753,16 @@ static int virtblk_map_queues(struct blk_mq_tag_set *set)
{
struct virtio_blk *vblk = set->driver_data;
- return blk_mq_virtio_map_queues(&set->map[HCTX_TYPE_DEFAULT],
- vblk->vdev, 0);
+ set->map[HCTX_TYPE_DEFAULT].nr_queues = vblk->num_vqs;
+ blk_mq_virtio_map_queues(&set->map[HCTX_TYPE_DEFAULT], vblk->vdev, 0);
+
+ set->map[HCTX_TYPE_READ].nr_queues = 0;
+
+ /* HCTX_TYPE_DEFAULT queues are shared with HCTX_TYPE_POLL */
+ set->map[HCTX_TYPE_POLL].nr_queues = vblk->num_vqs;
+ blk_mq_virtio_map_queues(&set->map[HCTX_TYPE_POLL], vblk->vdev, 0);
+
+ return 0;
}
static const struct blk_mq_ops virtio_mq_ops = {
@@ -691,6 +771,7 @@ static const struct blk_mq_ops virtio_mq_ops = {
.complete = virtblk_request_done,
.init_request = virtblk_init_request,
.map_queues = virtblk_map_queues,
+ .poll = virtblk_poll,
};
static unsigned int virtblk_queue_depth;
@@ -768,6 +849,7 @@ static int virtblk_probe(struct virtio_device *vdev)
memset(&vblk->tag_set, 0, sizeof(vblk->tag_set));
vblk->tag_set.ops = &virtio_mq_ops;
+ vblk->tag_set.nr_maps = 3; /* default, read, and poll */
vblk->tag_set.queue_depth = queue_depth;
vblk->tag_set.numa_node = NUMA_NO_NODE;
vblk->tag_set.flags = BLK_MQ_F_SHOULD_MERGE;