[PATCH 1/2] thermal: int340x: processor_thermal: Split enumeration and processing part
From: Srinivas Pandruvada
Date: Tue May 25 2021 - 16:48:23 EST
Remove enumeration part from the processor_thermal_device to two
different modules. One for ACPI and one for PCI:
ACPI enumeration: int3401_thermal
PCI part: processor_thermal_device_pci_legacy
The current processor_thermal_device now just implements interface
functions to be used by the ACPI and PCI enumeration module. This is
done by:
1. Make functions proc_thermal_add() and proc_thermal_remove() non static
and export them for usage in other processor_thermal_device_pci_legacy.c
and in int3401_thermal.c.
2. Move the sysfs file creation for TCC offset and power limit attribute
group to the proc_thermal_add() from the individual enumeration callbacks
for PCI and ACPI.
3. Create new interface functions proc_thermal_mmio_add() and
proc_thermal_mmio_remove() which will be called from the
processor_thermal_device_pci_legacy module.
4. Export proc_thermal_resume(), so that it can be used by power
management callbacks.
5. Remove special check for double enumeration as it never happens.
While here, fix some cleanup on error conditions in proc_thermal_add().
No functional changes are expected with this change.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
---
.../thermal/intel/int340x_thermal/Makefile | 2 +
.../intel/int340x_thermal/int3401_thermal.c | 82 +++++
.../processor_thermal_device.c | 289 ++----------------
.../processor_thermal_device.h | 8 +-
.../processor_thermal_device_pci_legacy.c | 164 ++++++++++
5 files changed, 286 insertions(+), 259 deletions(-)
create mode 100644 drivers/thermal/intel/int340x_thermal/int3401_thermal.c
create mode 100644 drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci_legacy.c
diff --git a/drivers/thermal/intel/int340x_thermal/Makefile b/drivers/thermal/intel/int340x_thermal/Makefile
index 38a2731e503c..aaf02d5deed5 100644
--- a/drivers/thermal/intel/int340x_thermal/Makefile
+++ b/drivers/thermal/intel/int340x_thermal/Makefile
@@ -4,6 +4,8 @@ obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal_zone.o
obj-$(CONFIG_INT340X_THERMAL) += int3402_thermal.o
obj-$(CONFIG_INT340X_THERMAL) += int3403_thermal.o
obj-$(CONFIG_INT340X_THERMAL) += processor_thermal_device.o
+obj-$(CONFIG_INT340X_THERMAL) += int3401_thermal.o
+obj-$(CONFIG_INT340X_THERMAL) += processor_thermal_device_pci_legacy.o
obj-$(CONFIG_PROC_THERMAL_MMIO_RAPL) += processor_thermal_rapl.o
obj-$(CONFIG_INT340X_THERMAL) += processor_thermal_rfim.o
obj-$(CONFIG_INT340X_THERMAL) += processor_thermal_mbox.o
diff --git a/drivers/thermal/intel/int340x_thermal/int3401_thermal.c b/drivers/thermal/intel/int340x_thermal/int3401_thermal.c
new file mode 100644
index 000000000000..acebc8ba94e2
--- /dev/null
+++ b/drivers/thermal/intel/int340x_thermal/int3401_thermal.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * INT3401 processor thermal device
+ * Copyright (c) 2020, Intel Corporation.
+ */
+#include <linux/acpi.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#include "int340x_thermal_zone.h"
+#include "processor_thermal_device.h"
+
+static const struct acpi_device_id int3401_device_ids[] = {
+ {"INT3401", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, int3401_device_ids);
+
+static int int3401_add(struct platform_device *pdev)
+{
+ struct proc_thermal_device *proc_priv;
+ int ret;
+
+ proc_priv = devm_kzalloc(&pdev->dev, sizeof(*proc_priv), GFP_KERNEL);
+ if (!proc_priv)
+ return -ENOMEM;
+
+ ret = proc_thermal_add(&pdev->dev, proc_priv);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, proc_priv);
+
+ return ret;
+}
+
+static int int3401_remove(struct platform_device *pdev)
+{
+ proc_thermal_remove(platform_get_drvdata(pdev));
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int int3401_thermal_resume(struct device *dev)
+{
+ return proc_thermal_resume(dev);
+}
+#else
+#define int3401_thermal_resume NULL
+#endif
+
+static SIMPLE_DEV_PM_OPS(int3401_proc_thermal_pm, NULL, int3401_thermal_resume);
+
+static struct platform_driver int3401_driver = {
+ .probe = int3401_add,
+ .remove = int3401_remove,
+ .driver = {
+ .name = "int3401 thermal",
+ .acpi_match_table = int3401_device_ids,
+ .pm = &int3401_proc_thermal_pm,
+ },
+};
+
+static int __init proc_thermal_init(void)
+{
+ return platform_driver_register(&int3401_driver);
+}
+
+static void __exit proc_thermal_exit(void)
+{
+ platform_driver_unregister(&int3401_driver);
+}
+
+module_init(proc_thermal_init);
+module_exit(proc_thermal_exit);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Processor Thermal Reporting Device Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
index 9e6f2a895a23..de4fc640deb0 100644
--- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
@@ -3,34 +3,17 @@
* processor_thermal_device.c
* Copyright (c) 2014, Intel Corporation.
*/
+#include <linux/acpi.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/acpi.h>
#include <linux/thermal.h>
-#include <linux/cpuhotplug.h>
#include "int340x_thermal_zone.h"
#include "processor_thermal_device.h"
#include "../intel_soc_dts_iosf.h"
#define DRV_NAME "proc_thermal"
-enum proc_thermal_emum_mode_type {
- PROC_THERMAL_NONE,
- PROC_THERMAL_PCI,
- PROC_THERMAL_PLATFORM_DEV
-};
-
-/*
- * We can have only one type of enumeration, PCI or Platform,
- * not both. So we don't need instance specific data.
- */
-static enum proc_thermal_emum_mode_type proc_thermal_emum_mode =
- PROC_THERMAL_NONE;
-
#define POWER_LIMIT_SHOW(index, suffix) \
static ssize_t power_limit_##index##_##suffix##_show(struct device *dev, \
struct device_attribute *attr, \
@@ -38,11 +21,6 @@ static ssize_t power_limit_##index##_##suffix##_show(struct device *dev, \
{ \
struct proc_thermal_device *proc_dev = dev_get_drvdata(dev); \
\
- if (proc_thermal_emum_mode == PROC_THERMAL_NONE) { \
- dev_warn(dev, "Attempted to get power limit before device was initialized!\n"); \
- return 0; \
- } \
- \
return sprintf(buf, "%lu\n",\
(unsigned long)proc_dev->power_limits[index].suffix * 1000); \
}
@@ -291,11 +269,8 @@ static void proc_thermal_notify(acpi_handle handle, u32 event, void *data)
}
}
-
-static int proc_thermal_add(struct device *dev,
- struct proc_thermal_device **priv)
+int proc_thermal_add(struct device *dev, struct proc_thermal_device *proc_priv)
{
- struct proc_thermal_device *proc_priv;
struct acpi_device *adev;
acpi_status status;
unsigned long long tmp;
@@ -306,13 +281,8 @@ static int proc_thermal_add(struct device *dev,
if (!adev)
return -ENODEV;
- proc_priv = devm_kzalloc(dev, sizeof(*proc_priv), GFP_KERNEL);
- if (!proc_priv)
- return -ENOMEM;
-
proc_priv->dev = dev;
proc_priv->adev = adev;
- *priv = proc_priv;
ret = proc_thermal_read_ppcc(proc_priv);
if (ret)
@@ -338,15 +308,29 @@ static int proc_thermal_add(struct device *dev,
if (ret)
goto remove_zone;
+ ret = sysfs_create_file(&dev->kobj, &dev_attr_tcc_offset_degree_celsius.attr);
+ if (ret)
+ goto remove_notify;
+
+ ret = sysfs_create_group(&dev->kobj, &power_limit_attribute_group);
+ if (ret) {
+ sysfs_remove_file(&dev->kobj, &dev_attr_tcc_offset_degree_celsius.attr);
+ goto remove_notify;
+ }
+
return 0;
+remove_notify:
+ acpi_remove_notify_handler(adev->handle,
+ ACPI_DEVICE_NOTIFY, proc_thermal_notify);
remove_zone:
int340x_thermal_zone_remove(proc_priv->int340x_zone);
return ret;
}
+EXPORT_SYMBOL_GPL(proc_thermal_add);
-static void proc_thermal_remove(struct proc_thermal_device *proc_priv)
+void proc_thermal_remove(struct proc_thermal_device *proc_priv)
{
acpi_remove_notify_handler(proc_priv->adev->handle,
ACPI_DEVICE_NOTIFY, proc_thermal_notify);
@@ -355,60 +339,24 @@ static void proc_thermal_remove(struct proc_thermal_device *proc_priv)
sysfs_remove_group(&proc_priv->dev->kobj,
&power_limit_attribute_group);
}
+EXPORT_SYMBOL_GPL(proc_thermal_remove);
-static int int3401_add(struct platform_device *pdev)
+int proc_thermal_resume(struct device *dev)
{
- struct proc_thermal_device *proc_priv;
- int ret;
-
- if (proc_thermal_emum_mode == PROC_THERMAL_PCI) {
- dev_err(&pdev->dev, "error: enumerated as PCI dev\n");
- return -ENODEV;
- }
-
- ret = proc_thermal_add(&pdev->dev, &proc_priv);
- if (ret)
- return ret;
-
- platform_set_drvdata(pdev, proc_priv);
- proc_thermal_emum_mode = PROC_THERMAL_PLATFORM_DEV;
-
- dev_info(&pdev->dev, "Creating sysfs group for PROC_THERMAL_PLATFORM_DEV\n");
-
- ret = sysfs_create_file(&pdev->dev.kobj, &dev_attr_tcc_offset_degree_celsius.attr);
- if (ret)
- return ret;
-
- ret = sysfs_create_group(&pdev->dev.kobj, &power_limit_attribute_group);
- if (ret)
- sysfs_remove_file(&pdev->dev.kobj, &dev_attr_tcc_offset_degree_celsius.attr);
+ struct proc_thermal_device *proc_dev;
- return ret;
-}
+ proc_dev = dev_get_drvdata(dev);
+ proc_thermal_read_ppcc(proc_dev);
-static int int3401_remove(struct platform_device *pdev)
-{
- proc_thermal_remove(platform_get_drvdata(pdev));
+ tcc_offset_update(tcc_offset_save);
return 0;
}
-
-static irqreturn_t proc_thermal_pci_msi_irq(int irq, void *devid)
-{
- struct proc_thermal_device *proc_priv;
- struct pci_dev *pdev = devid;
-
- proc_priv = pci_get_drvdata(pdev);
-
- intel_soc_dts_iosf_interrupt_handler(proc_priv->soc_dts);
-
- return IRQ_HANDLED;
-}
+EXPORT_SYMBOL_GPL(proc_thermal_resume);
#define MCHBAR 0
-static int proc_thermal_set_mmio_base(struct pci_dev *pdev,
- struct proc_thermal_device *proc_priv)
+static int proc_thermal_set_mmio_base(struct pci_dev *pdev, struct proc_thermal_device *proc_priv)
{
int ret;
@@ -423,9 +371,9 @@ static int proc_thermal_set_mmio_base(struct pci_dev *pdev,
return 0;
}
-static int proc_thermal_mmio_add(struct pci_dev *pdev,
- struct proc_thermal_device *proc_priv,
- kernel_ulong_t feature_mask)
+int proc_thermal_mmio_add(struct pci_dev *pdev,
+ struct proc_thermal_device *proc_priv,
+ kernel_ulong_t feature_mask)
{
int ret;
@@ -471,11 +419,10 @@ static int proc_thermal_mmio_add(struct pci_dev *pdev,
return ret;
}
+EXPORT_SYMBOL_GPL(proc_thermal_mmio_add);
-static void proc_thermal_mmio_remove(struct pci_dev *pdev)
+void proc_thermal_mmio_remove(struct pci_dev *pdev, struct proc_thermal_device *proc_priv)
{
- struct proc_thermal_device *proc_priv = pci_get_drvdata(pdev);
-
if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_RAPL)
proc_thermal_rapl_remove();
@@ -486,181 +433,7 @@ static void proc_thermal_mmio_remove(struct pci_dev *pdev)
if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_MBOX)
proc_thermal_mbox_remove(pdev);
}
-
-static int proc_thermal_pci_probe(struct pci_dev *pdev,
- const struct pci_device_id *id)
-{
- struct proc_thermal_device *proc_priv;
- int ret;
-
- if (proc_thermal_emum_mode == PROC_THERMAL_PLATFORM_DEV) {
- dev_err(&pdev->dev, "error: enumerated as platform dev\n");
- return -ENODEV;
- }
-
- ret = pcim_enable_device(pdev);
- if (ret < 0) {
- dev_err(&pdev->dev, "error: could not enable device\n");
- return ret;
- }
-
- ret = proc_thermal_add(&pdev->dev, &proc_priv);
- if (ret)
- return ret;
-
- pci_set_drvdata(pdev, proc_priv);
- proc_thermal_emum_mode = PROC_THERMAL_PCI;
-
- if (pdev->device == PCI_DEVICE_ID_INTEL_BSW_THERMAL) {
- /*
- * Enumerate additional DTS sensors available via IOSF.
- * But we are not treating as a failure condition, if
- * there are no aux DTSs enabled or fails. This driver
- * already exposes sensors, which can be accessed via
- * ACPI/MSR. So we don't want to fail for auxiliary DTSs.
- */
- proc_priv->soc_dts = intel_soc_dts_iosf_init(
- INTEL_SOC_DTS_INTERRUPT_MSI, 2, 0);
-
- if (!IS_ERR(proc_priv->soc_dts) && pdev->irq) {
- ret = pci_enable_msi(pdev);
- if (!ret) {
- ret = request_threaded_irq(pdev->irq, NULL,
- proc_thermal_pci_msi_irq,
- IRQF_ONESHOT, "proc_thermal",
- pdev);
- if (ret) {
- intel_soc_dts_iosf_exit(
- proc_priv->soc_dts);
- pci_disable_msi(pdev);
- proc_priv->soc_dts = NULL;
- }
- }
- } else
- dev_err(&pdev->dev, "No auxiliary DTSs enabled\n");
- }
-
- dev_info(&pdev->dev, "Creating sysfs group for PROC_THERMAL_PCI\n");
-
- ret = sysfs_create_file(&pdev->dev.kobj, &dev_attr_tcc_offset_degree_celsius.attr);
- if (ret)
- return ret;
-
- ret = sysfs_create_group(&pdev->dev.kobj, &power_limit_attribute_group);
- if (ret) {
- sysfs_remove_file(&pdev->dev.kobj, &dev_attr_tcc_offset_degree_celsius.attr);
- return ret;
- }
-
- ret = proc_thermal_mmio_add(pdev, proc_priv, id->driver_data);
- if (ret) {
- proc_thermal_remove(proc_priv);
- return ret;
- }
-
- return 0;
-}
-
-static void proc_thermal_pci_remove(struct pci_dev *pdev)
-{
- struct proc_thermal_device *proc_priv = pci_get_drvdata(pdev);
-
- if (proc_priv->soc_dts) {
- intel_soc_dts_iosf_exit(proc_priv->soc_dts);
- if (pdev->irq) {
- free_irq(pdev->irq, pdev);
- pci_disable_msi(pdev);
- }
- }
-
- proc_thermal_mmio_remove(pdev);
- proc_thermal_remove(proc_priv);
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int proc_thermal_resume(struct device *dev)
-{
- struct proc_thermal_device *proc_dev;
-
- proc_dev = dev_get_drvdata(dev);
- proc_thermal_read_ppcc(proc_dev);
-
- tcc_offset_update(tcc_offset_save);
-
- return 0;
-}
-#else
-#define proc_thermal_resume NULL
-#endif
-
-static SIMPLE_DEV_PM_OPS(proc_thermal_pm, NULL, proc_thermal_resume);
-
-static const struct pci_device_id proc_thermal_pci_ids[] = {
- { PCI_DEVICE_DATA(INTEL, ADL_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_MBOX) },
- { PCI_DEVICE_DATA(INTEL, BDW_THERMAL, 0) },
- { PCI_DEVICE_DATA(INTEL, BSW_THERMAL, 0) },
- { PCI_DEVICE_DATA(INTEL, BXT0_THERMAL, 0) },
- { PCI_DEVICE_DATA(INTEL, BXT1_THERMAL, 0) },
- { PCI_DEVICE_DATA(INTEL, BXTX_THERMAL, 0) },
- { PCI_DEVICE_DATA(INTEL, BXTP_THERMAL, 0) },
- { PCI_DEVICE_DATA(INTEL, CNL_THERMAL, 0) },
- { PCI_DEVICE_DATA(INTEL, CFL_THERMAL, 0) },
- { PCI_DEVICE_DATA(INTEL, GLK_THERMAL, 0) },
- { PCI_DEVICE_DATA(INTEL, HSB_THERMAL, 0) },
- { PCI_DEVICE_DATA(INTEL, ICL_THERMAL, PROC_THERMAL_FEATURE_RAPL) },
- { PCI_DEVICE_DATA(INTEL, JSL_THERMAL, 0) },
- { PCI_DEVICE_DATA(INTEL, SKL_THERMAL, PROC_THERMAL_FEATURE_RAPL) },
- { PCI_DEVICE_DATA(INTEL, TGL_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_MBOX) },
- { },
-};
-
-MODULE_DEVICE_TABLE(pci, proc_thermal_pci_ids);
-
-static struct pci_driver proc_thermal_pci_driver = {
- .name = DRV_NAME,
- .probe = proc_thermal_pci_probe,
- .remove = proc_thermal_pci_remove,
- .id_table = proc_thermal_pci_ids,
- .driver.pm = &proc_thermal_pm,
-};
-
-static const struct acpi_device_id int3401_device_ids[] = {
- {"INT3401", 0},
- {"", 0},
-};
-MODULE_DEVICE_TABLE(acpi, int3401_device_ids);
-
-static struct platform_driver int3401_driver = {
- .probe = int3401_add,
- .remove = int3401_remove,
- .driver = {
- .name = "int3401 thermal",
- .acpi_match_table = int3401_device_ids,
- .pm = &proc_thermal_pm,
- },
-};
-
-static int __init proc_thermal_init(void)
-{
- int ret;
-
- ret = platform_driver_register(&int3401_driver);
- if (ret)
- return ret;
-
- ret = pci_register_driver(&proc_thermal_pci_driver);
-
- return ret;
-}
-
-static void __exit proc_thermal_exit(void)
-{
- platform_driver_unregister(&int3401_driver);
- pci_unregister_driver(&proc_thermal_pci_driver);
-}
-
-module_init(proc_thermal_init);
-module_exit(proc_thermal_exit);
+EXPORT_SYMBOL_GPL(proc_thermal_mmio_remove);
MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>");
MODULE_DESCRIPTION("Processor Thermal Reporting Device Driver");
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
index 3161607424f5..5e51f1173d00 100644
--- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
@@ -80,5 +80,11 @@ int proc_thermal_mbox_add(struct pci_dev *pdev, struct proc_thermal_device *proc
void proc_thermal_mbox_remove(struct pci_dev *pdev);
int processor_thermal_send_mbox_cmd(struct pci_dev *pdev, u16 cmd_id, u32 cmd_data, u32 *cmd_resp);
-
+int proc_thermal_add(struct device *dev, struct proc_thermal_device *priv);
+void proc_thermal_remove(struct proc_thermal_device *proc_priv);
+int proc_thermal_resume(struct device *dev);
+int proc_thermal_mmio_add(struct pci_dev *pdev,
+ struct proc_thermal_device *proc_priv,
+ kernel_ulong_t feature_mask);
+void proc_thermal_mmio_remove(struct pci_dev *pdev, struct proc_thermal_device *proc_priv);
#endif
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci_legacy.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci_legacy.c
new file mode 100644
index 000000000000..21cf7511d376
--- /dev/null
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci_legacy.c
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * B0D4 processor thermal device
+ * Copyright (c) 2020, Intel Corporation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/thermal.h>
+
+#include "int340x_thermal_zone.h"
+#include "processor_thermal_device.h"
+#include "../intel_soc_dts_iosf.h"
+
+#define DRV_NAME "proc_thermal"
+
+static irqreturn_t proc_thermal_pci_msi_irq(int irq, void *devid)
+{
+ struct proc_thermal_device *proc_priv;
+ struct pci_dev *pdev = devid;
+
+ proc_priv = pci_get_drvdata(pdev);
+
+ intel_soc_dts_iosf_interrupt_handler(proc_priv->soc_dts);
+
+ return IRQ_HANDLED;
+}
+
+static int proc_thermal_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct proc_thermal_device *proc_priv;
+ int ret;
+
+ ret = pcim_enable_device(pdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "error: could not enable device\n");
+ return ret;
+ }
+
+ proc_priv = devm_kzalloc(&pdev->dev, sizeof(*proc_priv), GFP_KERNEL);
+ if (!proc_priv)
+ return -ENOMEM;
+
+ ret = proc_thermal_add(&pdev->dev, proc_priv);
+ if (ret)
+ return ret;
+
+ pci_set_drvdata(pdev, proc_priv);
+
+ if (pdev->device == PCI_DEVICE_ID_INTEL_BSW_THERMAL) {
+ /*
+ * Enumerate additional DTS sensors available via IOSF.
+ * But we are not treating as a failure condition, if
+ * there are no aux DTSs enabled or fails. This driver
+ * already exposes sensors, which can be accessed via
+ * ACPI/MSR. So we don't want to fail for auxiliary DTSs.
+ */
+ proc_priv->soc_dts = intel_soc_dts_iosf_init(
+ INTEL_SOC_DTS_INTERRUPT_MSI, 2, 0);
+
+ if (!IS_ERR(proc_priv->soc_dts) && pdev->irq) {
+ ret = pci_enable_msi(pdev);
+ if (!ret) {
+ ret = request_threaded_irq(pdev->irq, NULL,
+ proc_thermal_pci_msi_irq,
+ IRQF_ONESHOT, "proc_thermal",
+ pdev);
+ if (ret) {
+ intel_soc_dts_iosf_exit(
+ proc_priv->soc_dts);
+ pci_disable_msi(pdev);
+ proc_priv->soc_dts = NULL;
+ }
+ }
+ } else
+ dev_err(&pdev->dev, "No auxiliary DTSs enabled\n");
+ } else {
+
+ }
+
+ ret = proc_thermal_mmio_add(pdev, proc_priv, id->driver_data);
+ if (ret) {
+ proc_thermal_remove(proc_priv);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void proc_thermal_pci_remove(struct pci_dev *pdev)
+{
+ struct proc_thermal_device *proc_priv = pci_get_drvdata(pdev);
+
+ if (proc_priv->soc_dts) {
+ intel_soc_dts_iosf_exit(proc_priv->soc_dts);
+ if (pdev->irq) {
+ free_irq(pdev->irq, pdev);
+ pci_disable_msi(pdev);
+ }
+ }
+
+ proc_thermal_mmio_remove(pdev, proc_priv);
+ proc_thermal_remove(proc_priv);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int proc_thermal_pci_resume(struct device *dev)
+{
+ return proc_thermal_resume(dev);
+}
+#else
+#define proc_thermal_pci_resume NULL
+#endif
+
+static SIMPLE_DEV_PM_OPS(proc_thermal_pci_pm, NULL, proc_thermal_pci_resume);
+
+static const struct pci_device_id proc_thermal_pci_ids[] = {
+ { PCI_DEVICE_DATA(INTEL, ADL_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_MBOX) },
+ { PCI_DEVICE_DATA(INTEL, BDW_THERMAL, 0) },
+ { PCI_DEVICE_DATA(INTEL, BSW_THERMAL, 0) },
+ { PCI_DEVICE_DATA(INTEL, BXT0_THERMAL, 0) },
+ { PCI_DEVICE_DATA(INTEL, BXT1_THERMAL, 0) },
+ { PCI_DEVICE_DATA(INTEL, BXTX_THERMAL, 0) },
+ { PCI_DEVICE_DATA(INTEL, BXTP_THERMAL, 0) },
+ { PCI_DEVICE_DATA(INTEL, CNL_THERMAL, 0) },
+ { PCI_DEVICE_DATA(INTEL, CFL_THERMAL, 0) },
+ { PCI_DEVICE_DATA(INTEL, GLK_THERMAL, 0) },
+ { PCI_DEVICE_DATA(INTEL, HSB_THERMAL, 0) },
+ { PCI_DEVICE_DATA(INTEL, ICL_THERMAL, PROC_THERMAL_FEATURE_RAPL) },
+ { PCI_DEVICE_DATA(INTEL, JSL_THERMAL, 0) },
+ { PCI_DEVICE_DATA(INTEL, SKL_THERMAL, PROC_THERMAL_FEATURE_RAPL) },
+ { PCI_DEVICE_DATA(INTEL, TGL_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_MBOX) },
+ { },
+};
+
+MODULE_DEVICE_TABLE(pci, proc_thermal_pci_ids);
+
+static struct pci_driver proc_thermal_pci_driver = {
+ .name = DRV_NAME,
+ .probe = proc_thermal_pci_probe,
+ .remove = proc_thermal_pci_remove,
+ .id_table = proc_thermal_pci_ids,
+ .driver.pm = &proc_thermal_pci_pm,
+};
+
+static int __init proc_thermal_init(void)
+{
+ return pci_register_driver(&proc_thermal_pci_driver);
+}
+
+static void __exit proc_thermal_exit(void)
+{
+ pci_unregister_driver(&proc_thermal_pci_driver);
+}
+
+module_init(proc_thermal_init);
+module_exit(proc_thermal_exit);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Processor Thermal Reporting Device Driver");
+MODULE_LICENSE("GPL v2");
--
2.27.0