[PATCH net-next v3 8/9] net: dsa: dsa_slave_phy_connect(): extend phy's flags with port specific phy flags

[Oleksij Rempel]

This patch extends the flags of the phy that's being connected with the
port specific flags of the switch port.

This is needed to handle a port specific erratum of the KSZ8873 switch,
which is added in a later patch.

Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
 drivers/net/phy/phylink.c | 2 +-
 net/dsa/slave.c           | 4 ++++
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 96d8e88b4e46..167c2277814f 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1029,7 +1029,7 @@ static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy,
 	if (pl->phydev)
 		return -EBUSY;
 
-	return phy_attach_direct(pl->netdev, phy, 0, interface);
+	return phy_attach_direct(pl->netdev, phy, phy->dev_flags, interface);
 }
 
 /**
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 8c0f3c6ab365..7e208f16f006 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1758,6 +1758,10 @@ static int dsa_slave_phy_connect(struct net_device *slave_dev, int addr)
 		return -ENODEV;
 	}
 
+	if (ds->ops->get_phy_flags)
+		slave_dev->phydev->dev_flags |=
+			ds->ops->get_phy_flags(ds, dp->index);
+
 	return phylink_connect_phy(dp->pl, slave_dev->phydev);
 }
 
-- 
2.29.2