Re: [PATCH v5 00/16] Allwinner MIPI CSI-2 support for A31/V3s/A83T

From: Paul Kocialkowski
Date: Wed May 26 2021 - 09:28:30 EST

Next message: YueHaibing: "[PATCH -next] RDMA/core: use DEVICE_ATTR_RO macro"
Previous message: YueHaibing: "[PATCH -next] IB/ipoib: use DEVICE_ATTR_*() macro"
In reply to: Hans Verkuil: "Re: [PATCH v5 00/16] Allwinner MIPI CSI-2 support for A31/V3s/A83T"
Next in thread: Sakari Ailus: "Re: [PATCH v5 00/16] Allwinner MIPI CSI-2 support for A31/V3s/A83T"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

On Wed 26 May 21, 14:00, Hans Verkuil wrote:
> Hi Paul,
>
> On 15/01/2021 21:01, Paul Kocialkowski wrote:
> > This series introduces support for MIPI CSI-2, with the A31 controller that is
> > found on most SoCs (A31, V3s and probably V5) as well as the A83T-specific
> > controller. While the former uses the same MIPI D-PHY that is already supported
> > for DSI, the latter embeds its own D-PHY.
> >
> > In order to distinguish the use of the D-PHY between Rx mode (for MIPI CSI-2)
> > and Tx mode (for MIPI DSI), a submode is introduced for D-PHY in the PHY API.
> > This allows adding Rx support in the A31 D-PHY driver.
> >
> > A few changes and fixes are applied to the A31 CSI controller driver, in order
> > to support the MIPI CSI-2 use-case.
>
> Besides the compile error for patch 2/16, I also get several other compile errors:
>
> drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c: In function ‘sun6i_csi_v4l2_fwnode_init’:
> ./include/media/v4l2-async.h:207:10: error: expected expression before ‘)’ token
> 207 | ((type *) \
> | ^
> drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c:790:8: note: in expansion of macro ‘v4l2_async_notifier_add_fwnode_remote_subdev’
> 790 | ret = v4l2_async_notifier_add_fwnode_remote_subdev(&csi->notifier,
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> ./include/media/v4l2-async.h:207:10: error: expected expression before ‘)’ token
> 207 | ((type *) \
> | ^
> drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c:811:8: note: in expansion of macro ‘v4l2_async_notifier_add_fwnode_remote_subdev’
> 811 | ret = v4l2_async_notifier_add_fwnode_remote_subdev(&csi->notifier,
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> make[5]: *** [scripts/Makefile.build:272: drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.o] Error 1
> make[5]: *** Waiting for unfinished jobs....
> make[4]: *** [scripts/Makefile.build:272: drivers/media/platform/rockchip/rkisp1/rkisp1-isp.o] Error 1
> make[3]: *** [scripts/Makefile.build:515: drivers/media/platform/rockchip/rkisp1] Error 2
> make[3]: *** Waiting for unfinished jobs....
> In file included from ./include/media/v4l2-subdev.h:14,
> from ./include/media/v4l2-device.h:13,
> from drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c:19:
> drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c: In function ‘sun8i_a83t_mipi_csi2_v4l2_setup’:
> ./include/media/v4l2-async.h:207:10: error: expected expression before ‘)’ token
> 207 | ((type *) \
> | ^
> drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c:495:8: note: in expansion of macro
> ‘v4l2_async_notifier_add_fwnode_remote_subdev’
> 495 | ret = v4l2_async_notifier_add_fwnode_remote_subdev(notifier, handle,
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> In file included from ./include/media/v4l2-subdev.h:14,
> from ./include/media/v4l2-device.h:13,
> from drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c:18:
> drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c: In function ‘sun6i_mipi_csi2_v4l2_setup’:
> ./include/media/v4l2-async.h:207:10: error: expected expression before ‘)’ token
> 207 | ((type *) \
> | ^
> drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c:437:8: note: in expansion of macro ‘v4l2_async_notifier_add_fwnode_remote_subdev’
> 437 | ret = v4l2_async_notifier_add_fwnode_remote_subdev(notifier, handle,
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> Can you rebase this series?

Thanks for letting me know, I'll look into this for the next iteration.

> I also need Acked-by's for patches 1-3 from one of the PHY maintainers, but as
> you mentioned this might need to change as well.
>
> Was there a reason why I haven't looked at this before? It's quite an old series,
> usually I don't wait for so long. If it was because I was really slow, then I
> apologize and please kick me sooner if you see a review like this take so long.

I'm not sure, but Sakari definitely went over previous interations and made
various comments,so the series definitely hasn't gone unreviewed!

To be honest I also lost momentum on this but I'll be trying to finalize the
series soon, once the discussion on rx/tx handling has concluded.

Cheers,

Paul

>
> Regards,
>
> Hans
>
> >
> > Changes since v4:
> > - Added patch to stop using v4l2_async_notifier_parse_fwnode_endpoints;
> > - Fixed checkpatch strict issues (parenthesis alignment);
> > - Fixed runtime PM call order and disable;
> > - Fixed fwnode_handle_put order;
> > - Brought back phy-names for A31 since it's mandatory according to the generic
> > PHY binding and needed by the code;
> > - Added collected tags.
> >
> > Changes since v3:
> > - Fixed single-item phys description in sun6i mipi csi-2 binding;
> > - Fixed variables names in macros using container_of;
> > - Fixed style issue with operators at the end of lines;
> > - Reworked source endpoint/subdev assignment in sun6i-csi to handle
> > link_validate error case;
> > - Removed unrelated dt change in sun8i-a83t mipi csi-2 driver;
> > - Added collected tags.
> >
> > Changes since v2:
> > - added Kconfig depend on PM since it's not optional;
> > - removed phy-names for A31 MIPI CSI-2 controller;
> > - removed v3s compatible in the A31 MIPI CSI-2 controller driver;
> > - removed A31 CSI controller single-port binding deprecation;
> > - removed empty dt port definitions;
> > - fixed minor checkpatch warnings;
> > - added collected tags;
> > - added media-ctl output in cover letter.
> >
> > Changes since v1:
> > - reworked fwnode and media graph on the CSI controller end to have one port
> > per interface, which solves the bus type representation issue;
> > - removed unused IRQ handlers in the MIPI CSI-2 bridges;
> > - avoided the use of devm_regmap_init_mmio_clk;
> > - deasserted reset before enabling clocks;
> > - fixed reported return code issues (ret |=, missing checks);
> > - applied requested cosmetic changes (backward goto, etc);
> > - switched over to runtime PM for the mipi csi-2 bridge drivers;
> > - selected PHY_SUN6I_MIPI_DPHY in Kconfig for sun6i-mipi-csi2;
> > - registered nodes with mipi csi-2 bridge subdevs;
> > - used V4L2 format info instead of switch/case for sun6i-csi bpp;
> > - fixed device-tree bindings as requested (useless properties, license);
> > - fixed mipi bridge dt instances names;
> > - added PHY API documentation about mode/power on order requirement;
> > - fixed clock error return code in d-phy code;
> > - fixed D-PHY mode check in d-phy code;
> > - added MAINTAINERS entries for the new drivers;
> > - added V4L2 compliance results;
> > - added various comments and rework commit mesages as requested.
> >
> > Media ctl outputs for the testing setups are available below:
> >
> > # sun6i-csi + sun6i-mipi-csi2 + ov5648
> >
> > Media device information
> > ------------------------
> > driver sun6i-csi
> > model Allwinner Video Capture Device
> > serial
> > bus info platform:1cb0000.camera
> > hw revision 0x0
> > driver version 5.10.0
> >
> > Device topology
> > - entity 1: sun6i-csi (2 pads, 1 link)
> > type Node subtype V4L flags 0
> > device node name /dev/video0
> > pad0: Sink
> > pad1: Sink
> > <- "sun6i-mipi-csi2":1 [ENABLED]
> >
> > - entity 6: sun6i-mipi-csi2 (2 pads, 2 links)
> > type V4L2 subdev subtype Unknown flags 0
> > device node name /dev/v4l-subdev0
> > pad0: Sink
> > [fmt:unknown/0x0]
> > <- "ov5648 0-0036":0 [ENABLED,IMMUTABLE]
> > pad1: Source
> > [fmt:unknown/0x0]
> > -> "sun6i-csi":1 [ENABLED]
> >
> > - entity 9: ov5648 0-0036 (1 pad, 1 link)
> > type V4L2 subdev subtype Sensor flags 0
> > device node name /dev/v4l-subdev1
> > pad0: Source
> > [fmt:SBGGR8_1X8/2592x1944@1/15 field:none colorspace:raw xfer:none ycbcr:601 quantization:full-range]
> > -> "sun6i-mipi-csi2":0 [ENABLED,IMMUTABLE]
> >
> > # sun6i-csi + sun8i-a83t-mipi-csi2 + ov8865
> >
> > Media device information
> > ------------------------
> > driver sun6i-csi
> > model Allwinner Video Capture Device
> > serial
> > bus info platform:1cb0000.camera
> > hw revision 0x0
> > driver version 5.10.0
> >
> > Device topology
> > - entity 1: sun6i-csi (2 pads, 1 link)
> > type Node subtype V4L flags 0
> > device node name /dev/video0
> > pad0: Sink
> > pad1: Sink
> > <- "sun8i-a83t-mipi-csi2":1 [ENABLED]
> >
> > - entity 6: sun8i-a83t-mipi-csi2 (2 pads, 2 links)
> > type V4L2 subdev subtype Unknown flags 0
> > device node name /dev/v4l-subdev0
> > pad0: Sink
> > [fmt:unknown/0x0]
> > <- "ov8865 1-0036":0 [ENABLED,IMMUTABLE]
> > pad1: Source
> > [fmt:unknown/0x0]
> > -> "sun6i-csi":1 [ENABLED]
> >
> > - entity 9: ov8865 1-0036 (1 pad, 1 link)
> > type V4L2 subdev subtype Sensor flags 0
> > device node name /dev/v4l-subdev1
> > pad0: Source
> > [fmt:SBGGR10_1X10/3264x2448@1/30 field:none colorspace:raw xfer:none ycbcr:601 quantization:full-range]
> > -> "sun8i-a83t-mipi-csi2":0 [ENABLED,IMMUTABLE]
> >
> > V4L2 compliance runs are available below:
> >
> > # sun6i-csi + sun6i-mipi-csi2 + ov5648
> >
> > v4l2-compliance SHA: not available, 32 bits
> >
> > Compliance test for sun6i-video device /dev/video0:
> >
> > Driver Info:
> > Driver name : sun6i-video
> > Card type : sun6i-csi
> > Bus info : platform:camera
> > Driver version : 5.10.0
> > Capabilities : 0x84200001
> > Video Capture
> > Streaming
> > Extended Pix Format
> > Device Capabilities
> > Device Caps : 0x04200001
> > Video Capture
> > Streaming
> > Extended Pix Format
> > Media Driver Info:
> > Driver name : sun6i-csi
> > Model : Allwinner Video Capture Device
> > Serial :
> > Bus info : platform:1cb0000.camera
> > Media version : 5.10.0
> > Hardware revision: 0x00000000 (0)
> > Driver version : 5.10.0
> > Interface Info:
> > ID : 0x03000004
> > Type : V4L Video
> > Entity Info:
> > ID : 0x00000001 (1)
> > Name : sun6i-csi
> > Function : V4L2 I/O
> > Pad 0x01000002 : 0: Sink
> > Pad 0x01000003 : 1: Sink
> > Link 0x0200000d: from remote pad 0x1000008 of entity 'sun6i-mipi-csi2': Data, Enabled
> >
> > Required ioctls:
> > test MC information (see 'Media Driver Info' above): OK
> > warn: v4l2-compliance.cpp(633): media bus_info 'platform:1cb0000.camera' differs from V4L2 bus_info 'platform:camera'
> > test VIDIOC_QUERYCAP: OK
> >
> > Allow for multiple opens:
> > test second /dev/video0 open: OK
> > warn: v4l2-compliance.cpp(633): media bus_info 'platform:1cb0000.camera' differs from V4L2 bus_info 'platform:camera'
> > test VIDIOC_QUERYCAP: OK
> > test VIDIOC_G/S_PRIORITY: OK
> > test for unlimited opens: OK
> >
> > Debug ioctls:
> > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> > test VIDIOC_LOG_STATUS: OK
> >
> > Input ioctls:
> > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > test VIDIOC_G/S/ENUMINPUT: OK
> > test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > Inputs: 1 Audio Inputs: 0 Tuners: 0
> >
> > Output ioctls:
> > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > Outputs: 0 Audio Outputs: 0 Modulators: 0
> >
> > Input/Output configuration ioctls:
> > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > test VIDIOC_G/S_EDID: OK (Not Supported)
> >
> > Control ioctls (Input 0):
> > warn: v4l2-test-controls.cpp(92): Exposure: (max - min) % step != 0
> > warn: v4l2-test-controls.cpp(92): Gain: (max - min) % step != 0
> > warn: v4l2-test-controls.cpp(92): Exposure: (max - min) % step != 0
> > warn: v4l2-test-controls.cpp(92): Gain: (max - min) % step != 0
> > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> > test VIDIOC_QUERYCTRL: OK
> > warn: v4l2-test-controls.cpp(368): Gain: returned control value 44 not a multiple of step
> > warn: v4l2-test-controls.cpp(368): Gain: returned control value 44 not a multiple of step
> > warn: v4l2-test-controls.cpp(368): Gain: returned control value 44 not a multiple of step
> > warn: v4l2-test-controls.cpp(368): Gain: returned control value 44 not a multiple of step
> > test VIDIOC_G/S_CTRL: OK
> > warn: v4l2-test-controls.cpp(555): Gain: returned control value 44 not a multiple of step
> > test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > Standard Controls: 15 Private Controls: 0
> >
> > Format ioctls (Input 0):
> > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> > test VIDIOC_G/S_PARM: OK (Not Supported)
> > test VIDIOC_G_FBUF: OK (Not Supported)
> > test VIDIOC_G_FMT: OK
> > test VIDIOC_TRY_FMT: OK
> > test VIDIOC_S_FMT: OK
> > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > test Cropping: OK (Not Supported)
> > test Composing: OK (Not Supported)
> > test Scaling: OK
> >
> > Codec ioctls (Input 0):
> > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >
> > Buffer ioctls (Input 0):
> > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> > fail: v4l2-test-buffers.cpp(755): q.export_bufs(node, q.g_type())
> > test VIDIOC_EXPBUF: FAIL
> > test Requests: OK (Not Supported)
> >
> > Total for sun6i-video device /dev/video0: 45, Succeeded: 44, Failed: 1, Warnings: 1
> >
> > # sun6i-csi + sun8i-a83t-mipi-csi2 + ov8865
> >
> > v4l2-compliance SHA: not available, 32 bits
> >
> > Compliance test for sun6i-video device /dev/video0:
> >
> > Driver Info:
> > Driver name : sun6i-video
> > Card type : sun6i-csi
> > Bus info : platform:camera
> > Driver version : 5.10.0
> > Capabilities : 0x84200001
> > Video Capture
> > Streaming
> > Extended Pix Format
> > Device Capabilities
> > Device Caps : 0x04200001
> > Video Capture
> > Streaming
> > Extended Pix Format
> > Media Driver Info:
> > Driver name : sun6i-csi
> > Model : Allwinner Video Capture Device
> > Serial :
> > Bus info : platform:1cb0000.camera
> > Media version : 5.10.0
> > Hardware revision: 0x00000000 (0)
> > Driver version : 5.10.0
> > Interface Info:
> > ID : 0x03000004
> > Type : V4L Video
> > Entity Info:
> > ID : 0x00000001 (1)
> > Name : sun6i-csi
> > Function : V4L2 I/O
> > Pad 0x01000002 : 0: Sink
> > Pad 0x01000003 : 1: Sink
> > Link 0x0200000d: from remote pad 0x1000008 of entity 'sun8i-a83t-mipi-csi2': Data, Enabled
> >
> > Required ioctls:
> > test MC information (see 'Media Driver Info' above): OK
> > warn: v4l2-compliance.cpp(633): media bus_info 'platform:1cb0000.camera' differs from V4L2 bus_info 'platform:camera'
> > test VIDIOC_QUERYCAP: OK
> >
> > Allow for multiple opens:
> > test second /dev/video0 open: OK
> > warn: v4l2-compliance.cpp(633): media bus_info 'platform:1cb0000.camera' differs from V4L2 bus_info 'platform:camera'
> > test VIDIOC_QUERYCAP: OK
> > test VIDIOC_G/S_PRIORITY: OK
> > test for unlimited opens: OK
> >
> > Debug ioctls:
> > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> > test VIDIOC_LOG_STATUS: OK
> >
> > Input ioctls:
> > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > test VIDIOC_G/S/ENUMINPUT: OK
> > test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > Inputs: 1 Audio Inputs: 0 Tuners: 0
> >
> > Output ioctls:
> > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > Outputs: 0 Audio Outputs: 0 Modulators: 0
> >
> > Input/Output configuration ioctls:
> > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > test VIDIOC_G/S_EDID: OK (Not Supported)
> >
> > Control ioctls (Input 0):
> > warn: v4l2-test-controls.cpp(92): Exposure: (max - min) % step != 0
> > warn: v4l2-test-controls.cpp(92): Gain: (max - min) % step != 0
> > warn: v4l2-test-controls.cpp(92): Exposure: (max - min) % step != 0
> > warn: v4l2-test-controls.cpp(92): Gain: (max - min) % step != 0
> > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> > test VIDIOC_QUERYCTRL: OK
> > test VIDIOC_G/S_CTRL: OK
> > test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > Standard Controls: 11 Private Controls: 0
> >
> > Format ioctls (Input 0):
> > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> > test VIDIOC_G/S_PARM: OK (Not Supported)
> > test VIDIOC_G_FBUF: OK (Not Supported)
> > test VIDIOC_G_FMT: OK
> > test VIDIOC_TRY_FMT: OK
> > test VIDIOC_S_FMT: OK
> > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > test Cropping: OK (Not Supported)
> > test Composing: OK (Not Supported)
> > test Scaling: OK
> >
> > Codec ioctls (Input 0):
> > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >
> > Buffer ioctls (Input 0):
> > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> > test VIDIOC_EXPBUF: OK
> > test Requests: OK (Not Supported)
> >
> > Total for sun6i-video device /dev/video0: 45, Succeeded: 45, Failed: 0, Warnings: 6
> >
> > Paul Kocialkowski (16):
> > docs: phy: Add a part about PHY mode and submode
> > phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes
> > phy: allwinner: phy-sun6i-mipi-dphy: Support D-PHY Rx mode for MIPI
> > CSI-2
> > media: sun6i-csi: Stop using the deprecated fwnode endpoint parser
> > media: sun6i-csi: Use common V4L2 format info for storage bpp
> > media: sun6i-csi: Only configure the interface data width for parallel
> > dt-bindings: media: sun6i-a31-csi: Add MIPI CSI-2 input port
> > media: sun6i-csi: Add support for MIPI CSI-2 bridge input
> > dt-bindings: media: Add A31 MIPI CSI-2 bindings documentation
> > media: sunxi: Add support for the A31 MIPI CSI-2 controller
> > ARM: dts: sun8i: v3s: Add nodes for MIPI CSI-2 support
> > MAINTAINERS: Add entry for the Allwinner A31 MIPI CSI-2 bridge
> > dt-bindings: media: Add A83T MIPI CSI-2 bindings documentation
> > media: sunxi: Add support for the A83T MIPI CSI-2 controller
> > ARM: dts: sun8i: a83t: Add MIPI CSI-2 controller node
> > MAINTAINERS: Add entry for the Allwinner A83T MIPI CSI-2 bridge
> >
> > .../media/allwinner,sun6i-a31-csi.yaml | 88 ++-
> > .../media/allwinner,sun6i-a31-mipi-csi2.yaml | 156 ++++
> > .../media/allwinner,sun8i-a83t-mipi-csi2.yaml | 147 ++++
> > Documentation/driver-api/phy/phy.rst | 18 +
> > MAINTAINERS | 16 +
> > arch/arm/boot/dts/sun8i-a83t.dtsi | 26 +
> > arch/arm/boot/dts/sun8i-v3s.dtsi | 68 ++
> > .../platform/rockchip/rkisp1/rkisp1-isp.c | 3 +-
> > drivers/media/platform/sunxi/Kconfig | 2 +
> > drivers/media/platform/sunxi/Makefile | 2 +
> > .../platform/sunxi/sun6i-csi/sun6i_csi.c | 218 ++++--
> > .../platform/sunxi/sun6i-csi/sun6i_csi.h | 65 +-
> > .../platform/sunxi/sun6i-csi/sun6i_video.c | 57 +-
> > .../platform/sunxi/sun6i-csi/sun6i_video.h | 7 +-
> > .../platform/sunxi/sun6i-mipi-csi2/Kconfig | 12 +
> > .../platform/sunxi/sun6i-mipi-csi2/Makefile | 4 +
> > .../sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c | 600 ++++++++++++++++
> > .../sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h | 117 +++
> > .../sunxi/sun8i-a83t-mipi-csi2/Kconfig | 11 +
> > .../sunxi/sun8i-a83t-mipi-csi2/Makefile | 4 +
> > .../sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c | 92 +++
> > .../sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.h | 39 +
> > .../sun8i_a83t_mipi_csi2.c | 666 ++++++++++++++++++
> > .../sun8i_a83t_mipi_csi2.h | 197 ++++++
> > drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 164 ++++-
> > include/linux/phy/phy-mipi-dphy.h | 13 +
> > 26 files changed, 2651 insertions(+), 141 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
> > create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml
> > create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig
> > create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/Makefile
> > create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c
> > create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h
> > create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/Kconfig
> > create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/Makefile
> > create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c
> > create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.h
> > create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c
> > create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.h
> >
>

--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com

Attachment: signature.asc
Description: PGP signature

Next message: YueHaibing: "[PATCH -next] RDMA/core: use DEVICE_ATTR_RO macro"
Previous message: YueHaibing: "[PATCH -next] IB/ipoib: use DEVICE_ATTR_*() macro"
In reply to: Hans Verkuil: "Re: [PATCH v5 00/16] Allwinner MIPI CSI-2 support for A31/V3s/A83T"
Next in thread: Sakari Ailus: "Re: [PATCH v5 00/16] Allwinner MIPI CSI-2 support for A31/V3s/A83T"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]