[PATCH V1 2/4] MIPS: Loongson1B: Add Loongson1 dmaengine device
From: Keguang Zhang
Date: Wed May 26 2021 - 09:31:58 EST
From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
This patch adds DMA Engine device its platform data for Loongson1B.
Signed-off-by: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
---
.../include/asm/mach-loongson32/platform.h | 2 ++
arch/mips/loongson32/common/platform.c | 36 +++++++++++++++++++
arch/mips/loongson32/ls1b/board.c | 15 +++++++-
3 files changed, 52 insertions(+), 1 deletion(-)
diff --git a/arch/mips/include/asm/mach-loongson32/platform.h b/arch/mips/include/asm/mach-loongson32/platform.h
index eb83e2741887..d4d2a9baacdb 100644
--- a/arch/mips/include/asm/mach-loongson32/platform.h
+++ b/arch/mips/include/asm/mach-loongson32/platform.h
@@ -13,6 +13,7 @@
extern struct platform_device ls1x_uart_pdev;
extern struct platform_device ls1x_cpufreq_pdev;
+extern struct platform_device ls1x_dma_pdev;
extern struct platform_device ls1x_eth0_pdev;
extern struct platform_device ls1x_eth1_pdev;
extern struct platform_device ls1x_ehci_pdev;
@@ -22,6 +23,7 @@ extern struct platform_device ls1x_rtc_pdev;
extern struct platform_device ls1x_wdt_pdev;
void __init ls1x_clk_init(void);
+void __init ls1x_dma_set_platdata(struct plat_ls1x_dma *pdata);
void __init ls1x_rtc_set_extclk(struct platform_device *pdev);
void __init ls1x_serial_set_uartclk(struct platform_device *pdev);
diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c
index 794c96c2a4cd..2092a7ff32e0 100644
--- a/arch/mips/loongson32/common/platform.c
+++ b/arch/mips/loongson32/common/platform.c
@@ -77,6 +77,42 @@ struct platform_device ls1x_cpufreq_pdev = {
},
};
+/* DMA */
+static struct resource ls1x_dma_resources[] = {
+ [0] = {
+ .start = LS1X_DMAC_BASE,
+ .end = LS1X_DMAC_BASE + SZ_4 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = LS1X_DMA0_IRQ,
+ .end = LS1X_DMA0_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = LS1X_DMA1_IRQ,
+ .end = LS1X_DMA1_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = LS1X_DMA2_IRQ,
+ .end = LS1X_DMA2_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device ls1x_dma_pdev = {
+ .name = "ls1x-dma",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ls1x_dma_resources),
+ .resource = ls1x_dma_resources,
+};
+
+void __init ls1x_dma_set_platdata(struct plat_ls1x_dma *pdata)
+{
+ ls1x_dma_pdev.dev.platform_data = pdata;
+}
+
/* Synopsys Ethernet GMAC */
static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = {
.phy_mask = 0,
diff --git a/arch/mips/loongson32/ls1b/board.c b/arch/mips/loongson32/ls1b/board.c
index 727e06718dab..2be4d8544444 100644
--- a/arch/mips/loongson32/ls1b/board.c
+++ b/arch/mips/loongson32/ls1b/board.c
@@ -12,6 +12,17 @@
#include <nand.h>
#include <platform.h>
+static const struct dma_slave_map ls1x_dma_slave_map[] = {
+ { "ls1x-nand", "dmachan0", (void *)LS1X_DMA_CHANNEL0 },
+ { "ls1x-ac97", "dmachan1", (void *)LS1X_DMA_CHANNEL1 },
+ { "ls1x-ac97", "dmachan2", (void *)LS1X_DMA_CHANNEL2 },
+};
+
+struct plat_ls1x_dma ls1x_dma_pdata = {
+ .slave_map = ls1x_dma_slave_map,
+ .slavecnt = ARRAY_SIZE(ls1x_dma_slave_map),
+};
+
static const struct gpio_led ls1x_gpio_leds[] __initconst = {
{
.name = "LED9",
@@ -36,6 +47,7 @@ static const struct gpio_led_platform_data ls1x_led_pdata __initconst = {
static struct platform_device *ls1b_platform_devices[] __initdata = {
&ls1x_uart_pdev,
&ls1x_cpufreq_pdev,
+ &ls1x_dma_pdev,
&ls1x_eth0_pdev,
&ls1x_eth1_pdev,
&ls1x_ehci_pdev,
@@ -48,11 +60,12 @@ static struct platform_device *ls1b_platform_devices[] __initdata = {
static int __init ls1b_platform_init(void)
{
ls1x_serial_set_uartclk(&ls1x_uart_pdev);
+ ls1x_dma_set_platdata(&ls1x_dma_pdata);
gpio_led_register_device(-1, &ls1x_led_pdata);
return platform_add_devices(ls1b_platform_devices,
- ARRAY_SIZE(ls1b_platform_devices));
+ ARRAY_SIZE(ls1b_platform_devices));
}
arch_initcall(ls1b_platform_init);
--
2.30.2