Re: [PATCH 04/10] media: hantro: add support for Rockchip RK3066
From: Alex Bee
Date: Wed May 26 2021 - 19:22:15 EST
Hi Ezequiel,
thanks for your feedback.
Am 26.05.21 um 12:32 schrieb Ezequiel Garcia:
Hi Alex,
Thanks for the patch.
On Tue, 2021-05-25 at 17:22 +0200, Alex Bee wrote:
RK3066's VPU IP block is the predecessor from what RK3288 has.
The hardware differences are:
- supports decoding frame sizes up to 1920x1088 only
- doesn't have the 'G1_REG_SOFT_RESET' register
(requires another .reset callback for hantro_codec_ops,
since writing this register will result in non-working
IP block)
- has one ACLK/HCLK per vdpu/vepu
- ACLKs can be clocked up to 300 MHz only
- no MMU
(no changes required: CMA will be transparently used)
Add a new RK3066 variant which reflect this differences. This variant
can be used for RK3188 as well.
Signed-off-by: Alex Bee <knaerzche@xxxxxxxxx>
---
drivers/staging/media/hantro/hantro_drv.c | 1 +
drivers/staging/media/hantro/hantro_hw.h | 1 +
drivers/staging/media/hantro/rk3288_vpu_hw.c | 116 +++++++++++++++++++
3 files changed, 118 insertions(+)
diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
index 2f6b01c7a6a0..38ea7b24036e 100644
--- a/drivers/staging/media/hantro/hantro_drv.c
+++ b/drivers/staging/media/hantro/hantro_drv.c
@@ -489,6 +489,7 @@ static const struct of_device_id of_hantro_match[] = {
{ .compatible = "rockchip,rk3399-vpu", .data = &rk3399_vpu_variant, },
{ .compatible = "rockchip,rk3328-vpu", .data = &rk3328_vpu_variant, },
{ .compatible = "rockchip,rk3288-vpu", .data = &rk3288_vpu_variant, },
+ { .compatible = "rockchip,rk3066-vpu", .data = &rk3066_vpu_variant, },
#endif
#ifdef CONFIG_VIDEO_HANTRO_IMX8M
{ .compatible = "nxp,imx8mq-vpu", .data = &imx8mq_vpu_variant, },
diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
index 3d8b53567f16..de2bc367a15a 100644
--- a/drivers/staging/media/hantro/hantro_hw.h
+++ b/drivers/staging/media/hantro/hantro_hw.h
@@ -163,6 +163,7 @@ enum hantro_enc_fmt {
extern const struct hantro_variant rk3399_vpu_variant;
extern const struct hantro_variant rk3328_vpu_variant;
extern const struct hantro_variant rk3288_vpu_variant;
+extern const struct hantro_variant rk3066_vpu_variant;
extern const struct hantro_variant imx8mq_vpu_variant;
extern const struct hantro_variant sama5d4_vdec_variant;
diff --git a/drivers/staging/media/hantro/rk3288_vpu_hw.c b/drivers/staging/media/hantro/rk3288_vpu_hw.c
index fefd45269e52..29805c4bd92f 100644
--- a/drivers/staging/media/hantro/rk3288_vpu_hw.c
+++ b/drivers/staging/media/hantro/rk3288_vpu_hw.c
@@ -10,8 +10,10 @@
#include "hantro.h"
#include "hantro_jpeg.h"
+#include "hantro_g1_regs.h"
#include "hantro_h1_regs.h"
+#define RK3066_ACLK_MAX_FREQ (300 * 1000 * 1000)
#define RK3288_ACLK_MAX_FREQ (400 * 1000 * 1000)
/*
@@ -62,6 +64,52 @@ static const struct hantro_fmt rk3288_vpu_postproc_fmts[] = {
},
};
+static const struct hantro_fmt rk3066_vpu_dec_fmts[] = {
+ {
+ .fourcc = V4L2_PIX_FMT_NV12,
+ .codec_mode = HANTRO_MODE_NONE,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_H264_SLICE,
+ .codec_mode = HANTRO_MODE_H264_DEC,
+ .max_depth = 2,
+ .frmsize = {
+ .min_width = 48,
+ .max_width = 1920,
+ .step_width = MB_DIM,
+ .min_height = 48,
+ .max_height = 1088,
+ .step_height = MB_DIM,
+ },
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_MPEG2_SLICE,
+ .codec_mode = HANTRO_MODE_MPEG2_DEC,
+ .max_depth = 2,
+ .frmsize = {
+ .min_width = 48,
+ .max_width = 1920,
+ .step_width = MB_DIM,
+ .min_height = 48,
+ .max_height = 1088,
+ .step_height = MB_DIM,
+ },
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_VP8_FRAME,
+ .codec_mode = HANTRO_MODE_VP8_DEC,
+ .max_depth = 2,
+ .frmsize = {
+ .min_width = 48,
+ .max_width = 1920,
+ .step_width = MB_DIM,
+ .min_height = 48,
+ .max_height = 1088,
+ .step_height = MB_DIM,
+ },
+ },
+};
+
static const struct hantro_fmt rk3288_vpu_dec_fmts[] = {
{
.fourcc = V4L2_PIX_FMT_NV12,
@@ -126,6 +174,14 @@ static irqreturn_t rk3288_vepu_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static int rk3066_vpu_hw_init(struct hantro_dev *vpu)
+{
+ /* Bump ACLKs to max. possible freq. to improve performance. */
+ clk_set_rate(vpu->clocks[0].clk, RK3066_ACLK_MAX_FREQ);
+ clk_set_rate(vpu->clocks[0].clk, RK3066_ACLK_MAX_FREQ);
+ return 0;
+}
+
static int rk3288_vpu_hw_init(struct hantro_dev *vpu)
{
/* Bump ACLK to max. possible freq. to improve performance. */
@@ -133,6 +189,14 @@ static int rk3288_vpu_hw_init(struct hantro_dev *vpu)
return 0;
}
+static void rk3066_vpu_dec_reset(struct hantro_ctx *ctx)
+{
+ struct hantro_dev *vpu = ctx->dev;
+
+ vdpu_write(vpu, G1_REG_INTERRUPT_DEC_IRQ_DIS, G1_REG_INTERRUPT);
+ vdpu_write(vpu, G1_REG_CONFIG_DEC_CLK_GATE_E, G1_REG_CONFIG);
+}
+
static void rk3288_vpu_enc_reset(struct hantro_ctx *ctx)
{
struct hantro_dev *vpu = ctx->dev;
@@ -145,6 +209,33 @@ static void rk3288_vpu_enc_reset(struct hantro_ctx *ctx)
/*
* Supported codec ops.
*/
+static const struct hantro_codec_ops rk3066_vpu_codec_ops[] = {
+ [HANTRO_MODE_JPEG_ENC] = {
+ .run = hantro_h1_jpeg_enc_run,
+ .reset = rk3288_vpu_enc_reset,
+ .init = hantro_jpeg_enc_init,
+ .done = hantro_jpeg_enc_done,
+ .exit = hantro_jpeg_enc_exit,
+ },
+ [HANTRO_MODE_H264_DEC] = {
+ .run = hantro_g1_h264_dec_run,
+ .reset = rk3066_vpu_dec_reset,
+ .init = hantro_h264_dec_init,
+ .exit = hantro_h264_dec_exit,
+ },
+ [HANTRO_MODE_MPEG2_DEC] = {
+ .run = hantro_g1_mpeg2_dec_run,
+ .reset = rk3066_vpu_dec_reset,
+ .init = hantro_mpeg2_dec_init,
+ .exit = hantro_mpeg2_dec_exit,
+ },
+ [HANTRO_MODE_VP8_DEC] = {
+ .run = hantro_g1_vp8_dec_run,
+ .reset = rk3066_vpu_dec_reset,
+ .init = hantro_vp8_dec_init,
+ .exit = hantro_vp8_dec_exit,
+ },
+};
static const struct hantro_codec_ops rk3288_vpu_codec_ops[] = {
[HANTRO_MODE_JPEG_ENC] = {
@@ -183,10 +274,35 @@ static const struct hantro_irq rk3288_irqs[] = {
{ "vdpu", hantro_g1_irq },
};
+static const char * const rk3066_clk_names[] = {
+ "aclk_vdpu", "hclk_vdpu",
+ "aclk_vepu", "hclk_vepu"
+};
+
static const char * const rk3288_clk_names[] = {
"aclk", "hclk"
};
+const struct hantro_variant rk3066_vpu_variant = {
+ .enc_offset = 0x0,
+ .enc_fmts = rk3288_vpu_enc_fmts,
+ .num_enc_fmts = ARRAY_SIZE(rk3288_vpu_enc_fmts),
+ .dec_offset = 0x400,
Having decoder and encoder supported by a single devicetree
node was done for RK3288 to cope with some bug in the hardware
that was effectively linking the decoder and the encoder.
AFAIK, Rockchip has fixed this, so unless there's a strong
need, I prefer we keep them separated, with one DT node
for the g1 decoder and one for the h1 encoder.
Thanks!
Ezequiel
I just checked it: despite it looks like we could use the decoder and
encoder separately
(separate clocks for decoder / encoder) the VPU block won't work (SoC
crashes),
if not all 4 clocks are enabled for neither decoding nor encoding.
I'd prefer the other way also, but it seems not possible.
Alex.