[PATCH v3 0/2] Add the driver for Intel Keem Bay SoC timer block

[shruthi . sanil]

From: Shruthi Sanil <shruthi.sanil@xxxxxxxxx>

The timer block supports 1 64-bit free running counter
and 8 32-bit general purpose timers.

Patch 1 holds the device tree binding documentation.
Patch 2 holds the device driver.

This driver is tested on the Keem Bay evaluation module board.

I would like to inform that, I would be taking the ownership
of this patch series from this version.

Changes since v2:
- Add multi timer support.
- Update in the device tree binding to support multi timers.
- Code optimization.

Changes since v1:
- Add support for KEEMBAY_TIMER to get selected through Kconfig.platforms.
- Add CLOCK_EVT_FEAT_DYNIRQ as part of clockevent feature.
- Avoid overlapping reg regions across 2 device nodes.
- Simplify 2 device nodes as 1 because both are from same IP block.
- Adapt the driver code according to the new simplified devicetree.

Shruthi Sanil (2):
  dt-bindings: timer: Add bindings for Intel Keem Bay SoC Timer
  clocksource: Add Intel Keem Bay timer support

 .../bindings/timer/intel,keembay-timer.yaml   | 180 +++++++++++++
 MAINTAINERS                                   |   5 +
 drivers/clocksource/Kconfig                   |  11 +
 drivers/clocksource/Makefile                  |   1 +
 drivers/clocksource/timer-keembay.c           | 255 ++++++++++++++++++
 5 files changed, 452 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/intel,keembay-timer.yaml
 create mode 100644 drivers/clocksource/timer-keembay.c


base-commit: ad9f25d338605d26acedcaf3ba5fab5ca26f1c10
-- 
2.17.1