[PATCH 1/3] dt-bindings: watchdog: sama5d4-wdt: convert to yaml

[Eugen Hristev]

Convert the old txt binding to yaml format.

Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
---
 .../bindings/watchdog/atmel,sama5d4-wdt.yaml  | 73 +++++++++++++++++++
 .../bindings/watchdog/atmel-sama5d4-wdt.txt   | 34 ---------
 2 files changed, 73 insertions(+), 34 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml
 delete mode 100644 Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt

diff --git a/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml
new file mode 100644
index 000000000000..0d0ab81da040
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/atmel,sama5d4-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel SAMA5D4 Watchdog Timer (WDT) Controller
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - atmel,sama5d4-wdt
+      - microchip,sam9x60-wdt
+
+  reg:
+    maxItems: 1
+
+  atmel,watchdog-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: should be hardware or software.
+    oneOf:
+      - description:
+          Enable watchdog fault reset. A watchdog fault triggers
+          watchdog reset.
+        const: hardware
+      - description:
+          Enable watchdog fault interrupt. A watchdog fault asserts
+          watchdog interrupt.
+        const: software
+    default: hardware
+
+  atmel,idle-halt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      present if you want to stop the watchdog when the CPU is in idle state.
+      CAUTION: This property should be used with care, it actually makes the
+      watchdog not counting when the CPU is in idle state, therefore the
+      watchdog reset time depends on mean CPU usage and will not reset at all
+      if the CPU stop working while it is in idle state, which is probably
+      not what you want.
+
+  atmel,dbg-halt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      present if you want to stop the watchdog when the CPU is in debug state.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    watchdog@fc068640 {
+      compatible = "atmel,sama5d4-wdt";
+      reg = <0xfc068640 0x10>;
+      interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>;
+      timeout-sec = <10>;
+      atmel,watchdog-type = "hardware";
+      atmel,dbg-halt;
+      atmel,idle-halt;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt
deleted file mode 100644
index 44727fcc2729..000000000000
--- a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-* Atmel SAMA5D4 Watchdog Timer (WDT) Controller
-
-Required properties:
-- compatible: "atmel,sama5d4-wdt" or "microchip,sam9x60-wdt"
-- reg: base physical address and length of memory mapped region.
-
-Optional properties:
-- timeout-sec: watchdog timeout value (in seconds).
-- interrupts: interrupt number to the CPU.
-- atmel,watchdog-type: should be "hardware" or "software".
-	"hardware": enable watchdog fault reset. A watchdog fault triggers
-		    watchdog reset.
-	"software": enable watchdog fault interrupt. A watchdog fault asserts
-		    watchdog interrupt.
-- atmel,idle-halt: present if you want to stop the watchdog when the CPU is
-		   in idle state.
-	CAUTION: This property should be used with care, it actually makes the
-	watchdog not counting when the CPU is in idle state, therefore the
-	watchdog reset time depends on mean CPU usage and will not reset at all
-	if the CPU stop working while it is in idle state, which is probably
-	not what you want.
-- atmel,dbg-halt: present if you want to stop the watchdog when the CPU is
-		  in debug state.
-
-Example:
-	watchdog@fc068640 {
-		compatible = "atmel,sama5d4-wdt";
-		reg = <0xfc068640 0x10>;
-		interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>;
-		timeout-sec = <10>;
-		atmel,watchdog-type = "hardware";
-		atmel,dbg-halt;
-		atmel,idle-halt;
-	};
-- 
2.25.1