Re: [PATCH v2 04/18] phy: cdns-dphy: Add Rx support
From: Tomi Valkeinen
Date: Fri May 28 2021 - 02:10:12 EST
On 26/05/2021 18:22, Pratyush Yadav wrote:
The Cadence DPHY can be used to receive image data over the CSI-2
protocol. Add support for Rx mode. The programming sequence differs from
the Tx mode so it is added as a separate set of hooks to isolate the two
paths.
The PHY is in Tx mode by default and it needs to be set in Rx mode by
setting the submode to PHY_MIPI_DPHY_SUBMODE_RX in the set_mode()
callback.
Signed-off-by: Pratyush Yadav <p.yadav@xxxxxx>
---
(no changes since v1)
drivers/phy/cadence/cdns-dphy.c | 237 ++++++++++++++++++++++++++++++++
1 file changed, 237 insertions(+)
diff --git a/drivers/phy/cadence/cdns-dphy.c b/drivers/phy/cadence/cdns-dphy.c
index 7d5f7b333893..7bbca679e2bb 100644
--- a/drivers/phy/cadence/cdns-dphy.c
+++ b/drivers/phy/cadence/cdns-dphy.c
@@ -1,11 +1,14 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright: 2017-2018 Cadence Design Systems, Inc.
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
*/
#include <linux/bitops.h>
+#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
@@ -25,10 +28,14 @@
#define DPHY_PMA_RCLK(reg) (0x600 + (reg))
#define DPHY_PMA_RDATA(lane, reg) (0x700 + ((lane) * 0x100) + (reg))
#define DPHY_PCS(reg) (0xb00 + (reg))
+#define DPHY_ISO(reg) (0xc00 + (reg))
#define DPHY_CMN_SSM DPHY_PMA_CMN(0x20)
#define DPHY_CMN_SSM_EN BIT(0)
+#define DPHY_CMN_RX_BANDGAP_TIMER_MASK GENMASK(8, 1)
#define DPHY_CMN_TX_MODE_EN BIT(9)
+#define DPHY_CMN_RX_MODE_EN BIT(10)
+#define DPHY_CMN_RX_BANDGAP_TIMER 0x14
#define DPHY_CMN_PWM DPHY_PMA_CMN(0x40)
#define DPHY_CMN_PWM_DIV(x) ((x) << 20)
@@ -45,10 +52,27 @@
#define DPHY_CMN_OPDIV_FROM_REG BIT(6)
#define DPHY_CMN_OPDIV(x) ((x) << 7)
+#define DPHY_BAND_CFG DPHY_PCS(0x0)
+#define DPHY_BAND_CFG_LEFT_BAND GENMASK(4, 0)
+#define DPHY_BAND_CFG_RIGHT_BAND GENMASK(9, 5)
+
#define DPHY_PSM_CFG DPHY_PCS(0x4)
#define DPHY_PSM_CFG_FROM_REG BIT(0)
#define DPHY_PSM_CLK_DIV(x) ((x) << 1)
+#define DPHY_POWER_ISLAND_EN_DATA DPHY_PCS(0x8)
+#define DPHY_POWER_ISLAND_EN_DATA_VAL 0xaaaaaaaa
+#define DPHY_POWER_ISLAND_EN_CLK DPHY_PCS(0xc)
+#define DPHY_POWER_ISLAND_EN_CLK_VAL 0xaa
+
+#define DPHY_ISO_CL_CTRL_L DPHY_ISO(0x10)
+#define DPHY_ISO_DL_CTRL_L0 DPHY_ISO(0x14)
+#define DPHY_ISO_DL_CTRL_L1 DPHY_ISO(0x20)
+#define DPHY_ISO_DL_CTRL_L2 DPHY_ISO(0x30)
+#define DPHY_ISO_DL_CTRL_L3 DPHY_ISO(0x3c)
+#define DPHY_ISO_LANE_READY_BIT 0
+#define DPHY_ISO_LANE_READY_TIMEOUT_MS 100UL
+
#define DSI_HBP_FRAME_OVERHEAD 12
#define DSI_HSA_FRAME_OVERHEAD 14
#define DSI_HFP_FRAME_OVERHEAD 6
@@ -57,6 +81,9 @@
#define DSI_NULL_FRAME_OVERHEAD 6
#define DSI_EOT_PKT_SIZE 4
+#define DPHY_LANES_MIN 1
+#define DPHY_LANES_MAX 4
+
struct cdns_dphy_cfg {
u8 pll_ipdiv;
u8 pll_opdiv;
@@ -312,6 +339,214 @@ static const struct cdns_dphy_ops tx_ref_dphy_ops = {
.set_psm_div = cdns_dphy_ref_set_psm_div,
};
+static int cdns_dphy_rx_power_on(struct cdns_dphy *dphy)
+{
+ /* Start RX state machine. */
+ writel(DPHY_CMN_SSM_EN | DPHY_CMN_RX_MODE_EN |
+ FIELD_PREP(DPHY_CMN_RX_BANDGAP_TIMER_MASK,
+ DPHY_CMN_RX_BANDGAP_TIMER),
+ dphy->regs + DPHY_CMN_SSM);
+
+ return 0;
+}
+
+static int cdns_dphy_rx_power_off(struct cdns_dphy *dphy)
+{
+ writel(0, dphy->regs + DPHY_CMN_SSM);
+
+ return 0;
+}
+
+static int cdns_dphy_rx_get_band_ctrl(unsigned long hs_clk_rate)
+{
+ unsigned int rate = hs_clk_rate / 1000000UL;
+
+ if (rate < 80 || rate >= 2500)
+ return -EOPNOTSUPP;
+
+ if (rate >= 80 && rate < 100)
+ return 0;
+
+ if (rate >= 100 && rate < 120)
+ return 1;
+
+ if (rate >= 120 && rate < 160)
+ return 2;
+
+ if (rate >= 160 && rate < 200)
+ return 3;
+
+ if (rate >= 200 && rate < 240)
+ return 4;
+
+ if (rate >= 240 && rate < 280)
+ return 5;
+
+ if (rate >= 280 && rate < 320)
+ return 6;
+
+ if (rate >= 320 && rate < 360)
+ return 7;
+
+ if (rate >= 360 && rate < 400)
+ return 8;
+
+ if (rate >= 400 && rate < 480)
+ return 9;
+
+ if (rate >= 480 && rate < 560)
+ return 10;
+
+ if (rate >= 560 && rate < 640)
+ return 11;
+
+ if (rate >= 640 && rate < 720)
+ return 12;
+
+ if (rate >= 720 && rate < 800)
+ return 13;
+
+ if (rate >= 800 && rate < 880)
+ return 14;
+
+ if (rate >= 880 && rate < 1040)
+ return 15;
+
+ if (rate >= 1040 && rate < 1200)
+ return 16;
+
+ if (rate >= 1200 && rate < 1350)
+ return 17;
+
+ if (rate >= 1350 && rate < 1500)
+ return 18;
+
+ if (rate >= 1500 && rate < 1750)
+ return 19;
+
+ if (rate >= 1750 && rate < 2000)
+ return 20;
+
+ if (rate >= 2000 && rate < 2250)
+ return 21;
+
+ if (rate >= 2250 && rate < 2500)
+ return 22;
+
All the above could be handled with a simple table and a for loop.
+ /* Unreachable. */
+ WARN(1, "Reached unreachable code.");
+ return -EINVAL;
+}
+
+static int cdns_dphy_rx_wait_for_bit(void __iomem *addr, unsigned int bit)
+{
+ u32 val;
+
+ return readl_relaxed_poll_timeout(addr, val, val & BIT(bit), 10,
+ DPHY_ISO_LANE_READY_TIMEOUT_MS * 1000);
+}
+
+static int cdns_dphy_rx_wait_lane_ready(struct cdns_dphy *dphy, int lanes)
+{
+ void __iomem *reg = dphy->regs;
+ int ret;
+
+ if (lanes < DPHY_LANES_MIN || lanes > DPHY_LANES_MAX)
+ return -EINVAL;
+
+ /* Clock lane */
+ ret = cdns_dphy_rx_wait_for_bit(reg + DPHY_ISO_CL_CTRL_L,
+ DPHY_ISO_LANE_READY_BIT);
+ if (ret)
+ return ret;
+
+ /* Data lanes. Minimum one lane is mandatory. */
+ ret = cdns_dphy_rx_wait_for_bit(reg + DPHY_ISO_DL_CTRL_L0,
+ DPHY_ISO_LANE_READY_BIT);
+ if (ret)
+ return ret;
+
+ if (lanes < 2)
+ return 0;
+
+ ret = cdns_dphy_rx_wait_for_bit(reg + DPHY_ISO_DL_CTRL_L1,
+ DPHY_ISO_LANE_READY_BIT);
+ if (ret)
+ return ret;
+
+ if (lanes < 3)
+ return 0;
+
+ ret = cdns_dphy_rx_wait_for_bit(reg + DPHY_ISO_DL_CTRL_L2,
+ DPHY_ISO_LANE_READY_BIT);
+ if (ret)
+ return ret;
+
+ if (lanes < 4)
+ return 0;
+
+ ret = cdns_dphy_rx_wait_for_bit(reg + DPHY_ISO_DL_CTRL_L3,
+ DPHY_ISO_LANE_READY_BIT);
+ if (ret)
+ return ret;
+
This, too, could be handled with an array (for the regs) and a for loop.
Tomi