Re: [PATCH v3 5/6] pinctrl: Add RTL8231 pin control and GPIO support

[Michael Walle]

Am 2021-05-28 08:42, schrieb Sander Vanheule:
> On Fri, 2021-05-28 at 08:29 +0200, Michael Walle wrote:
> > > +       gpio_cfg.reg_dat_base = GPIO_REGMAP_ADDR(RTL8231_REG_GPIO_DATA0);
> > > +       gpio_cfg.reg_set_base = GPIO_REGMAP_ADDR(RTL8231_REG_GPIO_DATA0);
> > > +       gpio_cfg.reg_dir_in_base = GPIO_REGMAP_ADDR(RTL8231_REG_GPIO_DIR0);
> >
> > Btw. you'd only need GPIO_REGMAP_ADDR(x) if x might be 0. Because you
> > have
> > a constant != 0 there, you could save the GPIO_REGMAP_ADDR() call. You
> > could drop this if you like, but no need to respin the series for 
> > this.
>
> I will need to respin this series anyway, so I can drop the 
> GPIO_REGMAP_ADDR()
> calls. I was aware they are no-ops in this case, as register address 0 
> is not
> used for the GPIO functions, so mainly included them as a form of 
> documentation.

It's up to you if you like to change it or keep it.

-michael