Re: Problem with i8042 and PS/2 keyboard on HP laptop

[Randy Dunlap]

[add linux-input mailing list]

On 5/28/21 7:02 AM, Egor Ignatov wrote:
> Hi Vojtech,
> 
> I have a problem with the PS/2 keyboard on an HP laptop
> (15s-fq2020ur).  The problem is that after booting the
> system, the keyboard does not work.  But it starts working
> about 10 seconds after pressing any key.
> 
> I looked at the i8042 log and it seems to me that the
> problem is that the driver does not wait for a response to
> the GETID. It receives ACK and immediately sends the
> 0xed command without waiting for ID.
> 
> [    0.460964] i8042: [1] f2 -> i8042 (kbd-data)
> [    0.471708] i8042: [12] fa <- i8042 (interrupt, 0, 1)
> [    0.977581] i8042: [518] ed -> i8042 (kbd-data)
> [    1.185586] i8042: [726] 60 -> i8042 (command)
> [    1.185686] i8042: [726] 64 -> i8042 (parameter)
> [    1.185842] i8042: [726] 60 -> i8042 (command)
> [    1.185935] i8042: [726] 65 -> i8042 (parameter)
> [    1.185975] i8042: [726] ab <- i8042 (interrupt, 0, 0)
> [    1.189909] i8042: [730] 83 <- i8042 (interrupt, 0, 1)
> [    1.189952] i8042: [730] f2 -> i8042 (kbd-data)
> [    1.200096] i8042: [740] fa <- i8042 (interrupt, 0, 1)
> [    1.204012] i8042: [744] fa <- i8042 (interrupt, 0, 1)
> [    1.204031] i8042: [744] 60 -> i8042 (command)
> [    1.204124] i8042: [744] 64 -> i8042 (parameter)
> [    1.204272] i8042: [744] 60 -> i8042 (command)
> [    1.204364] i8042: [744] 65 -> i8042 (parameter)
> 
> At this point it doesn't do anything until you press a key.
> Then the driver starts sending GETID repeatedly until at
> some point it gets the correct answer, after which the
> keyboard starts working. As I sad it takes about 10 secs.
> 
> Here is a part of the log after pressing a key:
> 
> [   11.103249] i8042: [10643] 1d <- i8042 (interrupt, 0, 1)
> [   11.103287] i8042: [10643] f2 -> i8042 (kbd-data)
> [   11.113673] i8042: [10654] fa <- i8042 (interrupt, 0, 1)
> [   11.113719] i8042: [10654] ab <- i8042 (interrupt, 0, 1)
> [   11.617485] i8042: [11158] ed -> i8042 (kbd-data)
> [   11.825485] i8042: [11366] 60 -> i8042 (command)
> [   11.825778] i8042: [11366] 64 -> i8042 (parameter)
> [   11.825924] i8042: [11366] 60 -> i8042 (command)
> [   11.826016] i8042: [11366] 65 -> i8042 (parameter)
> [   11.826049] i8042: [11366] 83 <- i8042 (interrupt, 0, 0)
> [   11.830084] i8042: [11370] fa <- i8042 (interrupt, 0, 1)
> [   11.830107] i8042: [11370] f2 -> i8042 (kbd-data)
> [   11.840241] i8042: [11380] fa <- i8042 (interrupt, 0, 1)
> [   11.844063] i8042: [11384] 38 <- i8042 (interrupt, 0, 1)
> [   11.844083] i8042: [11384] 60 -> i8042 (command)
> [   11.844174] i8042: [11384] 64 -> i8042 (parameter)
> [   11.844320] i8042: [11384] 60 -> i8042 (command)
> [   11.844413] i8042: [11384] 65 -> i8042 (parameter)
> [   11.849039] i8042: [11389] 3c <- i8042 (interrupt, 0, 1)
> [   11.849059] i8042: [11389] f2 -> i8042 (kbd-data)
> [   11.859198] i8042: [11399] fa <- i8042 (interrupt, 0, 1)
> [   12.361490] i8042: [11902] ed -> i8042 (kbd-data)
> ...
> [   27.516138] i8042: [27455] f2 -> i8042 (kbd-data)
> [   27.526395] i8042: [27466] fa <- i8042 (interrupt, 0, 1)
> [   27.531044] i8042: [27471] fa <- i8042 (interrupt, 0, 1)
> [   27.531080] i8042: [27471] 60 -> i8042 (command)
> [   27.531183] i8042: [27471] 64 -> i8042 (parameter)
> [   27.531336] i8042: [27471] 60 -> i8042 (command)
> [   27.531713] i8042: [27471] 65 -> i8042 (parameter)
> [   27.536215] i8042: [27476] 1d <- i8042 (interrupt, 0, 1)
> **HERE IT FINALLY RECEIVES THE CORRECT RESPONSE**
> [   27.536290] i8042: [27476] f2 -> i8042 (kbd-data)
> [   27.546882] i8042: [27487] fa <- i8042 (interrupt, 0, 1)
> [   27.546940] i8042: [27487] ab <- i8042 (interrupt, 0, 1)
> [   27.546997] i8042: [27487] 83 <- i8042 (interrupt, 0, 1)
> [   27.547018] i8042: [27487] f5 -> i8042 (kbd-data)
> [   27.557566] i8042: [27497] fa <- i8042 (interrupt, 0, 1)
> [   27.557615] i8042: [27497] ed -> i8042 (kbd-data)
> [   27.568242] i8042: [27508] fa <- i8042 (interrupt, 0, 1)
> [   27.568294] i8042: [27508] 00 -> i8042 (kbd-data)
> [   27.578730] i8042: [27518] fa <- i8042 (interrupt, 0, 1)
> [   27.578785] i8042: [27518] f3 -> i8042 (kbd-data)
> [   27.589151] i8042: [27529] fa <- i8042 (interrupt, 0, 1)
> [   27.589206] i8042: [27529] 00 -> i8042 (kbd-data)
> [   27.599602] i8042: [27539] fa <- i8042 (interrupt, 0, 1)
> [   27.599676] i8042: [27539] f4 -> i8042 (kbd-data)
> [   27.609986] i8042: [27550] fa <- i8042 (interrupt, 0, 1)
> 
> Any idea what to do about this?
> 
> Best regards,
> Egor


-- 
~Randy