[PATCH v2 02/13] leds: el15203000: Give better margin for usleep_range()

[Andy Shevchenko]

1 microsecond with 20 millisecond parameter is too low margin for
usleep_range(). Give 100 to make scheduler been less tortured.

While at it, fix indentation in cases where EL_FW_DELAY_USEC is in use.
In the loop, move it to the end to avoid a conditional.

Signed-off-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
---
v2: amended the commit message
 drivers/leds/leds-el15203000.c | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/drivers/leds/leds-el15203000.c b/drivers/leds/leds-el15203000.c
index 76b455e87574..77e76f775385 100644
--- a/drivers/leds/leds-el15203000.c
+++ b/drivers/leds/leds-el15203000.c
@@ -97,27 +97,22 @@ static int el15203000_cmd(struct el15203000_led *led, u8 brightness)
 
 	/* to avoid SPI mistiming with firmware we should wait some time */
 	if (time_after(led->priv->delay, jiffies)) {
-		dev_dbg(led->priv->dev, "Wait %luus to sync",
-			EL_FW_DELAY_USEC);
+		dev_dbg(led->priv->dev, "Wait %luus to sync", EL_FW_DELAY_USEC);
 
-		usleep_range(EL_FW_DELAY_USEC,
-			     EL_FW_DELAY_USEC + 1);
+		usleep_range(EL_FW_DELAY_USEC, EL_FW_DELAY_USEC + 100);
 	}
 
 	cmd[0] = led->reg;
 	cmd[1] = brightness;
 
 	for (i = 0; i < ARRAY_SIZE(cmd); i++) {
-		if (i)
-			usleep_range(EL_FW_DELAY_USEC,
-				     EL_FW_DELAY_USEC + 1);
-
 		ret = spi_write(led->priv->spi, &cmd[i], sizeof(cmd[i]));
 		if (ret) {
 			dev_err(led->priv->dev,
 				"spi_write() error %d", ret);
 			break;
 		}
+		usleep_range(EL_FW_DELAY_USEC, EL_FW_DELAY_USEC + 100);
 	}
 
 	led->priv->delay = jiffies + usecs_to_jiffies(EL_FW_DELAY_USEC);
@@ -306,8 +301,7 @@ static int el15203000_probe(struct spi_device *spi)
 	priv->count	= count;
 	priv->dev	= &spi->dev;
 	priv->spi	= spi;
-	priv->delay	= jiffies -
-			  usecs_to_jiffies(EL_FW_DELAY_USEC);
+	priv->delay	= jiffies - usecs_to_jiffies(EL_FW_DELAY_USEC);
 
 	spi_set_drvdata(spi, priv);
 
-- 
2.31.1