[PATCH 4.4 15/54] serial: rp2: use request_firmware instead of request_firmware_nowait

From: Greg Kroah-Hartman
Date: Mon May 31 2021 - 09:22:15 EST

Next message: Greg Kroah-Hartman: "[PATCH 4.4 06/54] mac80211: assure all fragments are encrypted"
Previous message: Greg Kroah-Hartman: "[PATCH 4.4 14/54] USB: trancevibrator: fix control-request direction"
In reply to: Greg Kroah-Hartman: "[PATCH 4.4 14/54] USB: trancevibrator: fix control-request direction"
Next in thread: Greg Kroah-Hartman: "[PATCH 4.4 06/54] mac80211: assure all fragments are encrypted"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

From: Zheyu Ma <zheyuma97@xxxxxxxxx>

commit 016002848c82eeb5d460489ce392d91fe18c475c upstream.

In 'rp2_probe', the driver registers 'rp2_uart_interrupt' then calls
'rp2_fw_cb' through 'request_firmware_nowait'. In 'rp2_fw_cb', if the
firmware don't exists, function just return without initializing ports
of 'rp2_card'. But now the interrupt handler function has been
registered, and when an interrupt comes, 'rp2_uart_interrupt' may access
those ports then causing NULL pointer dereference or other bugs.

Because the driver does some initialization work in 'rp2_fw_cb', in
order to make the driver ready to handle interrupts, 'request_firmware'
should be used instead of asynchronous 'request_firmware_nowait'.

This report reveals it:

INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-
gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xec/0x156 lib/dump_stack.c:118
assign_lock_key kernel/locking/lockdep.c:727 [inline]
register_lock_class+0x14e5/0x1ba0 kernel/locking/lockdep.c:753
__lock_acquire+0x187/0x3750 kernel/locking/lockdep.c:3303
lock_acquire+0x124/0x340 kernel/locking/lockdep.c:3907
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x32/0x50 kernel/locking/spinlock.c:144
spin_lock include/linux/spinlock.h:329 [inline]
rp2_ch_interrupt drivers/tty/serial/rp2.c:466 [inline]
rp2_asic_interrupt.isra.9+0x15d/0x990 drivers/tty/serial/rp2.c:493
rp2_uart_interrupt+0x49/0xe0 drivers/tty/serial/rp2.c:504
__handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149
handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189
handle_irq_event+0xac/0x140 kernel/irq/handle.c:206
handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725
generic_handle_irq_desc include/linux/irqdesc.h:155 [inline]
handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87
do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247
common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670
</IRQ>
RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61
Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 c2 2f 8c 48 89 e5 e8 fb 31 e7 f8
8b 05 75 af 8d 03 85 c0 7e 07 0f 00 2d 8a 61 65 00 fb f4 <5d> c3 90 90 90
90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41
RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde
RAX: 0000000000000000 RBX: ffffffff8bde7e48 RCX: ffffffff88a21285
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2fc200
RBP: ffff88806b71fcc8 R08: fffffbfff185f840 R09: fffffbfff185f840
R10: 0000000000000001 R11: fffffbfff185f840 R12: 0000000000000002
R13: ffffffff8bea18a0 R14: 0000000000000000 R15: 0000000000000000
arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline]
default_idle+0x6f/0x360 arch/x86/kernel/process.c:557
arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548
default_idle_call+0x3b/0x60 kernel/sched/idle.c:93
cpuidle_idle_call kernel/sched/idle.c:153 [inline]
do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263
cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369
start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271
secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243
BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
PGD 8000000056d27067 P4D 8000000056d27067 PUD 56d28067 PMD 0
Oops: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-
gc9ba5276e321-prebuilt.qemu.org 04/01/2014
RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline]
RIP: 0010:rp2_ch_interrupt drivers/tty/serial/rp2.c:472 [inline]
RIP: 0010:rp2_asic_interrupt.isra.9+0x181/0x990 drivers/tty/serial/rp2.c:
493
Code: df e8 43 5d c2 05 48 8d 83 e8 01 00 00 48 89 85 60 ff ff ff 48 c1 e8
03 42 80 3c 30 00 0f 85 aa 07 00 00 48 8b 83 e8 01 00 00 <8b> 40 10 89 c1
89 85 68 ff ff ff 48 8b 83 e8 01 00 00 89 48 10 83
RSP: 0018:ffff88806c287cd0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff88806ade6820 RCX: ffffffff814300b1
RDX: 1ffff1100d5bcd06 RSI: 0000000000000004 RDI: ffff88806ade6820
RBP: ffff88806c287db8 R08: ffffed100d5bcd05 R09: ffffed100d5bcd05
R10: 0000000000000001 R11: ffffed100d5bcd04 R12: ffffc90001e00000
R13: ffff888069654e10 R14: dffffc0000000000 R15: ffff888069654df0
FS: 0000000000000000(0000) GS:ffff88806c280000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000006892c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
rp2_uart_interrupt+0x49/0xe0 drivers/tty/serial/rp2.c:504
__handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149
handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189
handle_irq_event+0xac/0x140 kernel/irq/handle.c:206
handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725
generic_handle_irq_desc include/linux/irqdesc.h:155 [inline]
handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87
do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247
common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670
</IRQ>
RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61
Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 c2 2f 8c 48 89 e5 e8 fb 31 e7
f8 8b 05 75 af 8d 03 85 c0 7e 07 0f 00 2d 8a 61 65 00 fb f4 <5d> c3 90
90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41
RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde
RAX: 0000000000000000 RBX: ffffffff8bde7e48 RCX: ffffffff88a21285
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2fc200
RBP: ffff88806b71fcc8 R08: fffffbfff185f840 R09: fffffbfff185f840
R10: 0000000000000001 R11: fffffbfff185f840 R12: 0000000000000002
R13: ffffffff8bea18a0 R14: 0000000000000000 R15: 0000000000000000
arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline]
default_idle+0x6f/0x360 arch/x86/kernel/process.c:557
arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548
default_idle_call+0x3b/0x60 kernel/sched/idle.c:93
cpuidle_idle_call kernel/sched/idle.c:153 [inline]
do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263
cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369
start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271
secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243
Modules linked in:
Dumping ftrace buffer:
(ftrace buffer empty)
CR2: 0000000000000010
---[ end trace 11804dbb55cb1a64 ]---
RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline]
RIP: 0010:rp2_ch_interrupt drivers/tty/serial/rp2.c:472 [inline]
RIP: 0010:rp2_asic_interrupt.isra.9+0x181/0x990 drivers/tty/serial/rp2.c:
493
Code: df e8 43 5d c2 05 48 8d 83 e8 01 00 00 48 89 85 60 ff ff ff 48 c1
e8 03 42 80 3c 30 00 0f 85 aa 07 00 00 48 8b 83 e8 01 00 00 <8b> 40 10 89
c1 89 85 68 ff ff ff 48 8b 83 e8 01 00 00 89 48 10 83
RSP: 0018:ffff88806c287cd0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff88806ade6820 RCX: ffffffff814300b1
RDX: 1ffff1100d5bcd06 RSI: 0000000000000004 RDI: ffff88806ade6820
RBP: ffff88806c287db8 R08: ffffed100d5bcd05 R09: ffffed100d5bcd05
R10: 0000000000000001 R11: ffffed100d5bcd04 R12: ffffc90001e00000
R13: ffff888069654e10 R14: dffffc0000000000 R15: ffff888069654df0
FS: 0000000000000000(0000) GS:ffff88806c280000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000006892c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Reported-by: Zheyu Ma <zheyuma97@xxxxxxxxx>
Signed-off-by: Zheyu Ma <zheyuma97@xxxxxxxxx>
Link: https://lore.kernel.org/r/1621577323-1541-1-git-send-email-zheyuma97@xxxxxxxxx
Cc: stable <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/tty/serial/rp2.c | 52 +++++++++++++++--------------------------------
1 file changed, 17 insertions(+), 35 deletions(-)

--- a/drivers/tty/serial/rp2.c
+++ b/drivers/tty/serial/rp2.c
@@ -198,7 +198,6 @@ struct rp2_card {
void __iomem *bar0;
void __iomem *bar1;
spinlock_t card_lock;
- struct completion fw_loaded;
};

#define RP_ID(prod) PCI_VDEVICE(RP, (prod))
@@ -667,17 +666,10 @@ static void rp2_remove_ports(struct rp2_
card->initialized_ports = 0;
}

-static void rp2_fw_cb(const struct firmware *fw, void *context)
+static int rp2_load_firmware(struct rp2_card *card, const struct firmware *fw)
{
- struct rp2_card *card = context;
resource_size_t phys_base;
- int i, rc = -ENOENT;
-
- if (!fw) {
- dev_err(&card->pdev->dev, "cannot find '%s' firmware image\n",
- RP2_FW_NAME);
- goto no_fw;
- }
+ int i, rc = 0;

phys_base = pci_resource_start(card->pdev, 1);

@@ -723,23 +715,13 @@ static void rp2_fw_cb(const struct firmw
card->initialized_ports++;
}

- release_firmware(fw);
-no_fw:
- /*
- * rp2_fw_cb() is called from a workqueue long after rp2_probe()
- * has already returned success. So if something failed here,
- * we'll just leave the now-dormant device in place until somebody
- * unbinds it.
- */
- if (rc)
- dev_warn(&card->pdev->dev, "driver initialization failed\n");
-
- complete(&card->fw_loaded);
+ return rc;
}

static int rp2_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
+ const struct firmware *fw;
struct rp2_card *card;
struct rp2_uart_port *ports;
void __iomem * const *bars;
@@ -750,7 +732,6 @@ static int rp2_probe(struct pci_dev *pde
return -ENOMEM;
pci_set_drvdata(pdev, card);
spin_lock_init(&card->card_lock);
- init_completion(&card->fw_loaded);

rc = pcim_enable_device(pdev);
if (rc)
@@ -783,21 +764,23 @@ static int rp2_probe(struct pci_dev *pde
return -ENOMEM;
card->ports = ports;

- rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt,
- IRQF_SHARED, DRV_NAME, card);
- if (rc)
+ rc = request_firmware(&fw, RP2_FW_NAME, &pdev->dev);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "cannot find '%s' firmware image\n",
+ RP2_FW_NAME);
return rc;
+ }

- /*
- * Only catastrophic errors (e.g. ENOMEM) are reported here.
- * If the FW image is missing, we'll find out in rp2_fw_cb()
- * and print an error message.
- */
- rc = request_firmware_nowait(THIS_MODULE, 1, RP2_FW_NAME, &pdev->dev,
- GFP_KERNEL, card, rp2_fw_cb);
+ rc = rp2_load_firmware(card, fw);
+
+ release_firmware(fw);
+ if (rc < 0)
+ return rc;
+
+ rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt,
+ IRQF_SHARED, DRV_NAME, card);
if (rc)
return rc;
- dev_dbg(&pdev->dev, "waiting for firmware blob...\n");

return 0;
}
@@ -806,7 +789,6 @@ static void rp2_remove(struct pci_dev *p
{
struct rp2_card *card = pci_get_drvdata(pdev);

- wait_for_completion(&card->fw_loaded);
rp2_remove_ports(card);
}

Next message: Greg Kroah-Hartman: "[PATCH 4.4 06/54] mac80211: assure all fragments are encrypted"
Previous message: Greg Kroah-Hartman: "[PATCH 4.4 14/54] USB: trancevibrator: fix control-request direction"
In reply to: Greg Kroah-Hartman: "[PATCH 4.4 14/54] USB: trancevibrator: fix control-request direction"
Next in thread: Greg Kroah-Hartman: "[PATCH 4.4 06/54] mac80211: assure all fragments are encrypted"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]