[PATCH 4.19 038/116] usb: gadget: udc: renesas_usb3: Fix a race in usb3_start_pipen()

[Greg Kroah-Hartman]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>

commit e752dbc59e1241b13b8c4f7b6eb582862e7668fe upstream.

The usb3_start_pipen() is called by renesas_usb3_ep_queue() and
usb3_request_done_pipen() so that usb3_start_pipen() is possible
to cause a race when getting usb3_first_req like below:

renesas_usb3_ep_queue()
 spin_lock_irqsave()
 list_add_tail()
 spin_unlock_irqrestore()
 usb3_start_pipen()
  usb3_first_req = usb3_get_request() --- [1]
 --- interrupt ---
 usb3_irq_dma_int()
 usb3_request_done_pipen()
  usb3_get_request()
  usb3_start_pipen()
  usb3_first_req = usb3_get_request()
  ...
  (the req is possible to be finished in the interrupt)

The usb3_first_req [1] above may have been finished after the interrupt
ended so that this driver caused to start a transfer wrongly. To fix this
issue, getting/checking the usb3_first_req are under spin_lock_irqsave()
in the same section.

Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller")
Cc: stable <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
Link: https://lore.kernel.org/r/20210524060155.1178724-1-yoshihiro.shimoda.uh@xxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/usb/gadget/udc/renesas_usb3.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -1466,7 +1466,7 @@ static void usb3_start_pipen(struct rene
 			     struct renesas_usb3_request *usb3_req)
 {
 	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
-	struct renesas_usb3_request *usb3_req_first = usb3_get_request(usb3_ep);
+	struct renesas_usb3_request *usb3_req_first;
 	unsigned long flags;
 	int ret = -EAGAIN;
 	u32 enable_bits = 0;
@@ -1474,7 +1474,8 @@ static void usb3_start_pipen(struct rene
 	spin_lock_irqsave(&usb3->lock, flags);
 	if (usb3_ep->halt || usb3_ep->started)
 		goto out;
-	if (usb3_req != usb3_req_first)
+	usb3_req_first = __usb3_get_request(usb3_ep);
+	if (!usb3_req_first || usb3_req != usb3_req_first)
 		goto out;
 
 	if (usb3_pn_change(usb3, usb3_ep->num) < 0)