Re: [PATCH 1/5] dt-bindings: media: imx8q: add imx video codec bindings

[Nicolas Dufresne]

Le lundi 31 mai 2021 à 10:51 +0800, Ming Qian a écrit :
> Add devicetree binding documentation for IMX8Q Video Processing Unit IP
> 
> Signed-off-by: Ming Qian <ming.qian@xxxxxxx>
> Signed-off-by: Shijie Qin <shijie.qin@xxxxxxx>
> Signed-off-by: Zhou Peng <eagle.zhou@xxxxxxx>
> ---
>  .../bindings/media/nxp,imx8q-vpu.yaml         | 201 ++++++++++++++++++
>  1 file changed, 201 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8q-vpu.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx8q-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx8q-vpu.yaml
> new file mode 100644
> index 000000000000..97e428dbfdbe
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/nxp,imx8q-vpu.yaml
> @@ -0,0 +1,201 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/nxp,imx8q-vpu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP i.MX8Q video encode and decode accelerators
> +
> +maintainers:
> +  - ming_qian <ming.qian@xxxxxxx>
> +  - Shijie Qin <shijie.qin@xxxxxxx>
> +
> +description: |-
> +  The Amphion MXC video encode and decode accelerators present on NXP i.MX8Q SoCs.

Hi, thanks for this work. Do you think it would be possible to give a version
for the Amphion design that is in used ? This is for the posterity and/or if
some non-NXP vendor needs to use this driver because it picked the same design.
Though form what I understood, Allegro acquired it, and might not be continuing
that model, it remains that is nicer if we document as much as we can, to give
maximum relevance to you rcontribution.

> +
> +allOf:
> +  - $ref: /schemas/simple-bus.yaml#
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +        - nxp,imx8qxp-vpu
> +        - nxp,imx8qm-vpu
> +
> +  reg:
> +    maxItems: 1
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  memory-region:
> +    description:
> +      Phandle to a node describing reserved memory used by VPU.
> +      (see bindings/reserved-memory/reserved-memory.txt)
> +
> +  vpu_lpcg:
> +    description:
> +      This is vpu Low-Power Clock Gate (LPCG) module.
> +
> +  mu_m0:
> +    description:
> +      Each vpu core correspond a MU node, which used for communication between
> +      driver and firmware. Implement via mailbox on driver.
> +
> +    vpu_core:
> +      type: object
> +      additionalProperties: false
> +      description:
> +        Each core correspond a decoder or encoder, need to configure them
> +        separately.
> +
> +      properties:
> +        compatible:
> +          oneOf:
> +            - const: nxp,imx8q-vpu-decoder
> +            - const: nxp,imx8q-vpu-encoder
> +
> +        reg:
> +          maxItems: 1
> +
> +        power-domains:
> +          maxItems: 1
> +
> +        mbox-names:
> +            - const: tx0
> +            - const: tx1
> +            - const: rx
> +
> +        mboxes:
> +          maxItems: 3
> +          description:
> +            List of phandle of 2 MU channels for tx, 1 MU channel for rx.
> +
> +        boot-region:
> +          description:
> +            Phandle to a node describing reserved memory used by firmware
> +            loading.
> +
> +        rpc-region:
> +          description:
> +            Phandle to a node describing reserved memory used by RPC shared
> +            memory between firmware and driver.
> +
> +        print-offset:
> +          description:
> +            The memory offset from RPC address, used by reserve firmware log.
> +
> +        id:
> +          description: Index of vpu core.
> +
> +      required:
> +      - compatible
> +      - reg
> +      - power-domains
> +      - mbox-names
> +      - mboxes
> +      - boot-region
> +      - rpc-region
> +      - print-offset
> +      - id
> +
> +
> +required:
> +  - compatible
> +  - reg
> +  - power-domains
> +  - memory-region
> +  - vpu_lpcg
> +  - mu_m0
> +  - vpu_core
> +
> +examples:
> +  # Device node example for i.MX8QM platform:
> +  - |
> +    #include <dt-bindings/firmware/imx/rsrc.h>
> +
> +    vpu: vpu-bus@2c000000 {
> +      compatible = "nxp,imx8qm-vpu", "simple-bus";
> +      ranges = <0x2c000000 0x2c000000 0x2000000>;
> +      reg = <0x2c000000 0x1000000>;
> +      #address-cells = <1>;
> +      #size-cells = <1>;
> +      power-domains = <&pd IMX_SC_R_VPU>;
> +      memory-region = <&vpu_reserved>;
> +
> +      vpu_lpcg: clock-controller@2c000000 {
> +        compatible = "fsl,imx8qxp-lpcg-vpu";
> +        reg = <0x2c000000 0x2000000>;
> +        #clock-cells = <1>;
> +        status = "disabled";
> +      };
> +
> +      mu_m0: mailbox@2d000000 {
> +        compatible = "fsl,imx6sx-mu";
> +        reg = <0x2d000000 0x20000>;
> +        interrupts = <0 472 4>;
> +        #mbox-cells = <2>;
> +        power-domains = <&pd IMX_SC_R_VPU_MU_0>;
> +      };
> +
> +      mu1_m0: mailbox@2d020000 {
> +        compatible = "fsl,imx6sx-mu";
> +        reg = <0x2d020000 0x20000>;
> +        interrupts = <0 473 4>;
> +        #mbox-cells = <2>;
> +        power-domains = <&pd IMX_SC_R_VPU_MU_1>;
> +      };
> +
> +      mu2_m0: mailbox@2d040000 {
> +        compatible = "fsl,imx6sx-mu";
> +        reg = <0x2d040000 0x20000>;
> +        interrupts = <0 474 4>;
> +        #mbox-cells = <2>;
> +        power-domains = <&pd IMX_SC_R_VPU_MU_2>;
> +      };
> +
> +      vpu_core0: vpu_decoder@2d080000 {
> +        compatible = "nxp,imx8q-vpu-decoder";
> +        reg = <0x2d080000 0x10000>;
> +        power-domains = <&pd IMX_SC_R_VPU_DEC_0>;
> +        mbox-names = "tx0", "tx1", "rx";
> +        mboxes = <&mu_m0 0 0
> +                  &mu_m0 0 1
> +                  &mu_m0 1 0>;
> +        boot-region = <&decoder_boot>;
> +        rpc-region = <&decoder_rpc>;
> +        print-offset = <0x180000>;
> +        id = <0>;
> +      };
> +
> +      vpu_core1: vpu_encoder@2d090000 {
> +        compatible = "nxp,imx8q-vpu-encoder";
> +        reg = <0x2d090000 0x10000>;
> +        power-domains = <&pd IMX_SC_R_VPU_ENC_0>;
> +        mbox-names = "tx0", "tx1", "rx";
> +        mboxes = <&mu1_m0 0 0
> +                  &mu1_m0 0 1
> +                  &mu1_m0 1 0>;
> +        boot-region = <&encoder1_boot>;
> +        rpc-region = <&encoder1_rpc>;
> +        print-offset = <0x80000>;
> +        id = <1>;
> +      };
> +
> +      vpu_core2: vpu_encoder@2d0a0000 {
> +        reg = <0x2d0a0000 0x10000>;
> +        compatible = "nxp,imx8q-vpu-encoder";
> +        power-domains = <&pd IMX_SC_R_VPU_ENC_1>;
> +        mbox-names = "tx0", "tx1", "rx";
> +        mboxes = <&mu2_m0 0 0
> +                  &mu2_m0 0 1
> +                  &mu2_m0 1 0>;
> +        boot-region = <&encoder2_boot>;
> +        rpc-region = <&encoder2_rpc>;
> +        id = <2>;
> +      };
> +    };
> +
> +...