[PATCH] usb: typec: tcpm: Properly handle Alert and Status Messages

From: Kyle Tso
Date: Mon May 31 2021 - 13:37:18 EST


When receiving Alert Message, if it is not unexpected but is
unsupported for some reason, the port should return Not_Supported
Message response.

Also, according to PD3.0 Spec 6.5.2.1.4 Event Flags Field, the
OTP/OVP/OCP flags in the Event Flags field in Status Message no longer
require Get_PPS_Status Message to clear them. Thus remove it when
receiving Status Message with those flags being set.

In addition, add the missing AMS operations for Status Message.

Fixes: 64f7c494a3c0 ("typec: tcpm: Add support for sink PPS related messages")
Fixes: 0908c5aca31e ("usb: typec: tcpm: AMS and Collision Avoidance")
Signed-off-by: Kyle Tso <kyletso@xxxxxxxxxx>
---
drivers/usb/typec/tcpm/tcpm.c | 52 ++++++++++++++++++----------------
include/linux/usb/pd_ext_sdb.h | 4 ---
2 files changed, 27 insertions(+), 29 deletions(-)

diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index 0db685d5d9c0..3101753b3182 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -2211,20 +2211,25 @@ static void tcpm_handle_alert(struct tcpm_port *port, const __le32 *payload,

if (!type) {
tcpm_log(port, "Alert message received with no type");
+ tcpm_queue_message(port, PD_MSG_CTRL_NOT_SUPP);
return;
}

/* Just handling non-battery alerts for now */
if (!(type & USB_PD_ADO_TYPE_BATT_STATUS_CHANGE)) {
- switch (port->state) {
- case SRC_READY:
- case SNK_READY:
+ if (port->pwr_role == TYPEC_SOURCE) {
+ port->upcoming_state = GET_STATUS_SEND;
+ tcpm_ams_start(port, GETTING_SOURCE_SINK_STATUS);
+ } else {
+ /*
+ * Do not check SinkTxOk here in case the Source doesn't set its Rp to
+ * SinkTxOk in time.
+ */
+ port->ams = GETTING_SOURCE_SINK_STATUS;
tcpm_set_state(port, GET_STATUS_SEND, 0);
- break;
- default:
- tcpm_queue_message(port, PD_MSG_CTRL_WAIT);
- break;
}
+ } else {
+ tcpm_queue_message(port, PD_MSG_CTRL_NOT_SUPP);
}
}

@@ -2468,7 +2473,12 @@ static void tcpm_pd_data_request(struct tcpm_port *port,
tcpm_pd_handle_state(port, BIST_RX, BIST, 0);
break;
case PD_DATA_ALERT:
- tcpm_handle_alert(port, msg->payload, cnt);
+ if (port->state != SRC_READY && port->state != SNK_READY)
+ tcpm_pd_handle_state(port, port->pwr_role == TYPEC_SOURCE ?
+ SRC_SOFT_RESET_WAIT_SNK_TX : SNK_SOFT_RESET,
+ NONE_AMS, 0);
+ else
+ tcpm_handle_alert(port, msg->payload, cnt);
break;
case PD_DATA_BATT_STATUS:
case PD_DATA_GET_COUNTRY_INFO:
@@ -2792,24 +2802,16 @@ static void tcpm_pd_ext_msg_request(struct tcpm_port *port,

switch (type) {
case PD_EXT_STATUS:
- /*
- * If PPS related events raised then get PPS status to clear
- * (see USB PD 3.0 Spec, 6.5.2.4)
- */
- if (msg->ext_msg.data[USB_PD_EXT_SDB_EVENT_FLAGS] &
- USB_PD_EXT_SDB_PPS_EVENTS)
- tcpm_pd_handle_state(port, GET_PPS_STATUS_SEND,
- GETTING_SOURCE_SINK_STATUS, 0);
-
- else
- tcpm_pd_handle_state(port, ready_state(port), NONE_AMS, 0);
- break;
case PD_EXT_PPS_STATUS:
- /*
- * For now the PPS status message is used to clear events
- * and nothing more.
- */
- tcpm_pd_handle_state(port, ready_state(port), NONE_AMS, 0);
+ if (port->ams == GETTING_SOURCE_SINK_STATUS) {
+ tcpm_ams_finish(port);
+ tcpm_set_state(port, ready_state(port), 0);
+ } else {
+ /* unexpected Status or PPS_Status Message */
+ tcpm_pd_handle_state(port, port->pwr_role == TYPEC_SOURCE ?
+ SRC_SOFT_RESET_WAIT_SNK_TX : SNK_SOFT_RESET,
+ NONE_AMS, 0);
+ }
break;
case PD_EXT_SOURCE_CAP_EXT:
case PD_EXT_GET_BATT_CAP:
diff --git a/include/linux/usb/pd_ext_sdb.h b/include/linux/usb/pd_ext_sdb.h
index 0eb83ce19597..b517ebc8f0ff 100644
--- a/include/linux/usb/pd_ext_sdb.h
+++ b/include/linux/usb/pd_ext_sdb.h
@@ -24,8 +24,4 @@ enum usb_pd_ext_sdb_fields {
#define USB_PD_EXT_SDB_EVENT_OVP BIT(3)
#define USB_PD_EXT_SDB_EVENT_CF_CV_MODE BIT(4)

-#define USB_PD_EXT_SDB_PPS_EVENTS (USB_PD_EXT_SDB_EVENT_OCP | \
- USB_PD_EXT_SDB_EVENT_OTP | \
- USB_PD_EXT_SDB_EVENT_OVP)
-
#endif /* __LINUX_USB_PD_EXT_SDB_H */
--
2.32.0.rc0.204.g9fa02ecfa5-goog