Re: [PATCH v2 3/4] dt-bindings: mfd: Add Delta TN48M CPLD drivers bindings

[Robert Marko]

On Tue, Jun 1, 2021 at 11:31 AM Lee Jones <lee.jones@xxxxxxxxxx> wrote:
>
> On Tue, 01 Jun 2021, Robert Marko wrote:
>
> > On Tue, Jun 1, 2021 at 10:22 AM Lee Jones <lee.jones@xxxxxxxxxx> wrote:
> > >
> > > On Tue, 01 Jun 2021, Lee Jones wrote:
> > >
> > > > On Mon, 31 May 2021, Robert Marko wrote:
> > > >
> > > > > On Wed, May 26, 2021 at 9:52 AM Lee Jones <lee.jones@xxxxxxxxxx> wrote:
> > > > > >
> > > > > > On Tue, 25 May 2021, Robert Marko wrote:
> > > > > >
> > > > > > > On Tue, May 25, 2021 at 9:46 AM Lee Jones <lee.jones@xxxxxxxxxx> wrote:
> > > > > > > >
> > > > > > > > On Mon, 24 May 2021, Rob Herring wrote:
> > > > > > > >
> > > > > > > > > On Mon, May 24, 2021 at 02:05:38PM +0200, Robert Marko wrote:
> > > > > > > > > > Add binding documents for the Delta TN48M CPLD drivers.
> > > > > > > > > >
> > > > > > > > > > Signed-off-by: Robert Marko <robert.marko@xxxxxxxxxx>
> > > > > > > > > > ---
> > > > > > > > > > Changes in v2:
> > > > > > > > > > * Implement MFD as a simple I2C MFD
> > > > > > > > > > * Add GPIO bindings as separate
> > > > > > > > >
> > > > > > > > > I don't understand why this changed. This doesn't look like an MFD to
> > > > > > > > > me. Make your binding complete if there are missing functions.
> > > > > > > > > Otherwise, stick with what I already ok'ed.
> > > > > > > >
> > > > > > > > Right.  What else, besides GPIO, does this do?
> > > > > > >
> > > > > > > It currently does not do anything else as hwmon driver was essentially
> > > > > > > NACK-ed for not exposing standard attributes.
> > > > > >
> > > > > > Once this provides more than GPIO capabilities i.e. becomes a proper
> > > > > > Multi-Function Device, then it can use the MFD framework.  Until then,
> > > > > > it's a GPIO device I'm afraid.
> > > > > >
> > > > > > Are you going to re-author the HWMON driver to conform?
> > > > > hwmon cannot be reathored as it has no standard hwmon attributes.
> > > > >
> > > > > >
> > > > > > > The CPLD itself has PSU status-related information, bootstrap related
> > > > > > > information,
> > > > > > > various resets for the CPU-s, OOB ethernet PHY, information on the exact board
> > > > > > > model it's running etc.
> > > > > > >
> > > > > > > PSU and model-related info stuff is gonna be exposed via a misc driver
> > > > > > > in debugfs as
> > > > > > > we have user-space SW depending on that.
> > > > > > > I thought we agreed on that as v1 MFD driver was exposing those directly and
> > > > > > > not doing anything else.
> > > > > >
> > > > > > Yes, we agreed that creating an MFD driver just to expose chip
> > > > > > attributes was not an acceptable solution.
> > > > > >
> > > > > > > So I moved to use the simple I2C MFD driver, this is all modeled on the sl28cpld
> > > > > > > which currently uses the same driver and then GPIO regmap as I do.
> > > > > > >
> > > > > > > Other stuff like the resets is probably gonna get exposed later when
> > > > > > > it's required
> > > > > > > to control it directly.
> > > > > >
> > > > > > In order for this driver to tick the MFD box, it's going to need more
> > > > > > than one function.
> > > > >
> > > > > Understood, would a debug driver count or I can expose the resets via
> > > > > a reset driver
> > > > > as we have a future use for them?
> > > >
> > > > CPLDs and FPGAs are funny ones and are often difficult to support in
> > > > Linux.  Especially if they can change their behaviour.
> > > >
> > > > It's hard to make a solid suggestion as to how your device is handled
> > > > without knowing the intricacies of the device.
> > > >
> > > > Why do you require one single Regmap anyway?  Are they register banks
> > > > not neatly separated on a per-function basis?
> > >
> > > Also, if this is really just a GPIO expander, can't the GPIO driver
> > > output something to /sysfs that identifies it to userspace instead?
> >
> > I replied to your previous reply instead of this one directly.
> > It's not just a GPIO expander, it also provides resets to all of the HW
> > and a lot of debugging information.
> > Note that other switches use the same CPLD but with more features
> > so I want to just extend these drivers and add for example hwmon.
> >
> > It's not just about it identifying itself, it offers a lot of various
> > debug info,
> > quite literally down to what CPU has access to the serial console on the
> > front and their bootstrap pins.
> >
> > So, I want to expose the CPLD version, code version, switch model,
> > PSU status pins and a lot more using a separate driver as they
> > don't really belong to any other subsystem than misc using debugfs.
>
> drivers/soc is also an option for devices like these.

I have completely forgotten about that, it's a potential place.

Regards,
Robert
>
> --
> Lee Jones [李琼斯]
> Senior Technical Lead - Developer Services
> Linaro.org │ Open source software for Arm SoCs
> Follow Linaro: Facebook | Twitter | Blog



-- 
Robert Marko
Staff Embedded Linux Engineer
Sartura Ltd.
Lendavska ulica 16a
10000 Zagreb, Croatia
Email: robert.marko@xxxxxxxxxx
Web: www.sartura.hr