Re: [PATCH] perf probe: Provide more detail with relocation warning

[Arnaldo Carvalho de Melo]

Em Wed, May 26, 2021 at 11:20:20PM +0900, Masami Hiramatsu escreveu:
> On Wed, 26 May 2021 09:56:29 -0300
> Arnaldo Carvalho de Melo <acme@xxxxxxxxxx> wrote:
> 
> > Em Wed, May 26, 2021 at 03:33:40PM +0900, Masami Hiramatsu escreveu:
> > > On Wed, 26 May 2021 10:23:18 +0530 Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx> wrote:
> > > > On 5/25/21 6:18 PM, Masami Hiramatsu wrote:
> > > > > On Tue, 25 May 2021 10:07:44 +0530 Ravi Bangoria <ravi.bangoria@xxxxxxxxxxxxx> wrote:
> > 
> > > > >> When run as normal user with default sysctl kernel.kptr_restrict=0
> > > > >> and kernel.perf_event_paranoid=2, perf probe fails with:
> > 
> > > > >>    $ ./perf probe move_page_tables
> > > > >>    Relocated base symbol is not found!
> > 
> > > > >> The warning message is not much informative. The reason perf
> > > > >> fails is because /proc/kallsyms is restricted by
> > > > >> perf_event_paranoid=2 for normal user and thus perf fails to read
> > > > >> relocated address of the base symbol.
> > 
> > > > >> Tweaking kptr_restrict and perf_event_paranoid can change the
> > > > >> behavior of perf probe. Also, running as root or privileged user
> > > > >> works too. Add these details in the warning message.
> > 
> > > > >> Plus, kmap->ref_reloc_sym might not be always set even if
> > > > >> host_machine is initialized. Above is the example of the same.
> > > > >> Remove that comment.
> > 
> > > > > Yes, those are restricted in some cases. Anyway without priviledged
> > > > > (super) user, perf probe can not set the probe in ftrace.
> > 
> > > > > Hmm, I think it should check the effective user-id at first. If it
> > > > > is not super user and the action will access tracefs and kallsyms,
> > > > > it should warn at that point.
> > 
> > > > If kptr_restrict=2, perf probe fails with same error even for root user.
> > > > That's why I thought to just change this warning message.
> > 
> > > Ah, yes. In that case, perf probe must not use the base symbol.
> > > (like -D option)
> > > OK, then, let's merge this fix.
> > 
> > > Acked-by: Masami Hiramatsu <mhiramat@xxxxxxxxxx>
> > 
> > Thanks, applied as it improves the current situation.
> > 
> > But as a follow up, to further improve this, we can reuse what 'perf trace' has:
> > 
> >   $ perf trace sleep 1
> >   Error:	No permissions to read /sys/kernel/tracing/events/raw_syscalls/sys_(enter|exit)
> >   Hint:	Try 'sudo mount -o remount,mode=755 /sys/kernel/tracing/'
> >   $ sudo mount -o remount,mode=755 /sys/kernel/tracing/
> >   $ perf trace sleep 1
> >   Error:	Permission denied.
> >   Hint:	Check /proc/sys/kernel/perf_event_paranoid setting.
> >   Hint:	For your workloads it needs to be <= 1
> >   Hint:	For system wide tracing it needs to be set to -1.
> >   Hint:	Try: 'sudo sh -c "echo -1 > /proc/sys/kernel/perf_event_paranoid"'
> >   Hint:	The current value is 2.
> >   $ 
> 
> OK, let me check this.
> BTW, does perf_event_paranoid affect only perf syscall (and kallsyms),
> not the tracefs correct?
> 
> > I.e. go the extra step and show what the current value is and what it
> > needs to be to achieve what is being attempted.
> > 
> > IOW combine error message with relevant documentation, to save steps.
> > 
> > See what 'perf top' does for an unpriv user:
> > 
> >   $ perf top --stdio
> >   Error:
> >   Access to performance monitoring and observability operations is limited.
> >   Enforced MAC policy settings (SELinux) can limit access to performance
> >   monitoring and observability operations. Inspect system audit records for
> >   more perf_event access control information and adjusting the policy.
> >   Consider adjusting /proc/sys/kernel/perf_event_paranoid setting to open
> >   access to performance monitoring and observability operations for processes
> >   without CAP_PERFMON, CAP_SYS_PTRACE or CAP_SYS_ADMIN Linux capability.
> >   More information can be found at 'Perf events and tool security' document:
> >   https://www.kernel.org/doc/html/latest/admin-guide/perf-security.html
> >   perf_event_paranoid setting is 2:
> >     -1: Allow use of (almost) all events by all users
> >         Ignore mlock limit after perf_event_mlock_kb without CAP_IPC_LOCK
> >   >= 0: Disallow raw and ftrace function tracepoint access
> >   >= 1: Disallow CPU event access
> >   >= 2: Disallow kernel profiling
> >   To make the adjusted perf_event_paranoid setting permanent preserve it
> >   in /etc/sysctl.conf (e.g. kernel.perf_event_paranoid = <setting>)
> 
> Hmm, I would rather like pointing manpages...

Man pages are long, if you quote the relevant part of it when the
problem takes place, IMHO it helps the user.

- Arnaldo
 
> Would we better to have perf-security.7 manpage?
> 
> Thank you,
> 
> >   $
> > 
> > - Arnaldo
> > 
> > > 
> > > > 
> > > > Different combinations of privilege, perf_event_paranoid, kptr_restrict:
> > > > 
> > > >    Normal/Root user
> > > >     |   perf_event_paranoid
> > > >     V    V   kptr_restrict        perf probe error
> > > >    ----------------------------------------------------------------
> > > >     N   -1    0     Failed to open kprobe_events: Permission denied
> > > >     N    0    0     Failed to open kprobe_events: Permission denied
> > > >     N    1    0     Failed to open kprobe_events: Permission denied
> > > >     N    2    0     Relocated base symbol is not found!
> > > >    
> > > >     N   -1    1     Relocated base symbol is not found!
> > > >     N    0    1     Relocated base symbol is not found!
> > > >     N    1    1     Relocated base symbol is not found!
> > > >     N    2    1     Relocated base symbol is not found!
> > > >    
> > > >     N   -1    2     Relocated base symbol is not found!
> > > >     N    0    2     Relocated base symbol is not found!
> > > >     N    1    2     Relocated base symbol is not found!
> > > >     N    2    2     Relocated base symbol is not found!
> > > >    
> > > >     R   -1    0     No error.
> > > >     R    0    0     No error.
> > > >     R    1    0     No error.
> > > >     R    2    0     No error.
> > > >    
> > > >     R   -1    1     No error.
> > > >     R    0    1     No error.
> > > >     R    1    1     No error.
> > > >     R    2    1     No error.
> > > >    
> > > >     R   -1    2     Relocated base symbol is not found!
> > > >     R    0    2     Relocated base symbol is not found!
> > > >     R    1    2     Relocated base symbol is not found!
> > > >     R    2    2     Relocated base symbol is not found!
> > > > 
> > > > Ravi
> > > 
> > > 
> > > -- 
> > > Masami Hiramatsu <mhiramat@xxxxxxxxxx>
> > 
> > -- 
> > 
> > - Arnaldo
> 
> 
> -- 
> Masami Hiramatsu <mhiramat@xxxxxxxxxx>

-- 

- Arnaldo