[PATCH 4/8] dt-bindings: pinctrl: Add Nuvoton WPCM450

[Jonathan Neuschäfer]

This binding is heavily based on the one for NPCM7xx, because the
hardware is similar. One notable difference is that there are no
sub-nodes for GPIO banks, because the GPIO registers are arranged
differently.

Certain pins support blink patterns in hardware. This is currently not
modelled in the DT binding.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
---
 .../pinctrl/nuvoton,wpcm450-pinctrl.yaml      | 142 ++++++++++++++++++
 1 file changed, 142 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
new file mode 100644
index 0000000000000..0664fe2b90db6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nuvoton,wpcm450-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton WPCM450 pin control and GPIO
+
+maintainers:
+  - Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
+
+properties:
+  compatible:
+    const: "nuvoton,wpcm450-pinctrl"
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts: true
+
+patternProperties:
+  # There are two kinds of subnodes:
+  # 1. a pinmux node configures pin muxing for a group of pins (e.g. rmii2)
+  # 2. a pinctrl node configures properties of a single pin
+  "^.*$":
+    if:
+      type: object
+    then:
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+      properties:
+        groups:
+          description:
+            One or more groups of pins to mux to a certain function
+          minItems: 1
+          items:
+            enum: [ smb3, smb4, smb5, scs1, scs2, scs3, smb0, smb1, smb2, bsp,
+                    hsp1, hsp2, r1err, r1md, rmii2, r2err, r2md, kbcc, dvo,
+                    clko, smi, uinc, gspi, mben, xcs2, xcs1, sdio, sspi, fi0,
+                    fi1, fi2, fi3, fi4, fi5, fi6, fi7, fi8, fi9, fi10, fi11,
+                    fi12, fi13, fi14, fi15, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5,
+                    pwm6, pwm7, hg0, hg1, hg2, hg3, hg4, hg5, hg6, hg7 ]
+        function:
+          description:
+            The function that a group of pins is muxed to
+          enum: [ smb3, smb4, smb5, scs1, scs2, scs3, smb0, smb1, smb2, bsp,
+                  hsp1, hsp2, r1err, r1md, rmii2, r2err, r2md, kbcc, dvo0,
+                  dvo1, dvo2, dvo3, dvo4, dvo5, dvo6, dvo7, clko, smi, uinc,
+                  gspi, mben, xcs2, xcs1, sdio, sspi, fi0, fi1, fi2, fi3, fi4,
+                  fi5, fi6, fi7, fi8, fi9, fi10, fi11, fi12, fi13, fi14, fi15,
+                  pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, pwm6, pwm7, hg0, hg1,
+                  hg2, hg3, hg4, hg5, hg6, hg7 ]
+
+        pins:
+          description:
+            A list of pins to configure in certain ways, such as enabling
+            debouncing
+          minItems: 1
+          items:
+            enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
+                    gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14,
+                    gpio15, gpio16, gpio17, gpio18, gpio19, gpio20, gpio21,
+                    gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, gpio28,
+                    gpio29, gpio30, gpio31, gpio32, gpio33, gpio34, gpio35,
+                    gpio36, gpio37, gpio38, gpio39, gpio40, gpio41, gpio42,
+                    gpio43, gpio44, gpio45, gpio46, gpio47, gpio48, gpio49,
+                    gpio50, gpio51, gpio52, gpio53, gpio54, gpio55, gpio56,
+                    gpio57, gpio58, gpio59, gpio60, gpio61, gpio62, gpio63,
+                    gpio64, gpio65, gpio66, gpio67, gpio68, gpio69, gpio70,
+                    gpio71, gpio72, gpio73, gpio74, gpio75, gpio76, gpio77,
+                    gpio78, gpio79, gpio80, gpio81, gpio82, gpio83, gpio84,
+                    gpio85, gpio86, gpio87, gpio88, gpio89, gpio90, gpio91,
+                    gpio92, gpio93, gpio94, gpio95, gpio96, gpio97, gpio98,
+                    gpio99, gpio100, gpio101, gpio102, gpio103, gpio104,
+                    gpio105, gpio106, gpio107, gpio108, gpio109, gpio110,
+                    gpio111, gpio112, gpio113, gpio114, gpio115, gpio116,
+                    gpio117, gpio118, gpio119, gpio120, gpio121, gpio122,
+                    gpio123, gpio124, gpio125, gpio126, gpio127 ]
+
+        input-debounce: true
+        phandle: true
+
+      dependencies:
+        groups: [ function ]
+        function: [ groups ]
+
+      additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    pinctrl: pinctrl@b8003000 {
+      compatible = "nuvoton,wpcm450-pinctrl";
+      reg = <0xb8003000 0x1000>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupts = <2 IRQ_TYPE_LEVEL_HIGH
+                    3 IRQ_TYPE_LEVEL_HIGH
+                    4 IRQ_TYPE_LEVEL_HIGH
+                    5 IRQ_TYPE_LEVEL_HIGH>;
+      rmii2 {
+        groups = "rmii2";
+        function = "rmii2";
+      };
+
+      pinctrl_uid: uid {
+        pins = "gpio14";
+        input-debounce = <1>;
+      };
+    };
+
+    gpio-keys {
+      compatible = "gpio-keys";
+      pinctrl-names = "default";
+      pinctrl-0 = <&pinctrl_uid>;
+
+      uid {
+        label = "UID";
+        linux,code = <102>;
+        gpios = <&pinctrl 14 GPIO_ACTIVE_HIGH>;
+      };
+    };
--
2.30.2