Re: [PATCH] ARM: dts: stm32: set stm32mp157c-odyssey DCMI pins

[Ahmad Fatoum]

On 03.06.21 16:49, Grzegorz Szymaszek wrote:
> Hello Ahmad,
> 
> On Thu, Jun 03, 2021 at 04:26:59PM +0200, Ahmad Fatoum wrote:
>> On 03.06.21 16:23, Grzegorz Szymaszek wrote:
>>> The Seeed Odyssey-STM32MP157C board has a 20-pin DVP camera output.
>>> stm32mp15-pinctrl.dtsi contains one pin state definition for the DCMI
>>> interface, dcmi-0, AKA phandle dcmi_pins_a. This definition is
>>> incompatible with the pins used on the Odyssey board, where:
>>> - there are 8 data pins instead of 12,
>>> - […]
>>>
>>> Override the dcmi_pins_a definition (as well as dcmi_sleep_pins_a) in
>>> the Odyssey device tree.
>>
>> Rather define a new pinctrl group (e.g. &dcmi_pins_b) and use that
>> instead of overriding an existing one.
> 
> Can I simply use dcmi_pins_b (as the first unused identifier) or is
> there some way to match specific pin groups to an identifier (b, c, d,
> and so on)?

Just take the next available. That's how I did it so far.

>> Current convention is also to place all STM32MP1 pinctrl nodes into
>> a central file, not in the individual board device trees.
> 
> Sure, I will update the patch.
> 
> Thanks for your comments!

Cheers,
Ahmad

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |