[PATCH v1 2/3] i2c: designware: Use DIV_ROUND_CLOSEST() macro

[Andy Shevchenko]

Instead of open-coding DIV_ROUND_CLOSEST() and similar use the macros directly.
While at it, replace numbers with predefined SI metric prefixes.

No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-designware-common.c  | 8 ++++----
 drivers/i2c/busses/i2c-designware-platdrv.c | 6 +++---
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index fdc34d9e3702..9df101d1a34f 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -24,6 +24,7 @@
 #include <linux/regmap.h>
 #include <linux/swab.h>
 #include <linux/types.h>
+#include <linux/units.h>
 
 #include "i2c-designware-core.h"
 
@@ -350,7 +351,7 @@ u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
 		 *
 		 * If your hardware is free from tHD;STA issue, try this one.
 		 */
-		return (ic_clk * tSYMBOL + 500000) / 1000000 - 8 + offset;
+		return DIV_ROUND_CLOSEST(ic_clk * tSYMBOL, MEGA) - 8 + offset;
 	else
 		/*
 		 * Conditional expression:
@@ -366,8 +367,7 @@ u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
 		 * The reason why we need to take into account "tf" here,
 		 * is the same as described in i2c_dw_scl_lcnt().
 		 */
-		return (ic_clk * (tSYMBOL + tf) + 500000) / 1000000
-			- 3 + offset;
+		return DIV_ROUND_CLOSEST(ic_clk * (tSYMBOL + tf), MEGA) - 3 + offset;
 }
 
 u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
@@ -383,7 +383,7 @@ u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
 	 * account the fall time of SCL signal (tf).  Default tf value
 	 * should be 0.3 us, for safety.
 	 */
-	return ((ic_clk * (tLOW + tf) + 500000) / 1000000) - 1 + offset;
+	return DIV_ROUND_CLOSEST(ic_clk * (tLOW + tf), MEGA) - 1 + offset;
 }
 
 int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev)
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 4b37f28ec0c6..099e303d22bb 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -31,12 +31,13 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/suspend.h>
+#include <linux/units.h>
 
 #include "i2c-designware-core.h"
 
 static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
 {
-	return clk_get_rate(dev->clk)/1000;
+	return clk_get_rate(dev->clk) / KILO;
 }
 
 #ifdef CONFIG_ACPI
@@ -269,8 +270,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 		clk_khz = dev->get_clk_rate_khz(dev);
 
 		if (!dev->sda_hold_time && t->sda_hold_ns)
-			dev->sda_hold_time =
-				div_u64(clk_khz * t->sda_hold_ns + 500000, 1000000);
+			dev->sda_hold_time = DIV_S64_ROUND_CLOSEST(clk_khz * t->sda_hold_ns, MEGA);
 	}
 
 	adap = &dev->adapter;
-- 
2.30.2