Re: [PATCH v1 1/1] iio: hid-sensors: lighten the exported symbols by introducing IIO_HID namespace

From: Srinivas Pandruvada
Date: Thu Jun 03 2021 - 16:01:31 EST

Next message: André Almeida: "[PATCH v4 12/15] selftests: futex2: Add requeue test"
Previous message: André Almeida: "[PATCH v4 11/15] selftests: futex2: Add waitv test"
In reply to: Jonathan Cameron: "Re: [PATCH v1 1/1] iio: hid-sensors: lighten the exported symbols by introducing IIO_HID namespace"
Next in thread: srinivas pandruvada: "Re: [PATCH v1 1/1] iio: hid-sensors: lighten the exported symbols by introducing IIO_HID namespace"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Thu, 2021-06-03 at 18:07 +0100, Jonathan Cameron wrote:
> On Tue, 25 May 2021 16:21:19 +0300
> Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> wrote:
>
> > A namespace for exported symbols makes clear who is a provider and
> > who is
> > a consumer of the certain resources. Besides that, it doesn't
> > pollute
> > the common namespace.
> >
> > Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
>
> I'm fine with this, but looking for input from Srinivas and Jiri
> before
> I apply it.

I see these names are using "IIO_HID" and "IIO_HID_ATTRIBUTES".
Since they are only used in hid-sensors, may be explicitly define
"HID_SENSOR_IIO". Also prefer only one name space.

Thanks,
Srinivas

>
> > ---
> >
> > Jonothan et al. This is just a work against HID IIO sensor drivers,
> > I think
> > that entire IIO can gain from namespaces. But I leave it for you to
> > decide and
> > how to proceed / convert.
>
> It's been on the todo list since Jon Corbetts recent LWN article
> pointing out
> how underused this feature is which reminded me of it's existence.
>
> I agree in principle with doing it, but that is going to be a rather
> big
> single shot patch. One for early in a cycle I think.
>
> We have a lot of multi-module drivers as well where this might have
> benefits
> and would be a rather more contained change.
>
> Jonathan
>
> > Yes, due to nature of this (kind of) change it may not be split.
> >
> > drivers/iio/accel/hid-sensor-accel-3d.c | 1 +
> > .../hid-sensors/hid-sensor-attributes.c | 26 +++++++++----
> > ------
> > .../common/hid-sensors/hid-sensor-trigger.c | 9 ++++---
> > drivers/iio/gyro/hid-sensor-gyro-3d.c | 1 +
> > drivers/iio/humidity/hid-sensor-humidity.c | 1 +
> > drivers/iio/light/hid-sensor-als.c | 1 +
> > drivers/iio/light/hid-sensor-prox.c | 1 +
> > drivers/iio/magnetometer/hid-sensor-magn-3d.c | 1 +
> > drivers/iio/orientation/hid-sensor-incl-3d.c | 1 +
> > drivers/iio/orientation/hid-sensor-rotation.c | 1 +
> > .../position/hid-sensor-custom-intel-hinge.c | 1 +
> > drivers/iio/pressure/hid-sensor-press.c | 1 +
> > .../iio/temperature/hid-sensor-temperature.c | 1 +
> > 13 files changed, 29 insertions(+), 17 deletions(-)
> >
> > diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c
> > b/drivers/iio/accel/hid-sensor-accel-3d.c
> > index 27f47e1c251e..bcafca7b2eac 100644
> > --- a/drivers/iio/accel/hid-sensor-accel-3d.c
> > +++ b/drivers/iio/accel/hid-sensor-accel-3d.c
> > @@ -465,3 +465,4 @@
> > module_platform_driver(hid_accel_3d_platform_driver);
> > MODULE_DESCRIPTION("HID Sensor Accel 3D");
> > MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxx>
> > ");
> > MODULE_LICENSE("GPL");
> > +MODULE_IMPORT_NS(IIO_HID);
> > diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
> > b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
> > index cb52b4fd6bf7..a81a0b206af6 100644
> > --- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
> > +++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
> > @@ -176,7 +176,7 @@ s32 hid_sensor_read_poll_value(struct
> > hid_sensor_common *st)
> >
> > return value;
> > }
> > -EXPORT_SYMBOL(hid_sensor_read_poll_value);
> > +EXPORT_SYMBOL_NS(hid_sensor_read_poll_value, IIO_HID_ATTRIBUTES);
> >
> > int hid_sensor_read_samp_freq_value(struct hid_sensor_common *st,
> > int *val1, int *val2)
> > @@ -203,7 +203,7 @@ int hid_sensor_read_samp_freq_value(struct
> > hid_sensor_common *st,
> >
> > return IIO_VAL_INT_PLUS_MICRO;
> > }
> > -EXPORT_SYMBOL(hid_sensor_read_samp_freq_value);
> > +EXPORT_SYMBOL_NS(hid_sensor_read_samp_freq_value, IIO_HID);
> >
> > int hid_sensor_write_samp_freq_value(struct hid_sensor_common *st,
> > int val1, int val2)
> > @@ -238,7 +238,7 @@ int hid_sensor_write_samp_freq_value(struct
> > hid_sensor_common *st,
> >
> > return 0;
> > }
> > -EXPORT_SYMBOL(hid_sensor_write_samp_freq_value);
> > +EXPORT_SYMBOL_NS(hid_sensor_write_samp_freq_value, IIO_HID);
> >
> > int hid_sensor_read_raw_hyst_value(struct hid_sensor_common *st,
> > int *val1, int *val2)
> > @@ -261,7 +261,7 @@ int hid_sensor_read_raw_hyst_value(struct
> > hid_sensor_common *st,
> >
> > return IIO_VAL_INT_PLUS_MICRO;
> > }
> > -EXPORT_SYMBOL(hid_sensor_read_raw_hyst_value);
> > +EXPORT_SYMBOL_NS(hid_sensor_read_raw_hyst_value, IIO_HID);
> >
> > int hid_sensor_read_raw_hyst_rel_value(struct hid_sensor_common
> > *st, int *val1,
> > int *val2)
> > @@ -283,7 +283,7 @@ int hid_sensor_read_raw_hyst_rel_value(struct
> > hid_sensor_common *st, int *val1,
> >
> > return IIO_VAL_INT_PLUS_MICRO;
> > }
> > -EXPORT_SYMBOL(hid_sensor_read_raw_hyst_rel_value);
> > +EXPORT_SYMBOL_NS(hid_sensor_read_raw_hyst_rel_value, IIO_HID);
> >
> >
> > int hid_sensor_write_raw_hyst_value(struct hid_sensor_common *st,
> > @@ -315,7 +315,7 @@ int hid_sensor_write_raw_hyst_value(struct
> > hid_sensor_common *st,
> >
> > return 0;
> > }
> > -EXPORT_SYMBOL(hid_sensor_write_raw_hyst_value);
> > +EXPORT_SYMBOL_NS(hid_sensor_write_raw_hyst_value, IIO_HID);
> >
> > int hid_sensor_write_raw_hyst_rel_value(struct hid_sensor_common
> > *st,
> > int val1, int val2)
> > @@ -346,7 +346,7 @@ int hid_sensor_write_raw_hyst_rel_value(struct
> > hid_sensor_common *st,
> >
> > return 0;
> > }
> > -EXPORT_SYMBOL(hid_sensor_write_raw_hyst_rel_value);
> > +EXPORT_SYMBOL_NS(hid_sensor_write_raw_hyst_rel_value, IIO_HID);
> >
> > /*
> > * This fuction applies the unit exponent to the scale.
> > @@ -430,14 +430,14 @@ int hid_sensor_format_scale(u32 usage_id,
> >
> > return IIO_VAL_INT_PLUS_NANO;
> > }
> > -EXPORT_SYMBOL(hid_sensor_format_scale);
> > +EXPORT_SYMBOL_NS(hid_sensor_format_scale, IIO_HID);
> >
> > int64_t hid_sensor_convert_timestamp(struct hid_sensor_common *st,
> > int64_t raw_value)
> > {
> > return st->timestamp_ns_scale * raw_value;
> > }
> > -EXPORT_SYMBOL(hid_sensor_convert_timestamp);
> > +EXPORT_SYMBOL_NS(hid_sensor_convert_timestamp, IIO_HID);
> >
> > static
> > int hid_sensor_get_reporting_interval(struct hid_sensor_hub_device
> > *hsdev,
> > @@ -484,7 +484,7 @@ int hid_sensor_get_report_latency(struct
> > hid_sensor_common *st)
> >
> > return value;
> > }
> > -EXPORT_SYMBOL(hid_sensor_get_report_latency);
> > +EXPORT_SYMBOL_NS(hid_sensor_get_report_latency,
> > IIO_HID_ATTRIBUTES);
> >
> > int hid_sensor_set_report_latency(struct hid_sensor_common *st,
> > int latency_ms)
> > {
> > @@ -492,13 +492,13 @@ int hid_sensor_set_report_latency(struct
> > hid_sensor_common *st, int latency_ms)
> > st->report_latency.index,
> > sizeof(latency_ms), &latency_ms);
> > }
> > -EXPORT_SYMBOL(hid_sensor_set_report_latency);
> > +EXPORT_SYMBOL_NS(hid_sensor_set_report_latency,
> > IIO_HID_ATTRIBUTES);
> >
> > bool hid_sensor_batch_mode_supported(struct hid_sensor_common *st)
> > {
> > return st->report_latency.index > 0 && st-
> > >report_latency.report_id > 0;
> > }
> > -EXPORT_SYMBOL(hid_sensor_batch_mode_supported);
> > +EXPORT_SYMBOL_NS(hid_sensor_batch_mode_supported,
> > IIO_HID_ATTRIBUTES);
> >
> > int hid_sensor_parse_common_attributes(struct
> > hid_sensor_hub_device *hsdev,
> > u32 usage_id,
> > @@ -590,7 +590,7 @@ int hid_sensor_parse_common_attributes(struct
> > hid_sensor_hub_device *hsdev,
> >
> > return 0;
> > }
> > -EXPORT_SYMBOL(hid_sensor_parse_common_attributes);
> > +EXPORT_SYMBOL_NS(hid_sensor_parse_common_attributes, IIO_HID);
> >
> > MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxx>
> > ");
> > MODULE_DESCRIPTION("HID Sensor common attribute processing");
> > diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
> > b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
> > index c06537e106e9..60e85d675387 100644
> > --- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
> > +++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
> > @@ -150,7 +150,7 @@ static int _hid_sensor_power_state(struct
> > hid_sensor_common *st, bool state)
> >
> > return 0;
> > }
> > -EXPORT_SYMBOL(hid_sensor_power_state);
> > +EXPORT_SYMBOL_NS(hid_sensor_power_state, IIO_HID);
> >
> > int hid_sensor_power_state(struct hid_sensor_common *st, bool
> > state)
> > {
> > @@ -225,7 +225,7 @@ void hid_sensor_remove_trigger(struct iio_dev
> > *indio_dev,
> > iio_trigger_free(attrb->trigger);
> > iio_triggered_buffer_cleanup(indio_dev);
> > }
> > -EXPORT_SYMBOL(hid_sensor_remove_trigger);
> > +EXPORT_SYMBOL_NS(hid_sensor_remove_trigger, IIO_HID);
> >
> > static const struct iio_trigger_ops hid_sensor_trigger_ops = {
> > .set_trigger_state = &hid_sensor_data_rdy_trigger_set_state,
> > @@ -291,7 +291,7 @@ int hid_sensor_setup_trigger(struct iio_dev
> > *indio_dev, const char *name,
> > iio_triggered_buffer_cleanup(indio_dev);
> > return ret;
> > }
> > -EXPORT_SYMBOL(hid_sensor_setup_trigger);
> > +EXPORT_SYMBOL_NS(hid_sensor_setup_trigger, IIO_HID);
> >
> > static int __maybe_unused hid_sensor_suspend(struct device *dev)
> > {
> > @@ -321,8 +321,9 @@ const struct dev_pm_ops hid_sensor_pm_ops = {
> > SET_RUNTIME_PM_OPS(hid_sensor_suspend,
> > hid_sensor_runtime_resume, NULL)
> > };
> > -EXPORT_SYMBOL(hid_sensor_pm_ops);
> > +EXPORT_SYMBOL_NS(hid_sensor_pm_ops, IIO_HID);
> >
> > MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxx>
> > ");
> > MODULE_DESCRIPTION("HID Sensor trigger processing");
> > MODULE_LICENSE("GPL");
> > +MODULE_IMPORT_NS(IIO_HID_ATTRIBUTES);
> > diff --git a/drivers/iio/gyro/hid-sensor-gyro-3d.c
> > b/drivers/iio/gyro/hid-sensor-gyro-3d.c
> > index dad26ee4fd1f..2ed2a8effb86 100644
> > --- a/drivers/iio/gyro/hid-sensor-gyro-3d.c
> > +++ b/drivers/iio/gyro/hid-sensor-gyro-3d.c
> > @@ -400,3 +400,4 @@
> > module_platform_driver(hid_gyro_3d_platform_driver);
> > MODULE_DESCRIPTION("HID Sensor Gyroscope 3D");
> > MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxx>
> > ");
> > MODULE_LICENSE("GPL");
> > +MODULE_IMPORT_NS(IIO_HID);
> > diff --git a/drivers/iio/humidity/hid-sensor-humidity.c
> > b/drivers/iio/humidity/hid-sensor-humidity.c
> > index 74383abc0d44..8a9091d71d2a 100644
> > --- a/drivers/iio/humidity/hid-sensor-humidity.c
> > +++ b/drivers/iio/humidity/hid-sensor-humidity.c
> > @@ -295,3 +295,4 @@
> > module_platform_driver(hid_humidity_platform_driver);
> > MODULE_DESCRIPTION("HID Environmental humidity sensor");
> > MODULE_AUTHOR("Song Hongyan <hongyan.song@xxxxxxxxx>");
> > MODULE_LICENSE("GPL v2");
> > +MODULE_IMPORT_NS(IIO_HID);
> > diff --git a/drivers/iio/light/hid-sensor-als.c
> > b/drivers/iio/light/hid-sensor-als.c
> > index 85c8a05b73cb..a63d577493e2 100644
> > --- a/drivers/iio/light/hid-sensor-als.c
> > +++ b/drivers/iio/light/hid-sensor-als.c
> > @@ -392,3 +392,4 @@
> > module_platform_driver(hid_als_platform_driver);
> > MODULE_DESCRIPTION("HID Sensor ALS");
> > MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxx>
> > ");
> > MODULE_LICENSE("GPL");
> > +MODULE_IMPORT_NS(IIO_HID);
> > diff --git a/drivers/iio/light/hid-sensor-prox.c
> > b/drivers/iio/light/hid-sensor-prox.c
> > index 17d167c3d595..99de268563d6 100644
> > --- a/drivers/iio/light/hid-sensor-prox.c
> > +++ b/drivers/iio/light/hid-sensor-prox.c
> > @@ -350,3 +350,4 @@
> > module_platform_driver(hid_prox_platform_driver);
> > MODULE_DESCRIPTION("HID Sensor Proximity");
> > MODULE_AUTHOR("Archana Patni <archana.patni@xxxxxxxxx>");
> > MODULE_LICENSE("GPL");
> > +MODULE_IMPORT_NS(IIO_HID);
> > diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c
> > b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
> > index b78691523dd4..a66f9e933628 100644
> > --- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c
> > +++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
> > @@ -587,3 +587,4 @@
> > module_platform_driver(hid_magn_3d_platform_driver);
> > MODULE_DESCRIPTION("HID Sensor Magnetometer 3D");
> > MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxx>
> > ");
> > MODULE_LICENSE("GPL");
> > +MODULE_IMPORT_NS(IIO_HID);
> > diff --git a/drivers/iio/orientation/hid-sensor-incl-3d.c
> > b/drivers/iio/orientation/hid-sensor-incl-3d.c
> > index 7af48d336285..cc905b0fa835 100644
> > --- a/drivers/iio/orientation/hid-sensor-incl-3d.c
> > +++ b/drivers/iio/orientation/hid-sensor-incl-3d.c
> > @@ -425,3 +425,4 @@
> > module_platform_driver(hid_incl_3d_platform_driver);
> > MODULE_DESCRIPTION("HID Sensor Inclinometer 3D");
> > MODULE_AUTHOR("Srinivas Pandruvada <
> > srinivas.pandruvada@xxxxxxxxxxxxxxx>");
> > MODULE_LICENSE("GPL");
> > +MODULE_IMPORT_NS(IIO_HID);
> > diff --git a/drivers/iio/orientation/hid-sensor-rotation.c
> > b/drivers/iio/orientation/hid-sensor-rotation.c
> > index cf7f57a47681..6570bfd22035 100644
> > --- a/drivers/iio/orientation/hid-sensor-rotation.c
> > +++ b/drivers/iio/orientation/hid-sensor-rotation.c
> > @@ -373,3 +373,4 @@
> > module_platform_driver(hid_dev_rot_platform_driver);
> > MODULE_DESCRIPTION("HID Sensor Device Rotation");
> > MODULE_AUTHOR("Srinivas Pandruvada <
> > srinivas.pandruvada@xxxxxxxxxxxxxxx>");
> > MODULE_LICENSE("GPL");
> > +MODULE_IMPORT_NS(IIO_HID);
> > diff --git a/drivers/iio/position/hid-sensor-custom-intel-hinge.c
> > b/drivers/iio/position/hid-sensor-custom-intel-hinge.c
> > index 738b5f4626ce..4478ad9387c5 100644
> > --- a/drivers/iio/position/hid-sensor-custom-intel-hinge.c
> > +++ b/drivers/iio/position/hid-sensor-custom-intel-hinge.c
> > @@ -376,3 +376,4 @@
> > module_platform_driver(hid_hinge_platform_driver);
> > MODULE_DESCRIPTION("HID Sensor INTEL Hinge");
> > MODULE_AUTHOR("Ye Xiang <xiang.ye@xxxxxxxxx>");
> > MODULE_LICENSE("GPL");
> > +MODULE_IMPORT_NS(IIO_HID);
> > diff --git a/drivers/iio/pressure/hid-sensor-press.c
> > b/drivers/iio/pressure/hid-sensor-press.c
> > index c416d261e3e3..79b3399e4095 100644
> > --- a/drivers/iio/pressure/hid-sensor-press.c
> > +++ b/drivers/iio/pressure/hid-sensor-press.c
> > @@ -357,3 +357,4 @@
> > module_platform_driver(hid_press_platform_driver);
> > MODULE_DESCRIPTION("HID Sensor Pressure");
> > MODULE_AUTHOR("Archana Patni <archana.patni@xxxxxxxxx>");
> > MODULE_LICENSE("GPL");
> > +MODULE_IMPORT_NS(IIO_HID);
> > diff --git a/drivers/iio/temperature/hid-sensor-temperature.c
> > b/drivers/iio/temperature/hid-sensor-temperature.c
> > index dc534ed784c3..21aa952b9f6d 100644
> > --- a/drivers/iio/temperature/hid-sensor-temperature.c
> > +++ b/drivers/iio/temperature/hid-sensor-temperature.c
> > @@ -291,3 +291,4 @@
> > module_platform_driver(hid_temperature_platform_driver);
> > MODULE_DESCRIPTION("HID Environmental temperature sensor");
> > MODULE_AUTHOR("Song Hongyan <hongyan.song@xxxxxxxxx>");
> > MODULE_LICENSE("GPL v2");
> > +MODULE_IMPORT_NS(IIO_HID);

Next message: André Almeida: "[PATCH v4 12/15] selftests: futex2: Add requeue test"
Previous message: André Almeida: "[PATCH v4 11/15] selftests: futex2: Add waitv test"
In reply to: Jonathan Cameron: "Re: [PATCH v1 1/1] iio: hid-sensors: lighten the exported symbols by introducing IIO_HID namespace"
Next in thread: srinivas pandruvada: "Re: [PATCH v1 1/1] iio: hid-sensors: lighten the exported symbols by introducing IIO_HID namespace"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]