Re: [PATCH v3 1/5] dt-bindings: aspeed-sgpio: Convert txt bindings to yaml.

[Andrew Jeffery]

Hi Steven,

On Thu, 3 Jun 2021, at 19:48, Steven Lee wrote:
> sgpio-aspeed bindings should be converted to yaml format.
> 
> Signed-off-by: Steven Lee <steven_lee@xxxxxxxxxxxxxx>
> ---
>  .../bindings/gpio/aspeed,sgpio.yaml           | 78 +++++++++++++++++++
>  .../devicetree/bindings/gpio/sgpio-aspeed.txt | 46 -----------
>  2 files changed, 78 insertions(+), 46 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
>  delete mode 100644 Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
> 
> diff --git a/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml 
> b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
> new file mode 100644
> index 000000000000..e7c2113cc096
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
> @@ -0,0 +1,78 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/gpio/aspeed,sgpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Aspeed SGPIO controller
> +
> +maintainers:
> +  - Andrew Jeffery <andrew@xxxxxxxx>
> +
> +description:
> +  This SGPIO controller is for ASPEED AST2400, AST2500 and AST2600 SoC,
> +  AST2600 have two sgpio master one with 128 pins another one with 80 
> pins,
> +  AST2500/AST2400 have one sgpio master with 80 pins. Each of the 
> Serial
> +  GPIO pins can be programmed to support the following options
> +  - Support interrupt option for each input port and various interrupt
> +    sensitivity option (level-high, level-low, edge-high, edge-low)
> +  - Support reset tolerance option for each output port
> +  - Directly connected to APB bus and its shift clock is from APB bus 
> clock
> +    divided by a programmable value.
> +  - Co-work with external signal-chained TTL components 
> (74LV165/74LV595)
> +
> +properties:
> +  compatible:
> +    enum:
> +      - aspeed,ast2400-sgpio
> +      - aspeed,ast2500-sgpio
> +      - aspeed,ast2600-sgpiom1
> +      - aspeed,ast2600-sgpiom2

You should have followed Rob's request here and made two patches for 
the binding document:

1. A 1-to-1 conversion of the text file to dt-schema
2. Add your new compatibles for the 2600.

>From a cursory glance it looks okay except for the new compatibles.

Regarding the compatibles, I'd prefer we use something a bit more 
meaningful. What do you think of these?

- aspeed,ast2600-sgpiom-80
- aspeed,ast2600-sgpiom-128

Cheers,

Andrew