[PATCH] powerpc: Remove klimit
From: Christophe Leroy
Date: Fri Jun 04 2021 - 05:57:42 EST
klimit is a global variable initialised at build time with the
value of _end.
This variable is never modified, so _end symbol can be used directly.
Remove klimit.
Signed-off-by: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
Cc: Kefeng Wang <wangkefeng.wang@xxxxxxxxxx>
---
arch/powerpc/include/asm/setup.h | 1 -
arch/powerpc/kernel/head_book3s_32.S | 6 ++----
arch/powerpc/kernel/prom.c | 2 +-
arch/powerpc/kernel/setup-common.c | 4 +---
arch/powerpc/platforms/powermac/bootx_init.c | 2 +-
5 files changed, 5 insertions(+), 10 deletions(-)
diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h
index e89bfebd4e00..6c1a7d217d1a 100644
--- a/arch/powerpc/include/asm/setup.h
+++ b/arch/powerpc/include/asm/setup.h
@@ -10,7 +10,6 @@ extern void ppc_printk_progress(char *s, unsigned short hex);
extern unsigned int rtas_data;
extern unsigned long long memory_limit;
extern bool init_mem_is_free;
-extern unsigned long klimit;
extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
struct device_node;
diff --git a/arch/powerpc/kernel/head_book3s_32.S b/arch/powerpc/kernel/head_book3s_32.S
index 326262030279..b724e88bcdaf 100644
--- a/arch/powerpc/kernel/head_book3s_32.S
+++ b/arch/powerpc/kernel/head_book3s_32.S
@@ -766,9 +766,6 @@ PerformanceMonitor:
* the kernel image to physical address PHYSICAL_START.
*/
relocate_kernel:
- addis r9,r26,klimit@ha /* fetch klimit */
- lwz r25,klimit@l(r9)
- addis r25,r25,-KERNELBASE@h
lis r3,PHYSICAL_START@h /* Destination base address */
li r6,0 /* Destination offset */
li r5,0x4000 /* # bytes of memory to copy */
@@ -776,7 +773,8 @@ relocate_kernel:
addi r0,r3,4f@l /* jump to the address of 4f */
mtctr r0 /* in copy and do the rest. */
bctr /* jump to the copy */
-4: mr r5,r25
+4: lis r5,_end-KERNELBASE@h
+ ori r5,r5,_end-KERNELBASE@l
bl copy_and_flush /* copy the rest */
b turn_on_mmu
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index fbe9deebc8e1..f620e04dc9bf 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -758,7 +758,7 @@ void __init early_init_devtree(void *params)
first_memblock_size = min_t(u64, first_memblock_size, memory_limit);
setup_initial_memory_limit(memstart_addr, first_memblock_size);
/* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */
- memblock_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
+ memblock_reserve(PHYSICAL_START, __pa(_end) - PHYSICAL_START);
/* If relocatable, reserve first 32k for interrupt vectors etc. */
if (PHYSICAL_START > MEMORY_START)
memblock_reserve(MEMORY_START, 0x8000);
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 74a98fff2c2f..138bb7f49ef9 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -91,8 +91,6 @@ EXPORT_SYMBOL_GPL(boot_cpuid);
int dcache_bsize;
int icache_bsize;
-unsigned long klimit = (unsigned long) _end;
-
/*
* This still seems to be needed... -- paulus
*/
@@ -930,7 +928,7 @@ void __init setup_arch(char **cmdline_p)
init_mm.start_code = (unsigned long)_stext;
init_mm.end_code = (unsigned long) _etext;
init_mm.end_data = (unsigned long) _edata;
- init_mm.brk = klimit;
+ init_mm.brk = (unsigned long)_end;
mm_iommu_init(&init_mm);
irqstack_early_init();
diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c
index 9d4ecd292255..d20ef35e6d9d 100644
--- a/arch/powerpc/platforms/powermac/bootx_init.c
+++ b/arch/powerpc/platforms/powermac/bootx_init.c
@@ -433,7 +433,7 @@ static void __init btext_welcome(boot_infos_t *bi)
bootx_printf("\nframe buffer at : 0x%x", bi->dispDeviceBase);
bootx_printf(" (phys), 0x%x", bi->logicalDisplayBase);
bootx_printf(" (log)");
- bootx_printf("\nklimit : 0x%x",(unsigned long)klimit);
+ bootx_printf("\nklimit : 0x%x",(unsigned long)_end);
bootx_printf("\nboot_info at : 0x%x", bi);
__asm__ __volatile__ ("mfmsr %0" : "=r" (flags));
bootx_printf("\nMSR : 0x%x", flags);
--
2.25.0