Re: [PATCH 7/9] power: supply: Drop BD70528 support

From: Sebastian Reichel
Date: Fri Jun 04 2021 - 06:10:46 EST

Hi Matti,

On Tue, May 25, 2021 at 01:15:47PM +0300, Matti Vaittinen wrote:
> The only known BD70528 use-cases are such that the PMIC is controlled
> from separate MCU which is not running Linux. I am not aware of
> any Linux driver users. Furthermore, it seems there is no demand for
> this IC. Let's ease the maintenance burden and drop the driver. We can
> always add it back if there is sudden need for it.
>
> Signed-off-by: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
>
> ---
> Please let me know if some of you think the driver is needed.
> ---

Thanks, queued.

-- Sebastian

> drivers/power/supply/Kconfig | 9 -
> drivers/power/supply/Makefile | 1 -
> drivers/power/supply/bd70528-charger.c | 710 -------------------------
> 3 files changed, 720 deletions(-)
> delete mode 100644 drivers/power/supply/bd70528-charger.c
>
> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> index e696364126f1..b99d19f48769 100644
> --- a/drivers/power/supply/Kconfig
> +++ b/drivers/power/supply/Kconfig
> @@ -760,15 +760,6 @@ config CHARGER_UCS1002
> Say Y to enable support for Microchip UCS1002 Programmable
> USB Port Power Controller with Charger Emulation.
>
> -config CHARGER_BD70528
> - tristate "ROHM bd70528 charger driver"
> - depends on MFD_ROHM_BD70528
> - select LINEAR_RANGES
> - help
> - Say Y here to enable support for getting battery status
> - information and altering charger configurations from charger
> - block of the ROHM BD70528 Power Management IC.
> -
> config CHARGER_BD99954
> tristate "ROHM bd99954 charger driver"
> depends on I2C
> diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
> index a7309a3d1a47..7ad7d9a05523 100644
> --- a/drivers/power/supply/Makefile
> +++ b/drivers/power/supply/Makefile
> @@ -96,7 +96,6 @@ obj-$(CONFIG_CHARGER_CROS_USBPD) += cros_usbpd-charger.o
> obj-$(CONFIG_CHARGER_SC2731) += sc2731_charger.o
> obj-$(CONFIG_FUEL_GAUGE_SC27XX) += sc27xx_fuel_gauge.o
> obj-$(CONFIG_CHARGER_UCS1002) += ucs1002_power.o
> -obj-$(CONFIG_CHARGER_BD70528) += bd70528-charger.o
> obj-$(CONFIG_CHARGER_BD99954) += bd99954-charger.o
> obj-$(CONFIG_CHARGER_WILCO) += wilco-charger.o
> obj-$(CONFIG_RN5T618_POWER) += rn5t618_power.o
> diff --git a/drivers/power/supply/bd70528-charger.c b/drivers/power/supply/bd70528-charger.c
> deleted file mode 100644
> index 7c1f0b99c71b..000000000000
> --- a/drivers/power/supply/bd70528-charger.c
> +++ /dev/null
> @@ -1,710 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-or-later
> -//
> -// Copyright (C) 2018 ROHM Semiconductors
> -//
> -// power-supply driver for ROHM BD70528 PMIC
> -
> -/*
> - * BD70528 charger HW state machine.
> - *
> - * The thermal shutdown state is not drawn. From any other state but
> - * battery error and suspend it is possible to go to TSD/TMP states
> - * if temperature is out of bounds.
> - *
> - * CHG_RST = H
> - * or CHG_EN=L
> - * or (DCIN2_UVLO=L && DCIN1_UVLO=L)
> - * or (DCIN2_OVLO=H & DCIN1_UVKLO=L)
> - *
> - * +--------------+ +--------------+
> - * | | | |
> - * | Any state +-------> | Suspend |
> - * | | | |
> - * +--------------+ +------+-------+
> - * |
> - * CHG_EN = H && BAT_DET = H && |
> - * No errors (temp, bat_ov, UVLO, |
> - * OVLO...) |
> - * |
> - * BAT_OV or +---------v----------+
> - * (DBAT && TTRI) | |
> - * +-----------------+ Trickle Charge | <---------------+
> - * | | | |
> - * | +-------+------------+ |
> - * | | |
> - * | | ^ |
> - * | V_BAT > VTRI_TH | | VBAT < VTRI_TH - 50mV |
> - * | | | |
> - * | v | |
> - * | | |
> - * | BAT_OV or +----------+----+ |
> - * | (DBAT && TFST) | | |
> - * | +----------------+ Fast Charge | |
> - * | | | | |
> - * v v +----+----------+ |
> - * | |
> - *+----------------+ ILIM_DET=L | ^ ILIM_DET |
> - *| | & CV_DET=H | | or CV_DET=L |
> - *| Battery Error | & VBAT > | | or VBAT < VRECHG_TH |
> - *| | VRECHG_TH | | or IBAT > IFST/x |
> - *+----------------+ & IBAT < | | |
> - * IFST/x v | |
> - * ^ | |
> - * | +---------+-+ |
> - * | | | |
> - * +-------------------+ Top OFF | |
> - * BAT_OV = H or | | |
> - * (DBAT && TFST) +-----+-----+ |
> - * | |
> - * Stay top-off for 15s | |
> - * v |
> - * |
> - * +--------+ |
> - * | | |
> - * | Done +-------------------------+
> - * | |
> - * +--------+ VBAT < VRECHG_TH
> - */
> -
> -#include <linux/kernel.h>
> -#include <linux/interrupt.h>
> -#include <linux/mfd/rohm-bd70528.h>
> -#include <linux/module.h>
> -#include <linux/platform_device.h>
> -#include <linux/power_supply.h>
> -#include <linux/linear_range.h>
> -
> -#define CHG_STAT_SUSPEND 0x0
> -#define CHG_STAT_TRICKLE 0x1
> -#define CHG_STAT_FAST 0x3
> -#define CHG_STAT_TOPOFF 0xe
> -#define CHG_STAT_DONE 0xf
> -#define CHG_STAT_OTP_TRICKLE 0x10
> -#define CHG_STAT_OTP_FAST 0x11
> -#define CHG_STAT_OTP_DONE 0x12
> -#define CHG_STAT_TSD_TRICKLE 0x20
> -#define CHG_STAT_TSD_FAST 0x21
> -#define CHG_STAT_TSD_TOPOFF 0x22
> -#define CHG_STAT_BAT_ERR 0x7f
> -
> -static const char *bd70528_charger_model = "BD70528";
> -static const char *bd70528_charger_manufacturer = "ROHM Semiconductors";
> -
> -#define BD_ERR_IRQ_HND(_name_, _wrn_) \
> -static irqreturn_t bd0528_##_name_##_interrupt(int irq, void *arg) \
> -{ \
> - struct power_supply *psy = (struct power_supply *)arg; \
> - \
> - power_supply_changed(psy); \
> - dev_err(&psy->dev, (_wrn_)); \
> - \
> - return IRQ_HANDLED; \
> -}
> -
> -#define BD_INFO_IRQ_HND(_name_, _wrn_) \
> -static irqreturn_t bd0528_##_name_##_interrupt(int irq, void *arg) \
> -{ \
> - struct power_supply *psy = (struct power_supply *)arg; \
> - \
> - power_supply_changed(psy); \
> - dev_dbg(&psy->dev, (_wrn_)); \
> - \
> - return IRQ_HANDLED; \
> -}
> -
> -#define BD_IRQ_HND(_name_) bd0528_##_name_##_interrupt
> -
> -struct bd70528_psy {
> - struct regmap *regmap;
> - struct device *dev;
> - struct power_supply *psy;
> -};
> -
> -BD_ERR_IRQ_HND(BAT_OV_DET, "Battery overvoltage detected\n");
> -BD_ERR_IRQ_HND(DBAT_DET, "Dead battery detected\n");
> -BD_ERR_IRQ_HND(COLD_DET, "Battery cold\n");
> -BD_ERR_IRQ_HND(HOT_DET, "Battery hot\n");
> -BD_ERR_IRQ_HND(CHG_TSD, "Charger thermal shutdown\n");
> -BD_ERR_IRQ_HND(DCIN2_OV_DET, "DCIN2 overvoltage detected\n");
> -
> -BD_INFO_IRQ_HND(BAT_OV_RES, "Battery voltage back to normal\n");
> -BD_INFO_IRQ_HND(COLD_RES, "Battery temperature back to normal\n");
> -BD_INFO_IRQ_HND(HOT_RES, "Battery temperature back to normal\n");
> -BD_INFO_IRQ_HND(BAT_RMV, "Battery removed\n");
> -BD_INFO_IRQ_HND(BAT_DET, "Battery detected\n");
> -BD_INFO_IRQ_HND(DCIN2_OV_RES, "DCIN2 voltage back to normal\n");
> -BD_INFO_IRQ_HND(DCIN2_RMV, "DCIN2 removed\n");
> -BD_INFO_IRQ_HND(DCIN2_DET, "DCIN2 detected\n");
> -BD_INFO_IRQ_HND(DCIN1_RMV, "DCIN1 removed\n");
> -BD_INFO_IRQ_HND(DCIN1_DET, "DCIN1 detected\n");
> -
> -struct irq_name_pair {
> - const char *n;
> - irqreturn_t (*h)(int irq, void *arg);
> -};
> -
> -static int bd70528_get_irqs(struct platform_device *pdev,
> - struct bd70528_psy *bdpsy)
> -{
> - int irq, i, ret;
> - unsigned int mask;
> - static const struct irq_name_pair bd70528_chg_irqs[] = {
> - { .n = "bd70528-bat-ov-res", .h = BD_IRQ_HND(BAT_OV_RES) },
> - { .n = "bd70528-bat-ov-det", .h = BD_IRQ_HND(BAT_OV_DET) },
> - { .n = "bd70528-bat-dead", .h = BD_IRQ_HND(DBAT_DET) },
> - { .n = "bd70528-bat-warmed", .h = BD_IRQ_HND(COLD_RES) },
> - { .n = "bd70528-bat-cold", .h = BD_IRQ_HND(COLD_DET) },
> - { .n = "bd70528-bat-cooled", .h = BD_IRQ_HND(HOT_RES) },
> - { .n = "bd70528-bat-hot", .h = BD_IRQ_HND(HOT_DET) },
> - { .n = "bd70528-chg-tshd", .h = BD_IRQ_HND(CHG_TSD) },
> - { .n = "bd70528-bat-removed", .h = BD_IRQ_HND(BAT_RMV) },
> - { .n = "bd70528-bat-detected", .h = BD_IRQ_HND(BAT_DET) },
> - { .n = "bd70528-dcin2-ov-res", .h = BD_IRQ_HND(DCIN2_OV_RES) },
> - { .n = "bd70528-dcin2-ov-det", .h = BD_IRQ_HND(DCIN2_OV_DET) },
> - { .n = "bd70528-dcin2-removed", .h = BD_IRQ_HND(DCIN2_RMV) },
> - { .n = "bd70528-dcin2-detected", .h = BD_IRQ_HND(DCIN2_DET) },
> - { .n = "bd70528-dcin1-removed", .h = BD_IRQ_HND(DCIN1_RMV) },
> - { .n = "bd70528-dcin1-detected", .h = BD_IRQ_HND(DCIN1_DET) },
> - };
> -
> - for (i = 0; i < ARRAY_SIZE(bd70528_chg_irqs); i++) {
> - irq = platform_get_irq_byname(pdev, bd70528_chg_irqs[i].n);
> - if (irq < 0) {
> - dev_err(&pdev->dev, "Bad IRQ information for %s (%d)\n",
> - bd70528_chg_irqs[i].n, irq);
> - return irq;
> - }
> - ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
> - bd70528_chg_irqs[i].h,
> - IRQF_ONESHOT,
> - bd70528_chg_irqs[i].n,
> - bdpsy->psy);
> -
> - if (ret)
> - return ret;
> - }
> - /*
> - * BD70528 irq controller is not touching the main mask register.
> - * So enable the charger block interrupts at main level. We can just
> - * leave them enabled as irq-controller should disable irqs
> - * from sub-registers when IRQ is disabled or freed.
> - */
> - mask = BD70528_REG_INT_BAT1_MASK | BD70528_REG_INT_BAT2_MASK;
> - ret = regmap_update_bits(bdpsy->regmap,
> - BD70528_REG_INT_MAIN_MASK, mask, 0);
> - if (ret)
> - dev_err(&pdev->dev, "Failed to enable charger IRQs\n");
> -
> - return ret;
> -}
> -
> -static int bd70528_get_charger_status(struct bd70528_psy *bdpsy, int *val)
> -{
> - int ret;
> - unsigned int v;
> -
> - ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_CURR_STAT, &v);
> - if (ret) {
> - dev_err(bdpsy->dev, "Charger state read failure %d\n",
> - ret);
> - return ret;
> - }
> -
> - switch (v & BD70528_MASK_CHG_STAT) {
> - case CHG_STAT_SUSPEND:
> - /* Maybe we should check the CHG_TTRI_EN? */
> - case CHG_STAT_OTP_TRICKLE:
> - case CHG_STAT_OTP_FAST:
> - case CHG_STAT_OTP_DONE:
> - case CHG_STAT_TSD_TRICKLE:
> - case CHG_STAT_TSD_FAST:
> - case CHG_STAT_TSD_TOPOFF:
> - case CHG_STAT_BAT_ERR:
> - *val = POWER_SUPPLY_STATUS_NOT_CHARGING;
> - break;
> - case CHG_STAT_DONE:
> - *val = POWER_SUPPLY_STATUS_FULL;
> - break;
> - case CHG_STAT_TRICKLE:
> - case CHG_STAT_FAST:
> - case CHG_STAT_TOPOFF:
> - *val = POWER_SUPPLY_STATUS_CHARGING;
> - break;
> - default:
> - *val = POWER_SUPPLY_STATUS_UNKNOWN;
> - break;
> - }
> -
> - return 0;
> -}
> -
> -static int bd70528_get_charge_type(struct bd70528_psy *bdpsy, int *val)
> -{
> - int ret;
> - unsigned int v;
> -
> - ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_CURR_STAT, &v);
> - if (ret) {
> - dev_err(bdpsy->dev, "Charger state read failure %d\n",
> - ret);
> - return ret;
> - }
> -
> - switch (v & BD70528_MASK_CHG_STAT) {
> - case CHG_STAT_TRICKLE:
> - *val = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
> - break;
> - case CHG_STAT_FAST:
> - case CHG_STAT_TOPOFF:
> - *val = POWER_SUPPLY_CHARGE_TYPE_FAST;
> - break;
> - case CHG_STAT_DONE:
> - case CHG_STAT_SUSPEND:
> - /* Maybe we should check the CHG_TTRI_EN? */
> - case CHG_STAT_OTP_TRICKLE:
> - case CHG_STAT_OTP_FAST:
> - case CHG_STAT_OTP_DONE:
> - case CHG_STAT_TSD_TRICKLE:
> - case CHG_STAT_TSD_FAST:
> - case CHG_STAT_TSD_TOPOFF:
> - case CHG_STAT_BAT_ERR:
> - *val = POWER_SUPPLY_CHARGE_TYPE_NONE;
> - break;
> - default:
> - *val = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
> - break;
> - }
> -
> - return 0;
> -}
> -
> -static int bd70528_get_battery_health(struct bd70528_psy *bdpsy, int *val)
> -{
> - int ret;
> - unsigned int v;
> -
> - ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_BAT_STAT, &v);
> - if (ret) {
> - dev_err(bdpsy->dev, "Battery state read failure %d\n",
> - ret);
> - return ret;
> - }
> - /* No battery? */
> - if (!(v & BD70528_MASK_CHG_BAT_DETECT))
> - *val = POWER_SUPPLY_HEALTH_DEAD;
> - else if (v & BD70528_MASK_CHG_BAT_OVERVOLT)
> - *val = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
> - else if (v & BD70528_MASK_CHG_BAT_TIMER)
> - *val = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
> - else
> - *val = POWER_SUPPLY_HEALTH_GOOD;
> -
> - return 0;
> -}
> -
> -static int bd70528_get_online(struct bd70528_psy *bdpsy, int *val)
> -{
> - int ret;
> - unsigned int v;
> -
> - ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_IN_STAT, &v);
> - if (ret) {
> - dev_err(bdpsy->dev, "DC1 IN state read failure %d\n",
> - ret);
> - return ret;
> - }
> -
> - *val = (v & BD70528_MASK_CHG_DCIN1_UVLO) ? 1 : 0;
> -
> - return 0;
> -}
> -
> -static int bd70528_get_present(struct bd70528_psy *bdpsy, int *val)
> -{
> - int ret;
> - unsigned int v;
> -
> - ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_BAT_STAT, &v);
> - if (ret) {
> - dev_err(bdpsy->dev, "Battery state read failure %d\n",
> - ret);
> - return ret;
> - }
> -
> - *val = (v & BD70528_MASK_CHG_BAT_DETECT) ? 1 : 0;
> -
> - return 0;
> -}
> -
> -static const struct linear_range current_limit_ranges[] = {
> - {
> - .min = 5,
> - .step = 1,
> - .min_sel = 0,
> - .max_sel = 0x22,
> - },
> - {
> - .min = 40,
> - .step = 5,
> - .min_sel = 0x23,
> - .max_sel = 0x26,
> - },
> - {
> - .min = 60,
> - .step = 20,
> - .min_sel = 0x27,
> - .max_sel = 0x2d,
> - },
> - {
> - .min = 200,
> - .step = 50,
> - .min_sel = 0x2e,
> - .max_sel = 0x34,
> - },
> - {
> - .min = 500,
> - .step = 0,
> - .min_sel = 0x35,
> - .max_sel = 0x3f,
> - },
> -};
> -
> -/*
> - * BD70528 would support setting and getting own charge current/
> - * voltage for low temperatures. The driver currently only reads
> - * the charge current at room temperature. We do set both though.
> - */
> -static const struct linear_range warm_charge_curr[] = {
> - {
> - .min = 10,
> - .step = 10,
> - .min_sel = 0,
> - .max_sel = 0x12,
> - },
> - {
> - .min = 200,
> - .step = 25,
> - .min_sel = 0x13,
> - .max_sel = 0x1f,
> - },
> -};
> -
> -/*
> - * Cold charge current selectors are identical to warm charge current
> - * selectors. The difference is that only smaller currents are available
> - * at cold charge range.
> - */
> -#define MAX_COLD_CHG_CURR_SEL 0x15
> -#define MAX_WARM_CHG_CURR_SEL 0x1f
> -#define MIN_CHG_CURR_SEL 0x0
> -
> -static int get_charge_current(struct bd70528_psy *bdpsy, int *ma)
> -{
> - unsigned int sel;
> - int ret;
> -
> - ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_CHG_CURR_WARM,
> - &sel);
> - if (ret) {
> - dev_err(bdpsy->dev,
> - "Charge current reading failed (%d)\n", ret);
> - return ret;
> - }
> -
> - sel &= BD70528_MASK_CHG_CHG_CURR;
> -
> - ret = linear_range_get_value_array(&warm_charge_curr[0],
> - ARRAY_SIZE(warm_charge_curr),
> - sel, ma);
> - if (ret) {
> - dev_err(bdpsy->dev,
> - "Unknown charge current value 0x%x\n",
> - sel);
> - }
> -
> - return ret;
> -}
> -
> -static int get_current_limit(struct bd70528_psy *bdpsy, int *ma)
> -{
> - unsigned int sel;
> - int ret;
> -
> - ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_DCIN_ILIM,
> - &sel);
> -
> - if (ret) {
> - dev_err(bdpsy->dev,
> - "Input current limit reading failed (%d)\n", ret);
> - return ret;
> - }
> -
> - sel &= BD70528_MASK_CHG_DCIN_ILIM;
> -
> - ret = linear_range_get_value_array(&current_limit_ranges[0],
> - ARRAY_SIZE(current_limit_ranges),
> - sel, ma);
> - if (ret) {
> - /* Unspecified values mean 500 mA */
> - *ma = 500;
> - }
> - return 0;
> -}
> -
> -static enum power_supply_property bd70528_charger_props[] = {
> - POWER_SUPPLY_PROP_STATUS,
> - POWER_SUPPLY_PROP_CHARGE_TYPE,
> - POWER_SUPPLY_PROP_HEALTH,
> - POWER_SUPPLY_PROP_PRESENT,
> - POWER_SUPPLY_PROP_ONLINE,
> - POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
> - POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
> - POWER_SUPPLY_PROP_MODEL_NAME,
> - POWER_SUPPLY_PROP_MANUFACTURER,
> -};
> -
> -static int bd70528_charger_get_property(struct power_supply *psy,
> - enum power_supply_property psp,
> - union power_supply_propval *val)
> -{
> - struct bd70528_psy *bdpsy = power_supply_get_drvdata(psy);
> - int ret = 0;
> -
> - switch (psp) {
> - case POWER_SUPPLY_PROP_STATUS:
> - return bd70528_get_charger_status(bdpsy, &val->intval);
> - case POWER_SUPPLY_PROP_CHARGE_TYPE:
> - return bd70528_get_charge_type(bdpsy, &val->intval);
> - case POWER_SUPPLY_PROP_HEALTH:
> - return bd70528_get_battery_health(bdpsy, &val->intval);
> - case POWER_SUPPLY_PROP_PRESENT:
> - return bd70528_get_present(bdpsy, &val->intval);
> - case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> - ret = get_current_limit(bdpsy, &val->intval);
> - val->intval *= 1000;
> - return ret;
> - case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> - ret = get_charge_current(bdpsy, &val->intval);
> - val->intval *= 1000;
> - return ret;
> - case POWER_SUPPLY_PROP_ONLINE:
> - return bd70528_get_online(bdpsy, &val->intval);
> - case POWER_SUPPLY_PROP_MODEL_NAME:
> - val->strval = bd70528_charger_model;
> - return 0;
> - case POWER_SUPPLY_PROP_MANUFACTURER:
> - val->strval = bd70528_charger_manufacturer;
> - return 0;
> - default:
> - break;
> - }
> -
> - return -EINVAL;
> -}
> -
> -static int bd70528_prop_is_writable(struct power_supply *psy,
> - enum power_supply_property psp)
> -{
> - switch (psp) {
> - case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> - case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> - return 1;
> - default:
> - break;
> - }
> - return 0;
> -}
> -
> -static int set_charge_current(struct bd70528_psy *bdpsy, int ma)
> -{
> - unsigned int reg;
> - int ret = 0, tmpret;
> - bool found;
> -
> - if (ma > 500) {
> - dev_warn(bdpsy->dev,
> - "Requested charge current %u exceed maximum (500mA)\n",
> - ma);
> - reg = MAX_WARM_CHG_CURR_SEL;
> - goto set;
> - }
> - if (ma < 10) {
> - dev_err(bdpsy->dev,
> - "Requested charge current %u smaller than min (10mA)\n",
> - ma);
> - reg = MIN_CHG_CURR_SEL;
> - ret = -EINVAL;
> - goto set;
> - }
> -
> -/*
> - * For BD70528 voltage/current limits we happily accept any value which
> - * belongs the range. We could check if value matching the selector is
> - * desired by computing the range min + (sel - sel_low) * range step - but
> - * I guess it is enough if we use voltage/current which is closest (below)
> - * the requested?
> - */
> -
> - ret = linear_range_get_selector_low_array(warm_charge_curr,
> - ARRAY_SIZE(warm_charge_curr),
> - ma, &reg, &found);
> - if (ret) {
> - dev_err(bdpsy->dev,
> - "Unsupported charge current %u mA\n", ma);
> - reg = MIN_CHG_CURR_SEL;
> - goto set;
> - }
> - if (!found) {
> - /*
> - * There was a gap in supported values and we hit it.
> - * Yet a smaller value was found so we use it.
> - */
> - dev_warn(bdpsy->dev,
> - "Unsupported charge current %u mA\n", ma);
> - }
> -set:
> -
> - tmpret = regmap_update_bits(bdpsy->regmap,
> - BD70528_REG_CHG_CHG_CURR_WARM,
> - BD70528_MASK_CHG_CHG_CURR, reg);
> - if (tmpret)
> - dev_err(bdpsy->dev,
> - "Charge current write failure (%d)\n", tmpret);
> -
> - if (reg > MAX_COLD_CHG_CURR_SEL)
> - reg = MAX_COLD_CHG_CURR_SEL;
> -
> - if (!tmpret)
> - tmpret = regmap_update_bits(bdpsy->regmap,
> - BD70528_REG_CHG_CHG_CURR_COLD,
> - BD70528_MASK_CHG_CHG_CURR, reg);
> -
> - if (!ret)
> - ret = tmpret;
> -
> - return ret;
> -}
> -
> -#define MAX_CURR_LIMIT_SEL 0x34
> -#define MIN_CURR_LIMIT_SEL 0x0
> -
> -static int set_current_limit(struct bd70528_psy *bdpsy, int ma)
> -{
> - unsigned int reg;
> - int ret = 0, tmpret;
> - bool found;
> -
> - if (ma > 500) {
> - dev_warn(bdpsy->dev,
> - "Requested current limit %u exceed maximum (500mA)\n",
> - ma);
> - reg = MAX_CURR_LIMIT_SEL;
> - goto set;
> - }
> - if (ma < 5) {
> - dev_err(bdpsy->dev,
> - "Requested current limit %u smaller than min (5mA)\n",
> - ma);
> - reg = MIN_CURR_LIMIT_SEL;
> - ret = -EINVAL;
> - goto set;
> - }
> -
> - ret = linear_range_get_selector_low_array(current_limit_ranges,
> - ARRAY_SIZE(current_limit_ranges),
> - ma, &reg, &found);
> - if (ret) {
> - dev_err(bdpsy->dev, "Unsupported current limit %umA\n", ma);
> - reg = MIN_CURR_LIMIT_SEL;
> - goto set;
> - }
> - if (!found) {
> - /*
> - * There was a gap in supported values and we hit it.
> - * We found a smaller value from ranges and use it.
> - * Warn user though.
> - */
> - dev_warn(bdpsy->dev, "Unsupported current limit %umA\n", ma);
> - }
> -
> -set:
> - tmpret = regmap_update_bits(bdpsy->regmap,
> - BD70528_REG_CHG_DCIN_ILIM,
> - BD70528_MASK_CHG_DCIN_ILIM, reg);
> -
> - if (!ret)
> - ret = tmpret;
> -
> - return ret;
> -}
> -
> -static int bd70528_charger_set_property(struct power_supply *psy,
> - enum power_supply_property psp,
> - const union power_supply_propval *val)
> -{
> - struct bd70528_psy *bdpsy = power_supply_get_drvdata(psy);
> -
> - switch (psp) {
> - case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> - return set_current_limit(bdpsy, val->intval / 1000);
> - case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> - return set_charge_current(bdpsy, val->intval / 1000);
> - default:
> - break;
> - }
> - return -EINVAL;
> -}
> -
> -static const struct power_supply_desc bd70528_charger_desc = {
> - .name = "bd70528-charger",
> - .type = POWER_SUPPLY_TYPE_MAINS,
> - .properties = bd70528_charger_props,
> - .num_properties = ARRAY_SIZE(bd70528_charger_props),
> - .get_property = bd70528_charger_get_property,
> - .set_property = bd70528_charger_set_property,
> - .property_is_writeable = bd70528_prop_is_writable,
> -};
> -
> -static int bd70528_power_probe(struct platform_device *pdev)
> -{
> - struct bd70528_psy *bdpsy;
> - struct power_supply_config cfg = {};
> -
> - bdpsy = devm_kzalloc(&pdev->dev, sizeof(*bdpsy), GFP_KERNEL);
> - if (!bdpsy)
> - return -ENOMEM;
> -
> - bdpsy->regmap = dev_get_regmap(pdev->dev.parent, NULL);
> - if (!bdpsy->regmap) {
> - dev_err(&pdev->dev, "No regmap found for chip\n");
> - return -EINVAL;
> - }
> - bdpsy->dev = &pdev->dev;
> -
> - platform_set_drvdata(pdev, bdpsy);
> - cfg.drv_data = bdpsy;
> - cfg.of_node = pdev->dev.parent->of_node;
> -
> - bdpsy->psy = devm_power_supply_register(&pdev->dev,
> - &bd70528_charger_desc, &cfg);
> - if (IS_ERR(bdpsy->psy)) {
> - dev_err(&pdev->dev, "failed: power supply register\n");
> - return PTR_ERR(bdpsy->psy);
> - }
> -
> - return bd70528_get_irqs(pdev, bdpsy);
> -}
> -
> -static struct platform_driver bd70528_power = {
> - .driver = {
> - .name = "bd70528-power"
> - },
> - .probe = bd70528_power_probe,
> -};
> -
> -module_platform_driver(bd70528_power);
> -
> -MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>");
> -MODULE_DESCRIPTION("BD70528 power-supply driver");
> -MODULE_LICENSE("GPL");
> -MODULE_ALIAS("platform:bd70528-power");
> --
> 2.25.4
>
>
> --
> Matti Vaittinen, Linux device drivers
> ROHM Semiconductors, Finland SWDC
> Kiviharjunlenkki 1E
> 90220 OULU
> FINLAND
>
> ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
> Simon says - in Latin please.
> ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
> Thanks to Simon Glass for the translation =]


Attachment: signature.asc
Description: PGP signature