Re: [PATCH v4 4/6] reset: Add Delta TN48M CPLD reset controller

[Philipp Zabel]

Hi Robert,

On Wed, 2021-06-02 at 14:24 +0200, Robert Marko wrote:
> Delta TN48M CPLD exposes resets for the following:
> * 88F7040 SoC
> * 88F6820 SoC
> * 98DX3265 switch MAC-s
> * 88E1680 PHY-s
> * 88E1512 PHY
> * PoE PSE controller
> 
> Controller supports only self clearing resets.
> 
> Signed-off-by: Robert Marko <robert.marko@xxxxxxxxxx>
> ---
>  drivers/reset/Kconfig       |   9 +++
>  drivers/reset/Makefile      |   1 +
>  drivers/reset/reset-tn48m.c | 128 ++++++++++++++++++++++++++++++++++++
>  3 files changed, 138 insertions(+)
>  create mode 100644 drivers/reset/reset-tn48m.c
> 
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 4171c6f76385..14e179cda58c 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -237,6 +237,15 @@ config RESET_TI_SYSCON
>  	  you wish to use the reset framework for such memory-mapped devices,
>  	  say Y here. Otherwise, say N.
>  
> +config RESET_TN48M_CPLD
> +	tristate "Delta Networks TN48M switch CPLD reset controller"
> +	depends on MFD_TN48M_CPLD

Let's make this

	depends on MFD_TN48M_CPLD || COMPILE_TEST
	default MFD_TN48M_CPLD

unless there is a reason not to enable the reset driver by default when
the MFD driver is activated.

Reviewed-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>

regards
Philipp