[PATCH 1/5] scsi: hisi_sas: Put a limit of link reset retries

[John Garry]

From: Luo Jiaxing <luojiaxing@xxxxxxxxxx>

If an OOB event is received but the phy still fails to come up, a link
reset will be issued repeatedly at an interval of 20s until the phy comes
up.

Set a limit for link reset issue retries to avoid printing the timeout
message endlessly.

Signed-off-by: Luo Jiaxing <luojiaxing@xxxxxxxxxx>
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
---
 drivers/scsi/hisi_sas/hisi_sas.h      |  1 +
 drivers/scsi/hisi_sas/hisi_sas_main.c | 15 +++++++++++++--
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index cf879cc59e4c..8e36ede12cf1 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -185,6 +185,7 @@ struct hisi_sas_phy {
 	enum sas_linkrate	minimum_linkrate;
 	enum sas_linkrate	maximum_linkrate;
 	int enable;
+	int wait_phyup_cnt;
 	atomic_t down_cnt;
 
 	/* Trace FIFO */
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 5a204074099c..50420741fc81 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -857,6 +857,7 @@ static void hisi_sas_phyup_work(struct work_struct *work)
 	struct asd_sas_phy *sas_phy = &phy->sas_phy;
 	int phy_no = sas_phy->id;
 
+	phy->wait_phyup_cnt = 0;
 	if (phy->identify.target_port_protocols == SAS_PROTOCOL_SSP)
 		hisi_hba->hw->sl_notify_ssp(hisi_hba, phy_no);
 	hisi_sas_bytes_dmaed(hisi_hba, phy_no, GFP_KERNEL);
@@ -899,6 +900,8 @@ static void hisi_sas_wait_phyup_timedout(struct timer_list *t)
 	hisi_sas_notify_phy_event(phy, HISI_PHYE_LINK_RESET);
 }
 
+#define HISI_SAS_WAIT_PHYUP_RETRIES	10
+
 void hisi_sas_phy_oob_ready(struct hisi_hba *hisi_hba, int phy_no)
 {
 	struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
@@ -909,8 +912,16 @@ void hisi_sas_phy_oob_ready(struct hisi_hba *hisi_hba, int phy_no)
 		return;
 
 	if (!timer_pending(&phy->timer)) {
-		phy->timer.expires = jiffies + HISI_SAS_WAIT_PHYUP_TIMEOUT * HZ;
-		add_timer(&phy->timer);
+		if (phy->wait_phyup_cnt < HISI_SAS_WAIT_PHYUP_RETRIES) {
+			phy->wait_phyup_cnt++;
+			phy->timer.expires = jiffies +
+					     HISI_SAS_WAIT_PHYUP_TIMEOUT * HZ;
+			add_timer(&phy->timer);
+		} else {
+			dev_warn(dev, "phy%d failed to come up %d times, giving up\n",
+				 phy_no, phy->wait_phyup_cnt);
+			phy->wait_phyup_cnt = 0;
+		}
 	}
 }
 EXPORT_SYMBOL_GPL(hisi_sas_phy_oob_ready);
-- 
2.26.2