[PATCH] regulator: bd71815: Get rid of struct bd71815_pmic
From: Axel Lin
Date: Mon Jun 07 2021 - 10:30:15 EST
The content of bd71815_regulators is never changed, no need to duplicate
it, thus remove descs[BD71815_REGULATOR_CNT].
The *regmap, *dev and *rdev[BD71815_REGULATOR_CNT] are not really needed.
The *gps is unused.
Thus the struct bd71815_pmic can be removed.
Signed-off-by: Axel Lin <axel.lin@xxxxxxxxxx>
---
drivers/regulator/bd71815-regulator.c | 57 +++++++++------------------
1 file changed, 19 insertions(+), 38 deletions(-)
diff --git a/drivers/regulator/bd71815-regulator.c b/drivers/regulator/bd71815-regulator.c
index 4dd21ac24ddf..16edd9062ca9 100644
--- a/drivers/regulator/bd71815-regulator.c
+++ b/drivers/regulator/bd71815-regulator.c
@@ -28,14 +28,6 @@ struct bd71815_regulator {
const struct rohm_dvs_config *dvs;
};
-struct bd71815_pmic {
- struct bd71815_regulator descs[BD71815_REGULATOR_CNT];
- struct regmap *regmap;
- struct device *dev;
- struct gpio_descs *gps;
- struct regulator_dev *rdev[BD71815_REGULATOR_CNT];
-};
-
static const int bd7181x_wled_currents[] = {
10, 20, 30, 50, 70, 100, 200, 300, 500, 700, 1000, 2000, 3000, 4000,
5000, 6000, 7000, 8000, 9000, 10000, 11000, 12000, 13000, 14000, 15000,
@@ -302,14 +294,13 @@ static int bd7181x_led_set_current_limit(struct regulator_dev *rdev,
static int bd7181x_buck12_get_voltage_sel(struct regulator_dev *rdev)
{
- struct bd71815_pmic *pmic = rdev_get_drvdata(rdev);
int rid = rdev_get_id(rdev);
int ret, regh, regl, val;
regh = BD71815_REG_BUCK1_VOLT_H + rid * 0x2;
regl = BD71815_REG_BUCK1_VOLT_L + rid * 0x2;
- ret = regmap_read(pmic->regmap, regh, &val);
+ ret = regmap_read(rdev->regmap, regh, &val);
if (ret)
return ret;
@@ -321,7 +312,7 @@ static int bd7181x_buck12_get_voltage_sel(struct regulator_dev *rdev)
* by BD71815_BUCK_DVSSEL bit
*/
if ((!(val & BD71815_BUCK_STBY_DVS)) && (!(val & BD71815_BUCK_DVSSEL)))
- ret = regmap_read(pmic->regmap, regl, &val);
+ ret = regmap_read(rdev->regmap, regl, &val);
if (ret)
return ret;
@@ -335,14 +326,13 @@ static int bd7181x_buck12_get_voltage_sel(struct regulator_dev *rdev)
static int bd7181x_buck12_set_voltage_sel(struct regulator_dev *rdev,
unsigned int sel)
{
- struct bd71815_pmic *pmic = rdev_get_drvdata(rdev);
int rid = rdev_get_id(rdev);
int ret, val, reg, regh, regl;
regh = BD71815_REG_BUCK1_VOLT_H + rid*0x2;
regl = BD71815_REG_BUCK1_VOLT_L + rid*0x2;
- ret = regmap_read(pmic->regmap, regh, &val);
+ ret = regmap_read(rdev->regmap, regh, &val);
if (ret)
return ret;
@@ -352,7 +342,7 @@ static int bd7181x_buck12_set_voltage_sel(struct regulator_dev *rdev,
* voltages at runtime is not supported by this driver.
*/
if (((val & BD71815_BUCK_STBY_DVS))) {
- return regmap_update_bits(pmic->regmap, regh, BD71815_VOLT_MASK,
+ return regmap_update_bits(rdev->regmap, regh, BD71815_VOLT_MASK,
sel);
}
/* Update new voltage to the register which is not selected now */
@@ -361,12 +351,13 @@ static int bd7181x_buck12_set_voltage_sel(struct regulator_dev *rdev,
else
reg = regh;
- ret = regmap_update_bits(pmic->regmap, reg, BD71815_VOLT_MASK, sel);
+ ret = regmap_update_bits(rdev->regmap, reg, BD71815_VOLT_MASK, sel);
if (ret)
return ret;
/* Select the other DVS register to be used */
- return regmap_update_bits(pmic->regmap, regh, BD71815_BUCK_DVSSEL, ~val);
+ return regmap_update_bits(rdev->regmap, regh, BD71815_BUCK_DVSSEL,
+ ~val);
}
static const struct regulator_ops bd7181x_ldo_regulator_ops = {
@@ -524,7 +515,7 @@ static const struct regulator_ops bd7181x_led_regulator_ops = {
.dvs = (_dvs), \
}
-static struct bd71815_regulator bd71815_regulators[] = {
+static const struct bd71815_regulator bd71815_regulators[] = {
BD71815_BUCK12_REG(buck1, BD71815_BUCK1, BD71815_REG_BUCK1_VOLT_H,
BD71815_REG_BUCK1_MODE, 800000, 2000000, 25000,
&buck1_dvs),
@@ -570,24 +561,16 @@ static struct bd71815_regulator bd71815_regulators[] = {
static int bd7181x_probe(struct platform_device *pdev)
{
- struct bd71815_pmic *pmic;
struct regulator_config config = {};
int i, ret;
struct gpio_desc *ldo4_en;
+ struct regmap *regmap;
- pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
- if (!pmic)
- return -ENOMEM;
-
- memcpy(pmic->descs, bd71815_regulators, sizeof(pmic->descs));
-
- pmic->dev = &pdev->dev;
- pmic->regmap = dev_get_regmap(pdev->dev.parent, NULL);
- if (!pmic->regmap) {
- dev_err(pmic->dev, "No parent regmap\n");
+ regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!regmap) {
+ dev_err(&pdev->dev, "No parent regmap\n");
return -ENODEV;
}
- platform_set_drvdata(pdev, pmic);
ldo4_en = devm_gpiod_get_from_of_node(&pdev->dev,
pdev->dev.parent->of_node,
"rohm,vsel-gpios", 0,
@@ -601,23 +584,23 @@ static int bd7181x_probe(struct platform_device *pdev)
}
/* Disable to go to ship-mode */
- ret = regmap_update_bits(pmic->regmap, BD71815_REG_PWRCTRL,
- RESTARTEN, 0);
+ ret = regmap_update_bits(regmap, BD71815_REG_PWRCTRL, RESTARTEN, 0);
if (ret)
return ret;
config.dev = pdev->dev.parent;
- config.regmap = pmic->regmap;
+ config.regmap = regmap;
for (i = 0; i < BD71815_REGULATOR_CNT; i++) {
- struct regulator_desc *desc;
+ const struct regulator_desc *desc;
struct regulator_dev *rdev;
- desc = &pmic->descs[i].desc;
+ desc = &bd71815_regulators[i].desc;
+
if (i == BD71815_LDO4)
config.ena_gpiod = ldo4_en;
-
- config.driver_data = pmic;
+ else
+ config.ena_gpiod = NULL;
rdev = devm_regulator_register(&pdev->dev, desc, &config);
if (IS_ERR(rdev)) {
@@ -626,8 +609,6 @@ static int bd7181x_probe(struct platform_device *pdev)
desc->name);
return PTR_ERR(rdev);
}
- config.ena_gpiod = NULL;
- pmic->rdev[i] = rdev;
}
return 0;
}
--
2.25.1