[PATCH 1/1] lib: Fix spelling mistakes in header files
From: Zhen Lei
Date: Mon Jun 07 2021 - 22:21:47 EST
Fix some spelling mistakes in comments found by "codespell":
Hoever ==> However
poiter ==> pointer
representaion ==> representation
uppon ==> upon
independend ==> independent
aquired ==> acquired
mis-match ==> mismatch
scrach ==> scratch
struture ==> structure
Analagous ==> Analogous
interation ==> iteration
Signed-off-by: Zhen Lei <thunder.leizhen@xxxxxxxxxx>
---
include/linux/bootconfig.h | 2 +-
include/linux/cpumask.h | 2 +-
include/linux/debugobjects.h | 2 +-
include/linux/lru_cache.h | 8 ++++----
include/linux/nodemask.h | 6 +++---
include/linux/percpu-refcount.h | 2 +-
include/linux/scatterlist.h | 2 +-
7 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/include/linux/bootconfig.h b/include/linux/bootconfig.h
index 2696eb0fc149..3dc0b7ed4b58 100644
--- a/include/linux/bootconfig.h
+++ b/include/linux/bootconfig.h
@@ -165,7 +165,7 @@ static inline struct xbc_node * __init xbc_find_node(const char *key)
* is stroed to @anode and @value. If the @node doesn't have @key node,
* it does nothing.
* Note that even if the found key node has only one value (not array)
- * this executes block once. Hoever, if the found key node has no value
+ * this executes block once. However, if the found key node has no value
* (key-only node), this does nothing. So don't use this for testing the
* key-value pair existence.
*/
diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index bfc4690de4f4..f3689a52bfd0 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -259,7 +259,7 @@ extern int cpumask_next_wrap(int n, const struct cpumask *mask, int start, bool
/**
* for_each_cpu_wrap - iterate over every cpu in a mask, starting at a specified location
* @cpu: the (optionally unsigned) integer iterator
- * @mask: the cpumask poiter
+ * @mask: the cpumask pointer
* @start: the start location
*
* The implementation does not assume any bit in @mask is set (including @start).
diff --git a/include/linux/debugobjects.h b/include/linux/debugobjects.h
index 8d2dde23e9fb..32444686b6ff 100644
--- a/include/linux/debugobjects.h
+++ b/include/linux/debugobjects.h
@@ -18,7 +18,7 @@ enum debug_obj_state {
struct debug_obj_descr;
/**
- * struct debug_obj - representaion of an tracked object
+ * struct debug_obj - representation of an tracked object
* @node: hlist node to link the object into the tracker list
* @state: tracked object state
* @astate: current active state
diff --git a/include/linux/lru_cache.h b/include/linux/lru_cache.h
index 429d67d815ce..f65c6734be3c 100644
--- a/include/linux/lru_cache.h
+++ b/include/linux/lru_cache.h
@@ -32,7 +32,7 @@ This header file (and its .c file; kernel-doc of functions see there)
Because of this later property, it is called "lru_cache".
As it actually Tracks Objects in an Active SeT, we could also call it
toast (incidentally that is what may happen to the data on the
- backend storage uppon next resync, if we don't get it right).
+ backend storage upon next resync, if we don't get it right).
What for?
@@ -152,7 +152,7 @@ struct lc_element {
* for paranoia, and for "lc_element_to_index" */
unsigned lc_index;
/* if we want to track a larger set of objects,
- * it needs to become arch independend u64 */
+ * it needs to become arch independent u64 */
unsigned lc_number;
/* special label when on free list */
#define LC_FREE (~0U)
@@ -263,7 +263,7 @@ extern void lc_seq_dump_details(struct seq_file *seq, struct lru_cache *lc, char
*
* Allows (expects) the set to be "dirty". Note that the reference counts and
* order on the active and lru lists may still change. Used to serialize
- * changing transactions. Returns true if we aquired the lock.
+ * changing transactions. Returns true if we acquired the lock.
*/
static inline int lc_try_lock_for_transaction(struct lru_cache *lc)
{
@@ -275,7 +275,7 @@ static inline int lc_try_lock_for_transaction(struct lru_cache *lc)
* @lc: the lru cache to operate on
*
* Note that the reference counts and order on the active and lru lists may
- * still change. Only works on a "clean" set. Returns true if we aquired the
+ * still change. Only works on a "clean" set. Returns true if we acquired the
* lock, which means there are no pending changes, and any further attempt to
* change the set will not succeed until the next lc_unlock().
*/
diff --git a/include/linux/nodemask.h b/include/linux/nodemask.h
index ac398e143c9a..cfa21b78b8d5 100644
--- a/include/linux/nodemask.h
+++ b/include/linux/nodemask.h
@@ -119,7 +119,7 @@ static inline const unsigned long *__nodemask_pr_bits(const nodemask_t *m)
* The inline keyword gives the compiler room to decide to inline, or
* not inline a function as it sees best. However, as these functions
* are called in both __init and non-__init functions, if they are not
- * inlined we will end up with a section mis-match error (of the type of
+ * inlined we will end up with a section mismatch error (of the type of
* freeable items not being freed). So we must use __always_inline here
* to fix the problem. If other functions in the future also end up in
* this situation they will also need to be annotated as __always_inline
@@ -515,7 +515,7 @@ static inline int node_random(const nodemask_t *mask)
#define for_each_online_node(node) for_each_node_state(node, N_ONLINE)
/*
- * For nodemask scrach area.
+ * For nodemask scratch area.
* NODEMASK_ALLOC(type, name) allocates an object with a specified type and
* name.
*/
@@ -528,7 +528,7 @@ static inline int node_random(const nodemask_t *mask)
#define NODEMASK_FREE(m) do {} while (0)
#endif
-/* A example struture for using NODEMASK_ALLOC, used in mempolicy. */
+/* A example structure for using NODEMASK_ALLOC, used in mempolicy. */
struct nodemask_scratch {
nodemask_t mask1;
nodemask_t mask2;
diff --git a/include/linux/percpu-refcount.h b/include/linux/percpu-refcount.h
index 16c35a728b4c..ae16a9856305 100644
--- a/include/linux/percpu-refcount.h
+++ b/include/linux/percpu-refcount.h
@@ -213,7 +213,7 @@ static inline void percpu_ref_get_many(struct percpu_ref *ref, unsigned long nr)
* percpu_ref_get - increment a percpu refcount
* @ref: percpu_ref to get
*
- * Analagous to atomic_long_inc().
+ * Analogous to atomic_long_inc().
*
* This function is safe to call as long as @ref is between init and exit.
*/
diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h
index 6f70572b2938..ecf87484814f 100644
--- a/include/linux/scatterlist.h
+++ b/include/linux/scatterlist.h
@@ -474,7 +474,7 @@ sg_page_iter_dma_address(struct sg_dma_page_iter *dma_iter)
* Iterates over sg entries mapping page-by-page. On each successful
* iteration, @miter->page points to the mapped page and
* @miter->length bytes of data can be accessed at @miter->addr. As
- * long as an interation is enclosed between start and stop, the user
+ * long as an iteration is enclosed between start and stop, the user
* is free to choose control structure and when to stop.
*
* @miter->consumed is set to @miter->length on each iteration. It
--
2.25.1