Re: [PATCH v4 3/7] ARM: dts: aspeed-g6: Add SGPIO node.

[Steven Lee]

The 06/08/2021 07:28, Andrew Jeffery wrote:
> On Mon, 7 Jun 2021, at 16:45, Steven Lee wrote:
> > AST2600 supports 2 SGPIO master interfaces one with 128 pins another one
> > with 80 pins.
> > 
> > Signed-off-by: Steven Lee <steven_lee@xxxxxxxxxxxxxx>
> > ---
> >  arch/arm/boot/dts/aspeed-g6.dtsi | 30 ++++++++++++++++++++++++++++++
> >  1 file changed, 30 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
> > index f96607b7b4e2..c09b24824b6d 100644
> > --- a/arch/arm/boot/dts/aspeed-g6.dtsi
> > +++ b/arch/arm/boot/dts/aspeed-g6.dtsi
> > @@ -377,6 +377,36 @@
> >  				#interrupt-cells = <2>;
> >  			};
> >  
> > +			sgpiom0: sgpiom@1e780500 {
> > +				#gpio-cells = <2>;
> > +				gpio-controller;
> > +				compatible = "aspeed,ast2600-sgpiom-128";
> > +				reg = <0x1e780500 0x100>;
> > +				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
> > +				ngpios = <128>;
> 
> Doesn't this affect the way the data is presented on the bus?
> 

I add ngpios in aspeed-g6.dtsi as it can be overridden by dts files and
driver won't return error if users only add status = "okay" in
dts files without adding ngpios property.

I will remove the property from aspeed-g6.dtsi if we don't need a
default value for ngpios.

> My understanding is this should be defined by each platform, not in the dtsi. Having said that, it appears it is specified in aspeed-g5.dtsi (as the value 8?).
> 

I will remove the property from aspeed-g5 in a separate patch.

Thanks,
Steven

> > +				clocks = <&syscon ASPEED_CLK_APB2>;
> > +				interrupt-controller;
> > +				bus-frequency = <12000000>;
> > +				pinctrl-names = "default";
> > +				pinctrl-0 = <&pinctrl_sgpm1_default>;
> > +				status = "disabled";
> > +			};
> > +
> > +			sgpiom1: sgpiom@1e780600 {
> > +				#gpio-cells = <2>;
> > +				gpio-controller;
> > +				compatible = "aspeed,ast2600-sgpiom-80";
> > +				reg = <0x1e780600 0x100>;
> > +				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> > +				ngpios = <80>;
> 
> As above.
> 
> Andrew