Re: [PATCH 2/2] net: stmmac: Add Ingenic SoCs MAC support.

From: Paul Cercueil
Date: Tue Jun 08 2021 - 04:46:48 EST


Hi Zhou,

Le mar., juin 8 2021 at 01:27:47 +0800, 周琰杰 (Zhou Yanjie) <zhouyanjie@xxxxxxxxxxxxxx> a écrit :
Add support for Ingenic SoC MAC glue layer support for the stmmac
device driver. This driver is used on for the MAC ethernet controller
found in the JZ4775 SoC, the X1000 SoC, the X1600 SoC, the X1830 SoC,
and the X2000 SoC.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@xxxxxxxxxxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/Kconfig | 16 +-
drivers/net/ethernet/stmicro/stmmac/Makefile | 1 +
.../net/ethernet/stmicro/stmmac/dwmac-ingenic.c | 367 +++++++++++++++++++++
3 files changed, 382 insertions(+), 2 deletions(-)
create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c

diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 7737e4d0..fb58537 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -66,6 +66,18 @@ config DWMAC_ANARION

This selects the Anarion SoC glue layer support for the stmmac driver.

+config DWMAC_INGENIC
+ tristate "Ingenic MAC support"
+ default MACH_INGENIC
+ depends on OF && HAS_IOMEM && (MACH_INGENIC || COMPILE_TEST)
+ select MFD_SYSCON
+ help
+ Support for ethernet controller on Ingenic SoCs.
+
+ This selects Ingenic SoCs glue layer support for the stmmac
+ device driver. This driver is used on for the Ingenic SoCs
+ MAC ethernet controller.
+
config DWMAC_IPQ806X
tristate "QCA IPQ806x DWMAC support"
default ARCH_QCOM
@@ -129,7 +141,7 @@ config DWMAC_QCOM_ETHQOS

config DWMAC_ROCKCHIP
tristate "Rockchip dwmac support"
- default ARCH_ROCKCHIP
+ default MACH_ROCKCHIP
depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
select MFD_SYSCON
help
@@ -164,7 +176,7 @@ config DWMAC_STI

config DWMAC_STM32
tristate "STM32 DWMAC support"
- default ARCH_STM32
+ default MACH_STM32
depends on OF && HAS_IOMEM && (ARCH_STM32 || COMPILE_TEST)
select MFD_SYSCON
help
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index f2e478b..6471f93 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -14,6 +14,7 @@ stmmac-$(CONFIG_STMMAC_SELFTESTS) += stmmac_selftests.o
# Ordering matters. Generic driver must be last.
obj-$(CONFIG_STMMAC_PLATFORM) += stmmac-platform.o
obj-$(CONFIG_DWMAC_ANARION) += dwmac-anarion.o
+obj-$(CONFIG_DWMAC_INGENIC) += dwmac-ingenic.o
obj-$(CONFIG_DWMAC_IPQ806X) += dwmac-ipq806x.o
obj-$(CONFIG_DWMAC_LPC18XX) += dwmac-lpc18xx.o
obj-$(CONFIG_DWMAC_MEDIATEK) += dwmac-mediatek.o
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c
new file mode 100644
index 00000000..8be8caa
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c
@@ -0,0 +1,367 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dwmac-ingenic.c - Ingenic SoCs DWMAC specific glue layer
+ *
+ * Copyright (c) 2020 周琰杰 (Zhou Yanjie) <zhouyanjie@xxxxxxxxxxxxxx>

2021?

+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_net.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/stmmac.h>
+
+#include "stmmac_platform.h"
+
+#define MACPHYC_TXCLK_SEL_MASK GENMASK(31, 31)
+#define MACPHYC_TXCLK_SEL_OUTPUT 0x1
+#define MACPHYC_TXCLK_SEL_INPUT 0x0
+#define MACPHYC_MODE_SEL_MASK GENMASK(31, 31)
+#define MACPHYC_MODE_SEL_RMII 0x0
+#define MACPHYC_TX_SEL_MASK GENMASK(19, 19)
+#define MACPHYC_TX_SEL_ORIGIN 0x0
+#define MACPHYC_TX_SEL_DELAY 0x1
+#define MACPHYC_TX_DELAY_MASK GENMASK(18, 12)
+#define MACPHYC_TX_DELAY_63_UNIT 0x3e
+#define MACPHYC_RX_SEL_MASK GENMASK(11, 11)
+#define MACPHYC_RX_SEL_ORIGIN 0x0
+#define MACPHYC_RX_SEL_DELAY 0x1
+#define MACPHYC_RX_DELAY_MASK GENMASK(10, 4)
+#define MACPHYC_SOFT_RST_MASK GENMASK(3, 3)
+#define MACPHYC_PHY_INFT_MASK GENMASK(2, 0)
+#define MACPHYC_PHY_INFT_RMII 0x4
+#define MACPHYC_PHY_INFT_RGMII 0x1
+#define MACPHYC_PHY_INFT_GMII 0x0
+#define MACPHYC_PHY_INFT_MII 0x0
+
+enum ingenic_mac_version {
+ ID_JZ4775,
+ ID_X1000,
+ ID_X1600,
+ ID_X1830,
+ ID_X2000,

You could test it on all these? I never heard about the X1600 before.

+};
+
+struct ingenic_mac {
+ const struct ingenic_soc_info *soc_info;
+ struct device *dev;
+ struct regmap *regmap;
+};
+
+struct ingenic_soc_info {
+ enum ingenic_mac_version version;
+ u32 mask;
+
+ int (*set_mode)(struct plat_stmmacenet_data *plat_dat);
+ int (*suspend)(struct ingenic_mac *mac);
+ void (*resume)(struct ingenic_mac *mac);

These suspend/resume callbacks are not used anywhere - just drop them.

+};
+
+static int ingenic_mac_init(struct plat_stmmacenet_data *plat_dat)
+{
+ struct ingenic_mac *mac = plat_dat->bsp_priv;
+ int ret;
+
+ if (mac->soc_info->set_mode) {
+ ret = mac->soc_info->set_mode(plat_dat);
+ if (ret)
+ return ret;
+ }
+
+ return ret;

You are returning an uninitialized variable.

+}
+
+static int jz4775_mac_set_mode(struct plat_stmmacenet_data *plat_dat)
+{
+ struct ingenic_mac *mac = plat_dat->bsp_priv;
+ int val;

unsigned int val;

+
+ switch (plat_dat->interface) {
+ case PHY_INTERFACE_MODE_MII:
+ val = FIELD_PREP(MACPHYC_TXCLK_SEL_MASK, MACPHYC_TXCLK_SEL_INPUT) |
+ FIELD_PREP(MACPHYC_PHY_INFT_MASK, MACPHYC_PHY_INFT_MII);
+ pr_debug("MAC PHY Control Register: PHY_INTERFACE_MODE_MII\n");

Use dev_dbg() with mac->dev, instead of pr_debug().

(Same for all pr_debug() calls below)

+ break;
+
+ case PHY_INTERFACE_MODE_GMII:
+ val = FIELD_PREP(MACPHYC_TXCLK_SEL_MASK, MACPHYC_TXCLK_SEL_INPUT) |
+ FIELD_PREP(MACPHYC_PHY_INFT_MASK, MACPHYC_PHY_INFT_GMII);
+ pr_debug("MAC PHY Control Register: PHY_INTERFACE_MODE_GMII\n");
+ break;
+
+ case PHY_INTERFACE_MODE_RMII:
+ val = FIELD_PREP(MACPHYC_TXCLK_SEL_MASK, MACPHYC_TXCLK_SEL_INPUT) |
+ FIELD_PREP(MACPHYC_PHY_INFT_MASK, MACPHYC_PHY_INFT_RMII);
+ pr_debug("MAC PHY Control Register: PHY_INTERFACE_MODE_RMII\n");
+ break;
+
+ case PHY_INTERFACE_MODE_RGMII:
+ val = FIELD_PREP(MACPHYC_TXCLK_SEL_MASK, MACPHYC_TXCLK_SEL_INPUT) |
+ FIELD_PREP(MACPHYC_PHY_INFT_MASK, MACPHYC_PHY_INFT_RGMII);
+ pr_debug("MAC PHY Control Register: PHY_INTERFACE_MODE_RGMII\n");
+ break;
+
+ default:
+ dev_err(mac->dev, "unsupported interface %d", plat_dat->interface);
+ return -EINVAL;
+ }
+
+ /* Update MAC PHY control register */
+ return regmap_update_bits(mac->regmap, 0, mac->soc_info->mask, val);
+}
+
+static int x1000_mac_set_mode(struct plat_stmmacenet_data *plat_dat)
+{
+ struct ingenic_mac *mac = plat_dat->bsp_priv;
+ int val;
+
+ switch (plat_dat->interface) {
+ case PHY_INTERFACE_MODE_RMII:
+ pr_debug("MAC PHY Control Register: PHY_INTERFACE_MODE_RMII\n");
+ break;
+
+ default:
+ dev_err(mac->dev, "unsupported interface %d", plat_dat->interface);
+ return -EINVAL;
+ }
+
+ /* Update MAC PHY control register */
+ return regmap_update_bits(mac->regmap, 0, mac->soc_info->mask, val);

You're passing 'val', which is an uninitialized variable.

+}
+
+static int x1600_mac_set_mode(struct plat_stmmacenet_data *plat_dat)
+{
+ struct ingenic_mac *mac = plat_dat->bsp_priv;
+ int val;

unsigned int val;

+
+ switch (plat_dat->interface) {
+ case PHY_INTERFACE_MODE_RMII:
+ val = FIELD_PREP(MACPHYC_PHY_INFT_MASK, MACPHYC_PHY_INFT_RMII);
+ pr_debug("MAC PHY Control Register: PHY_INTERFACE_MODE_RMII\n");
+ break;
+
+ default:
+ dev_err(mac->dev, "unsupported interface %d", plat_dat->interface);
+ return -EINVAL;
+ }
+
+ /* Update MAC PHY control register */
+ return regmap_update_bits(mac->regmap, 0, mac->soc_info->mask, val);
+}
+
+static int x1830_mac_set_mode(struct plat_stmmacenet_data *plat_dat)
+{
+ struct ingenic_mac *mac = plat_dat->bsp_priv;
+ int val;

Same here,

+
+ switch (plat_dat->interface) {
+ case PHY_INTERFACE_MODE_RMII:
+ val = FIELD_PREP(MACPHYC_MODE_SEL_MASK, MACPHYC_MODE_SEL_RMII) |
+ FIELD_PREP(MACPHYC_PHY_INFT_MASK, MACPHYC_PHY_INFT_RMII);
+ pr_debug("MAC PHY Control Register: PHY_INTERFACE_MODE_RMII\n");
+ break;
+
+ default:
+ dev_err(mac->dev, "unsupported interface %d", plat_dat->interface);
+ return -EINVAL;
+ }
+
+ /* Update MAC PHY control register */
+ return regmap_update_bits(mac->regmap, 0, mac->soc_info->mask, val);
+}
+
+static int x2000_mac_set_mode(struct plat_stmmacenet_data *plat_dat)
+{
+ struct ingenic_mac *mac = plat_dat->bsp_priv;
+ int val;

Same here.

+
+ switch (plat_dat->interface) {
+ case PHY_INTERFACE_MODE_RMII:
+ val = FIELD_PREP(MACPHYC_TX_SEL_MASK, MACPHYC_TX_SEL_ORIGIN) |
+ FIELD_PREP(MACPHYC_RX_SEL_MASK, MACPHYC_RX_SEL_ORIGIN) |
+ FIELD_PREP(MACPHYC_PHY_INFT_MASK, MACPHYC_PHY_INFT_RMII);
+ pr_debug("MAC PHY Control Register: PHY_INTERFACE_MODE_RMII\n");
+ break;
+
+ case PHY_INTERFACE_MODE_RGMII:
+ val = FIELD_PREP(MACPHYC_TX_SEL_MASK, MACPHYC_TX_SEL_DELAY) |
+ FIELD_PREP(MACPHYC_TX_DELAY_MASK, MACPHYC_TX_DELAY_63_UNIT) |
+ FIELD_PREP(MACPHYC_RX_SEL_MASK, MACPHYC_RX_SEL_ORIGIN) |
+ FIELD_PREP(MACPHYC_PHY_INFT_MASK, MACPHYC_PHY_INFT_RGMII);
+ pr_debug("MAC PHY Control Register: PHY_INTERFACE_MODE_RGMII\n");
+ break;
+
+ default:
+ dev_err(mac->dev, "unsupported interface %d", plat_dat->interface);
+ return -EINVAL;
+ }
+
+ /* Update MAC PHY control register */
+ return regmap_update_bits(mac->regmap, 0, mac->soc_info->mask, val);
+}
+
+static int ingenic_mac_probe(struct platform_device *pdev)
+{
+ struct plat_stmmacenet_data *plat_dat;
+ struct stmmac_resources stmmac_res;
+ struct ingenic_mac *mac;
+ const struct ingenic_soc_info *data;
+ int ret;
+
+ ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+ if (ret)
+ return ret;
+
+ plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
+ if (IS_ERR(plat_dat))
+ return PTR_ERR(plat_dat);
+
+ mac = devm_kzalloc(&pdev->dev, sizeof(*mac), GFP_KERNEL);
+ if (!mac) {
+ ret = -ENOMEM;
+ goto err_remove_config_dt;
+ }
+
+ data = of_device_get_match_data(&pdev->dev);
+ if (!data) {
+ dev_err(&pdev->dev, "no of match data provided\n");
+ ret = -EINVAL;
+ goto err_remove_config_dt;
+ }
+
+ /* Get MAC PHY control register */
+ mac->regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "mode-reg");
+ if (IS_ERR(mac->regmap)) {
+ pr_err("%s: failed to get syscon regmap\n", __func__);

dev_err?

+ goto err_remove_config_dt;
+ }
+
+ mac->soc_info = data;
+ mac->dev = &pdev->dev;
+
+ plat_dat->bsp_priv = mac;
+
+ ret = ingenic_mac_init(plat_dat);
+ if (ret)
+ goto err_remove_config_dt;
+
+ ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+ if (ret)
+ goto err_remove_config_dt;
+
+ return 0;
+
+err_remove_config_dt:
+ stmmac_remove_config_dt(pdev, plat_dat);
+
+ return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP

Remove this #ifdef.

+static int ingenic_mac_suspend(struct device *dev)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ struct ingenic_mac *mac = priv->plat->bsp_priv;
+
+ int ret;
+
+ ret = stmmac_suspend(dev);
+
+ if (mac->soc_info->suspend)
+ ret = mac->soc_info->suspend(mac);
+
+ return ret;
+}
+
+static int ingenic_mac_resume(struct device *dev)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ struct ingenic_mac *mac = priv->plat->bsp_priv;
+ int ret;
+
+ if (mac->soc_info->resume)
+ mac->soc_info->resume(mac);
+
+ ret = ingenic_mac_init(priv->plat);
+ if (ret)
+ return ret;
+
+ ret = stmmac_resume(dev);
+
+ return ret;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(ingenic_mac_pm_ops,
+ ingenic_mac_suspend, ingenic_mac_resume);
+
+static struct ingenic_soc_info jz4775_soc_info = {
+ .version = ID_JZ4775,
+ .mask = MACPHYC_TXCLK_SEL_MASK | MACPHYC_SOFT_RST_MASK | MACPHYC_PHY_INFT_MASK,
+
+ .set_mode = jz4775_mac_set_mode,
+};
+
+static struct ingenic_soc_info x1000_soc_info = {
+ .version = ID_X1000,
+ .mask = MACPHYC_SOFT_RST_MASK,
+
+ .set_mode = x1000_mac_set_mode,
+};
+
+static struct ingenic_soc_info x1600_soc_info = {
+ .version = ID_X1600,
+ .mask = MACPHYC_SOFT_RST_MASK | MACPHYC_PHY_INFT_MASK,
+
+ .set_mode = x1600_mac_set_mode,
+};
+
+static struct ingenic_soc_info x1830_soc_info = {
+ .version = ID_X1830,
+ .mask = MACPHYC_MODE_SEL_MASK | MACPHYC_SOFT_RST_MASK | MACPHYC_PHY_INFT_MASK,
+
+ .set_mode = x1830_mac_set_mode,
+};
+
+static struct ingenic_soc_info x2000_soc_info = {
+ .version = ID_X2000,
+ .mask = MACPHYC_TX_SEL_MASK | MACPHYC_TX_DELAY_MASK | MACPHYC_RX_SEL_MASK |
+ MACPHYC_RX_DELAY_MASK | MACPHYC_SOFT_RST_MASK | MACPHYC_PHY_INFT_MASK,
+
+ .set_mode = x2000_mac_set_mode,
+};
+
+static const struct of_device_id ingenic_mac_of_matches[] = {
+ { .compatible = "ingenic,jz4775-mac", .data = &jz4775_soc_info },
+ { .compatible = "ingenic,x1000-mac", .data = &x1000_soc_info },
+ { .compatible = "ingenic,x1600-mac", .data = &x1600_soc_info },
+ { .compatible = "ingenic,x1830-mac", .data = &x1830_soc_info },
+ { .compatible = "ingenic,x2000-mac", .data = &x2000_soc_info },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ingenic_mac_of_matches);
+
+static struct platform_driver ingenic_mac_driver = {
+ .probe = ingenic_mac_probe,
+ .remove = stmmac_pltfr_remove,
+ .driver = {
+ .name = "ingenic-mac",
+ .pm = &ingenic_mac_pm_ops,

.pm = pm_ptr(&ingenic_mac_pm_ops),

+ .of_match_table = ingenic_mac_of_matches,
+ },
+};
+module_platform_driver(ingenic_mac_driver);
+
+MODULE_AUTHOR("周琰杰 (Zhou Yanjie) <zhouyanjie@xxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Ingenic SoCs DWMAC specific glue layer");
+MODULE_LICENSE("GPL v2");
--
2.7.4


Cheers,
-Paul