[PATCH] qla2xxx: synchronize rport dev_loss_tmo setting

[Daniel Wagner]

From: Hannes Reinecke <hare@xxxxxxx>

Currently, the dev_loss_tmo setting is only ever used for SCSI
devices. This patch reshuffles initialisation such that the SCSI
remote ports are registered before the NVMe ones, allowing the
dev_loss_tmo setting to be synchronized between SCSI and NVMe.

Signed-off-by: Hannes Reinecke <hare@xxxxxxx>
Signed-off-by: Daniel Wagner <dwagner@xxxxxxx>
---
Hi,

This is a followup on

  https://lore.kernel.org/linux-scsi/20210419100014.47144-1-dwagner@xxxxxxx/

Hannes and I started to play with this patch. After a few iterations
on getting the right dev_loss_tmo variables set, it works as
hoped. With this change, it's possible to use the same udev rule for
qla2xxx as we currently use for lpfc driver. And it survived serious
testing sessions.

Thanks,
Daniel

 drivers/scsi/qla2xxx/qla_attr.c |  6 ++++++
 drivers/scsi/qla2xxx/qla_init.c | 10 +++-------
 drivers/scsi/qla2xxx/qla_nvme.c |  5 ++++-
 3 files changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 3aa9869f6fae..c762c940970f 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -2648,7 +2648,13 @@ qla2x00_get_starget_port_id(struct scsi_target *starget)
 static inline void
 qla2x00_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout)
 {
+	fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
+
 	rport->dev_loss_tmo = timeout ? timeout : 1;
+
+	if (fcport->nvme_remote_port)
+		nvme_fc_set_remoteport_devloss(fcport->nvme_remote_port,
+					       rport->dev_loss_tmo);
 }
 
 static void
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index eb825318e3f5..7f5b64a5ec90 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -5629,13 +5629,6 @@ qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
 
 	qla2x00_dfs_create_rport(vha, fcport);
 
-	if (NVME_TARGET(vha->hw, fcport)) {
-		qla_nvme_register_remote(vha, fcport);
-		qla2x00_set_fcport_disc_state(fcport, DSC_LOGIN_COMPLETE);
-		qla2x00_set_fcport_state(fcport, FCS_ONLINE);
-		return;
-	}
-
 	qla24xx_update_fcport_fcp_prio(vha, fcport);
 
 	switch (vha->host->active_mode) {
@@ -5657,6 +5650,9 @@ qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
 		break;
 	}
 
+	if (NVME_TARGET(vha->hw, fcport))
+		qla_nvme_register_remote(vha, fcport);
+
 	qla2x00_set_fcport_state(fcport, FCS_ONLINE);
 
 	if (IS_IIDMA_CAPABLE(vha->hw) && vha->hw->flags.gpsc_supported) {
diff --git a/drivers/scsi/qla2xxx/qla_nvme.c b/drivers/scsi/qla2xxx/qla_nvme.c
index e119f8b24e33..5cc58957dbec 100644
--- a/drivers/scsi/qla2xxx/qla_nvme.c
+++ b/drivers/scsi/qla2xxx/qla_nvme.c
@@ -41,7 +41,7 @@ int qla_nvme_register_remote(struct scsi_qla_host *vha, struct fc_port *fcport)
 	req.port_name = wwn_to_u64(fcport->port_name);
 	req.node_name = wwn_to_u64(fcport->node_name);
 	req.port_role = 0;
-	req.dev_loss_tmo = 0;
+	req.dev_loss_tmo = fcport->dev_loss_tmo;
 
 	if (fcport->nvme_prli_service_param & NVME_PRLI_SP_INITIATOR)
 		req.port_role = FC_PORT_ROLE_NVME_INITIATOR;
@@ -68,6 +68,9 @@ int qla_nvme_register_remote(struct scsi_qla_host *vha, struct fc_port *fcport)
 		return ret;
 	}
 
+	nvme_fc_set_remoteport_devloss(fcport->nvme_remote_port,
+				       fcport->dev_loss_tmo);
+
 	if (fcport->nvme_prli_service_param & NVME_PRLI_SP_SLER)
 		ql_log(ql_log_info, vha, 0x212a,
 		       "PortID:%06x Supports SLER\n", req.port_id);
-- 
2.29.2