[PATCH v1 1/5] x86/boot: Add a trampoline for APs booting in 64-bit mode
From: Kuppuswamy Sathyanarayanan
Date: Wed Jun 09 2021 - 17:51:14 EST
From: Sean Christopherson <sean.j.christopherson@xxxxxxxxx>
Add a trampoline for booting APs in 64-bit mode via a software handoff
with BIOS, and use the new trampoline for the ACPI MP wake protocol used
by TDX. You can find MADT MP wake protocol details in ACPI specification
r6.4, sec 5.2.12.19.
Extend the real mode IDT pointer by four bytes to support LIDT in 64-bit
mode. For the GDT pointer, create a new entry as the existing storage
for the pointer occupies the zero entry in the GDT itself.
Reported-by: Kai Huang <kai.huang@xxxxxxxxx>
Signed-off-by: Sean Christopherson <sean.j.christopherson@xxxxxxxxx>
Reviewed-by: Andi Kleen <ak@xxxxxxxxxxxxxxx>
Reviewed-by: Dan Williams <dan.j.williams@xxxxxxxxx>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx>
---
arch/x86/include/asm/realmode.h | 11 +++++++
arch/x86/kernel/smpboot.c | 2 +-
arch/x86/realmode/rm/header.S | 1 +
arch/x86/realmode/rm/trampoline_64.S | 38 ++++++++++++++++++++++++
arch/x86/realmode/rm/trampoline_common.S | 12 +++++++-
5 files changed, 62 insertions(+), 2 deletions(-)
diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h
index 5db5d083c873..0f707521b797 100644
--- a/arch/x86/include/asm/realmode.h
+++ b/arch/x86/include/asm/realmode.h
@@ -25,6 +25,7 @@ struct real_mode_header {
u32 sev_es_trampoline_start;
#endif
#ifdef CONFIG_X86_64
+ u32 trampoline_start64;
u32 trampoline_pgd;
#endif
/* ACPI S3 wakeup */
@@ -88,6 +89,16 @@ static inline void set_real_mode_mem(phys_addr_t mem)
real_mode_header = (struct real_mode_header *) __va(mem);
}
+/* Common helper function to get start IP address */
+static inline unsigned long get_trampoline_start_ip(struct real_mode_header *rmh)
+{
+#ifdef CONFIG_X86_64
+ if (is_tdx_guest())
+ return rmh->trampoline_start64;
+#endif
+ return rmh->trampoline_start;
+}
+
void reserve_real_mode(void);
#endif /* __ASSEMBLY__ */
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 7770245cc7fa..3cde58849d70 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1033,7 +1033,7 @@ static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle,
int *cpu0_nmi_registered)
{
/* start_ip had better be page-aligned! */
- unsigned long start_ip = real_mode_header->trampoline_start;
+ unsigned long start_ip = get_trampoline_start_ip(real_mode_header);
unsigned long boot_error = 0;
unsigned long timeout;
diff --git a/arch/x86/realmode/rm/header.S b/arch/x86/realmode/rm/header.S
index 8c1db5bf5d78..2eb62be6d256 100644
--- a/arch/x86/realmode/rm/header.S
+++ b/arch/x86/realmode/rm/header.S
@@ -24,6 +24,7 @@ SYM_DATA_START(real_mode_header)
.long pa_sev_es_trampoline_start
#endif
#ifdef CONFIG_X86_64
+ .long pa_trampoline_start64
.long pa_trampoline_pgd;
#endif
/* ACPI S3 wakeup */
diff --git a/arch/x86/realmode/rm/trampoline_64.S b/arch/x86/realmode/rm/trampoline_64.S
index cc8391f86cdb..ae112a91592f 100644
--- a/arch/x86/realmode/rm/trampoline_64.S
+++ b/arch/x86/realmode/rm/trampoline_64.S
@@ -161,6 +161,19 @@ SYM_CODE_START(startup_32)
ljmpl $__KERNEL_CS, $pa_startup_64
SYM_CODE_END(startup_32)
+SYM_CODE_START(pa_trampoline_compat)
+ /*
+ * In compatibility mode. Prep ESP and DX for startup_32, then disable
+ * paging and complete the switch to legacy 32-bit mode.
+ */
+ movl $rm_stack_end, %esp
+ movw $__KERNEL_DS, %dx
+
+ movl $X86_CR0_PE, %eax
+ movl %eax, %cr0
+ ljmpl $__KERNEL32_CS, $pa_startup_32
+SYM_CODE_END(pa_trampoline_compat)
+
.section ".text64","ax"
.code64
.balign 4
@@ -169,6 +182,20 @@ SYM_CODE_START(startup_64)
jmpq *tr_start(%rip)
SYM_CODE_END(startup_64)
+SYM_CODE_START(trampoline_start64)
+ /*
+ * APs start here on a direct transfer from 64-bit BIOS with identity
+ * mapped page tables. Load the kernel's GDT in order to gear down to
+ * 32-bit mode (to handle 4-level vs. 5-level paging), and to (re)load
+ * segment registers. Load the zero IDT so any fault triggers a
+ * shutdown instead of jumping back into BIOS.
+ */
+ lidt tr_idt(%rip)
+ lgdt tr_gdt64(%rip)
+
+ ljmpl *tr_compat(%rip)
+SYM_CODE_END(trampoline_start64)
+
.section ".rodata","a"
# Duplicate the global descriptor table
# so the kernel can live anywhere
@@ -182,6 +209,17 @@ SYM_DATA_START(tr_gdt)
.quad 0x00cf93000000ffff # __KERNEL_DS
SYM_DATA_END_LABEL(tr_gdt, SYM_L_LOCAL, tr_gdt_end)
+SYM_DATA_START(tr_gdt64)
+ .short tr_gdt_end - tr_gdt - 1 # gdt limit
+ .long pa_tr_gdt
+ .long 0
+SYM_DATA_END(tr_gdt64)
+
+SYM_DATA_START(tr_compat)
+ .long pa_trampoline_compat
+ .short __KERNEL32_CS
+SYM_DATA_END(tr_compat)
+
.bss
.balign PAGE_SIZE
SYM_DATA(trampoline_pgd, .space PAGE_SIZE)
diff --git a/arch/x86/realmode/rm/trampoline_common.S b/arch/x86/realmode/rm/trampoline_common.S
index 5033e640f957..4331c32c47f8 100644
--- a/arch/x86/realmode/rm/trampoline_common.S
+++ b/arch/x86/realmode/rm/trampoline_common.S
@@ -1,4 +1,14 @@
/* SPDX-License-Identifier: GPL-2.0 */
.section ".rodata","a"
.balign 16
-SYM_DATA_LOCAL(tr_idt, .fill 1, 6, 0)
+
+/*
+ * When a bootloader hands off to the kernel in 32-bit mode an
+ * IDT with a 2-byte limit and 4-byte base is needed. When a boot
+ * loader hands off to a kernel 64-bit mode the base address
+ * extends to 8-bytes. Reserve enough space for either scenario.
+ */
+SYM_DATA_START_LOCAL(tr_idt)
+ .short 0
+ .quad 0
+SYM_DATA_END(tr_idt)
--
2.25.1