[PATCH] doc: Remove references to IBM Calgary

[Hubert Jasudowicz]

Calgary IOMMU driver has been removed in 90dc392fc445.
Clean up stale docs that refer to it.

Signed-off-by: Hubert Jasudowicz <hubert.jasudowicz@xxxxxxxxx>
---
 Documentation/x86/x86_64/boot-options.rst | 31 +----------------------
 1 file changed, 1 insertion(+), 30 deletions(-)

diff --git a/Documentation/x86/x86_64/boot-options.rst b/Documentation/x86/x86_64/boot-options.rst
index 324cefff92e7..5f62b3b86357 100644
--- a/Documentation/x86/x86_64/boot-options.rst
+++ b/Documentation/x86/x86_64/boot-options.rst
@@ -247,16 +247,11 @@ Multiple x86-64 PCI-DMA mapping implementations exist, for example:
       Kernel boot message: "PCI-DMA: Using software bounce buffering
       for IO (SWIOTLB)"
 
-   4. <arch/x86_64/pci-calgary.c> : IBM Calgary hardware IOMMU. Used in IBM
-      pSeries and xSeries servers. This hardware IOMMU supports DMA address
-      mapping with memory protection, etc.
-      Kernel boot message: "PCI-DMA: Using Calgary IOMMU"
-
 ::
 
   iommu=[<size>][,noagp][,off][,force][,noforce]
   [,memaper[=<order>]][,merge][,fullflush][,nomerge]
-  [,noaperture][,calgary]
+  [,noaperture]
 
 General iommu options:
 
@@ -295,8 +290,6 @@ iommu options only relevant to the AMD GART hardware IOMMU:
       Don't initialize the AGP driver and use full aperture.
     panic
       Always panic when IOMMU overflows.
-    calgary
-      Use the Calgary IOMMU if it is available
 
 iommu options only relevant to the software bounce buffering (SWIOTLB) IOMMU
 implementation:
@@ -307,28 +300,6 @@ implementation:
       force
         Force all IO through the software TLB.
 
-Settings for the IBM Calgary hardware IOMMU currently found in IBM
-pSeries and xSeries machines
-
-    calgary=[64k,128k,256k,512k,1M,2M,4M,8M]
-      Set the size of each PCI slot's translation table when using the
-      Calgary IOMMU. This is the size of the translation table itself
-      in main memory. The smallest table, 64k, covers an IO space of
-      32MB; the largest, 8MB table, can cover an IO space of 4GB.
-      Normally the kernel will make the right choice by itself.
-    calgary=[translate_empty_slots]
-      Enable translation even on slots that have no devices attached to
-      them, in case a device will be hotplugged in the future.
-    calgary=[disable=<PCI bus number>]
-      Disable translation on a given PHB. For
-      example, the built-in graphics adapter resides on the first bridge
-      (PCI bus number 0); if translation (isolation) is enabled on this
-      bridge, X servers that access the hardware directly from user
-      space might stop working. Use this option if you have devices that
-      are accessed from userspace directly on some PCI host bridge.
-    panic
-      Always panic when IOMMU overflows
-
 
 Miscellaneous
 =============
-- 
2.32.0