Re: [PATCH V3 net-next 1/4] dt-bindings: net: add dt binding for realtek rtl82xx phy
From: Rob Herring
Date: Wed Jun 09 2021 - 22:54:44 EST
On Tue, Jun 08, 2021 at 11:15:32AM +0800, Joakim Zhang wrote:
> Add binding for realtek rtl82xx phy.
>
> Signed-off-by: Joakim Zhang <qiangqing.zhang@xxxxxxx>
> ---
> .../bindings/net/realtek,rtl82xx.yaml | 45 +++++++++++++++++++
> 1 file changed, 45 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml
>
> diff --git a/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml
> new file mode 100644
> index 000000000000..bb94a2388520
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml
> @@ -0,0 +1,45 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Realtek RTL82xx PHY
> +
> +maintainers:
> + - Andrew Lunn <andrew@xxxxxxx>
> + - Florian Fainelli <f.fainelli@xxxxxxxxx>
> + - Heiner Kallweit <hkallweit1@xxxxxxxxx>
> +
> +description:
> + Bindings for Realtek RTL82xx PHYs
> +
> +allOf:
> + - $ref: ethernet-phy.yaml#
> +
> +properties:
> + realtek,clkout-disable:
> + type: boolean
> + description:
> + Disable CLKOUT clock, CLKOUT clock default is enabled after hardware reset.
> +
> +
Extra blank line.
> + realtek,aldps-enable:
> + type: boolean
> + description:
> + Enable ALDPS mode, ALDPS mode default is disabled after hardware reset.
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy1: ethernet-phy@1 {
> + reg = <1>;
> + realtek,clkout-disable;
> + realtek,aldps-enable;
The schema here will never be applied because there is nothing to match
on to determine which nodes it is valid. This should have a compatible
(because ethernet phys are not special).
Rob