Re: [PATCH V1] arm64: dts: qcom: sc7180: Added xo clock for eMMC and Sd card

[Bjorn Andersson]

On Thu 10 Jun 02:11 CDT 2021, Shaik Sajida Bhanu wrote:

> Added xo clock for eMMC and Sd card.

Was about to push out my branch of patches, but before I do. Can you
please describe WHY this is needed?

Regards,
Bjorn

> 
> Signed-off-by: Shaik Sajida Bhanu <sbhanu@xxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 10 ++++++----
>  1 file changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 295844e..5bb6bd4 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -701,8 +701,9 @@
>  			interrupt-names = "hc_irq", "pwr_irq";
>  
>  			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
> -					<&gcc GCC_SDCC1_AHB_CLK>;
> -			clock-names = "core", "iface";
> +					<&gcc GCC_SDCC1_AHB_CLK>,
> +					<&rpmhcc RPMH_CXO_CLK>;
> +			clock-names = "core", "iface","xo";
>  			interconnects = <&aggre1_noc MASTER_EMMC 0 &mc_virt SLAVE_EBI1 0>,
>  					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_EMMC_CFG 0>;
>  			interconnect-names = "sdhc-ddr","cpu-sdhc";
> @@ -2666,8 +2667,9 @@
>  			interrupt-names = "hc_irq", "pwr_irq";
>  
>  			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
> -					<&gcc GCC_SDCC2_AHB_CLK>;
> -			clock-names = "core", "iface";
> +					<&gcc GCC_SDCC2_AHB_CLK>,
> +					<&rpmhcc RPMH_CXO_CLK>;
> +			clock-names = "core", "iface", "xo";
>  
>  			interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
>  					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
> of Code Aurora Forum, hosted by The Linux Foundation
>