[PATCH v3 2/4] fpga: xilinx: reorganize to subdir layout

[trix]

From: Tom Rix <trix@xxxxxxxxxx>

Follow drivers/net/ethernet/ which has control configs
NET_VENDOR_BLA that map to drivers/net/ethernet/bla
Since fpgas do not have many vendors, drop the 'VENDOR' and use
FPGA_BLA.

There are several new subdirs
altera/
dfl/
lattice/
xilinx/

Each subdir has a Kconfig that has a new/reused

if FPGA_BLA
  ... existing configs ...
endif FPGA_BLA

Which is sourced into the main fpga/Kconfig

Each subdir has a Makefile whose transversal is controlled in the
fpga/Makefile by

obj-$(CONFIG_FPGA_BLA) += bla/

This is the xilinx/ subdir part

Create a xilinx/ subdir
Move xilinx-* and zynq* files to it.
Add a Kconfig and Makefile

Signed-off-by: Tom Rix <trix@xxxxxxxxxx>
---
 drivers/fpga/Kconfig                          | 40 +-------------
 drivers/fpga/Makefile                         |  5 +-
 drivers/fpga/xilinx/Kconfig                   | 55 +++++++++++++++++++
 drivers/fpga/xilinx/Makefile                  |  6 ++
 .../fpga/{ => xilinx}/xilinx-pr-decoupler.c   |  0
 drivers/fpga/{ => xilinx}/xilinx-spi.c        |  0
 drivers/fpga/{ => xilinx}/zynq-fpga.c         |  0
 drivers/fpga/{ => xilinx}/zynqmp-fpga.c       |  0
 8 files changed, 63 insertions(+), 43 deletions(-)
 create mode 100644 drivers/fpga/xilinx/Kconfig
 create mode 100644 drivers/fpga/xilinx/Makefile
 rename drivers/fpga/{ => xilinx}/xilinx-pr-decoupler.c (100%)
 rename drivers/fpga/{ => xilinx}/xilinx-spi.c (100%)
 rename drivers/fpga/{ => xilinx}/zynq-fpga.c (100%)
 rename drivers/fpga/{ => xilinx}/zynqmp-fpga.c (100%)

diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index c427b25cc6f7e..657703b41b06e 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -52,25 +52,12 @@ config FPGA_MGR_ALTERA_CVP
 	  FPGA manager driver support for Arria-V, Cyclone-V, Stratix-V,
 	  Arria 10 and Stratix10 Altera FPGAs using the CvP interface over PCIe.
 
-config FPGA_MGR_ZYNQ_FPGA
-	tristate "Xilinx Zynq FPGA"
-	depends on ARCH_ZYNQ || COMPILE_TEST
-	help
-	  FPGA manager driver support for Xilinx Zynq FPGAs.
-
 config FPGA_MGR_STRATIX10_SOC
 	tristate "Intel Stratix10 SoC FPGA Manager"
 	depends on (ARCH_INTEL_SOCFPGA && INTEL_STRATIX10_SERVICE)
 	help
 	  FPGA manager driver support for the Intel Stratix10 SoC.
 
-config FPGA_MGR_XILINX_SPI
-	tristate "Xilinx Configuration over Slave Serial (SPI)"
-	depends on SPI
-	help
-	  FPGA manager driver support for Xilinx FPGA configuration
-	  over slave serial interface.
-
 config FPGA_MGR_ICE40_SPI
 	tristate "Lattice iCE40 SPI"
 	depends on OF && SPI
@@ -113,23 +100,6 @@ config ALTERA_FREEZE_BRIDGE
 	  isolate one region of the FPGA from the busses while that
 	  region is being reprogrammed.
 
-config XILINX_PR_DECOUPLER
-	tristate "Xilinx LogiCORE PR Decoupler"
-	depends on FPGA_BRIDGE
-	depends on HAS_IOMEM
-	help
-	  Say Y to enable drivers for Xilinx LogiCORE PR Decoupler
-	  or Xilinx Dynamic Function eXchnage AIX Shutdown Manager.
-	  The PR Decoupler exists in the FPGA fabric to isolate one
-	  region of the FPGA from the busses while that region is
-	  being reprogrammed during partial reconfig.
-	  The Dynamic Function eXchange AXI shutdown manager prevents
-	  AXI traffic from passing through the bridge. The controller
-	  safely handles AXI4MM and AXI4-Lite interfaces on a
-	  Reconfigurable Partition when it is undergoing dynamic
-	  reconfiguration, preventing the system deadlock that can
-	  occur if AXI transactions are interrupted by DFX.
-
 config FPGA_REGION
 	tristate "FPGA Region"
 	depends on FPGA_BRIDGE
@@ -146,14 +116,6 @@ config OF_FPGA_REGION
 	  overlay.
 
 source "drivers/fpga/dfl/Kconfig"
-
-config FPGA_MGR_ZYNQMP_FPGA
-	tristate "Xilinx ZynqMP FPGA"
-	depends on ZYNQMP_FIRMWARE || (!ZYNQMP_FIRMWARE && COMPILE_TEST)
-	help
-	  FPGA manager driver support for Xilinx ZynqMP FPGAs.
-	  This driver uses the processor configuration port(PCAP)
-	  to configure the programmable logic(PL) through PS
-	  on ZynqMP SoC.
+source "drivers/fpga/xilinx/Kconfig"
 
 endif # FPGA
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index bda74e54ce390..0868c7c4264d8 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -15,9 +15,6 @@ obj-$(CONFIG_FPGA_MGR_SOCFPGA)		+= socfpga.o
 obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10)	+= socfpga-a10.o
 obj-$(CONFIG_FPGA_MGR_STRATIX10_SOC)	+= stratix10-soc.o
 obj-$(CONFIG_FPGA_MGR_TS73XX)		+= ts73xx-fpga.o
-obj-$(CONFIG_FPGA_MGR_XILINX_SPI)	+= xilinx-spi.o
-obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA)	+= zynq-fpga.o
-obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA)	+= zynqmp-fpga.o
 obj-$(CONFIG_ALTERA_PR_IP_CORE)         += altera-pr-ip-core.o
 obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT)    += altera-pr-ip-core-plat.o
 
@@ -25,10 +22,10 @@ obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT)    += altera-pr-ip-core-plat.o
 obj-$(CONFIG_FPGA_BRIDGE)		+= fpga-bridge.o
 obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE)	+= altera-hps2fpga.o altera-fpga2sdram.o
 obj-$(CONFIG_ALTERA_FREEZE_BRIDGE)	+= altera-freeze-bridge.o
-obj-$(CONFIG_XILINX_PR_DECOUPLER)	+= xilinx-pr-decoupler.o
 
 # High Level Interfaces
 obj-$(CONFIG_FPGA_REGION)		+= fpga-region.o
 obj-$(CONFIG_OF_FPGA_REGION)		+= of-fpga-region.o
 
 obj-$(CONFIG_FPGA_DFL) += dfl/
+obj-$(CONFIG_FPGA_XILINX) += xilinx/
diff --git a/drivers/fpga/xilinx/Kconfig b/drivers/fpga/xilinx/Kconfig
new file mode 100644
index 0000000000000..e016d450539a0
--- /dev/null
+++ b/drivers/fpga/xilinx/Kconfig
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config FPGA_XILINX
+	bool "Xilinx FPGAs"
+	default y
+	help
+	  If you have a xilinx fpga, say Y.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about xilinx fpgas. If you say Y, you will be asked
+	  for your specific device in the following questions.
+
+if FPGA_XILINX
+
+config FPGA_MGR_ZYNQ_FPGA
+	tristate "Xilinx Zynq FPGA"
+	depends on ARCH_ZYNQ || COMPILE_TEST
+	help
+	  FPGA manager driver support for Xilinx Zynq FPGAs.
+
+config FPGA_MGR_ZYNQMP_FPGA
+	tristate "Xilinx ZynqMP FPGA"
+	depends on ZYNQMP_FIRMWARE || (!ZYNQMP_FIRMWARE && COMPILE_TEST)
+	help
+	  FPGA manager driver support for Xilinx ZynqMP FPGAs.
+	  This driver uses the processor configuration port(PCAP)
+	  to configure the programmable logic(PL) through PS
+	  on ZynqMP SoC.
+
+config XILINX_PR_DECOUPLER
+	tristate "Xilinx LogiCORE PR Decoupler"
+	depends on FPGA_BRIDGE
+	depends on HAS_IOMEM
+	help
+	  Say Y to enable drivers for Xilinx LogiCORE PR Decoupler
+	  or Xilinx Dynamic Function eXchnage AIX Shutdown Manager.
+	  The PR Decoupler exists in the FPGA fabric to isolate one
+	  region of the FPGA from the busses while that region is
+	  being reprogrammed during partial reconfig.
+	  The Dynamic Function eXchange AXI shutdown manager prevents
+	  AXI traffic from passing through the bridge. The controller
+	  safely handles AXI4MM and AXI4-Lite interfaces on a
+	  Reconfigurable Partition when it is undergoing dynamic
+	  reconfiguration, preventing the system deadlock that can
+	  occur if AXI transactions are interrupted by DFX.
+
+config FPGA_MGR_XILINX_SPI
+	tristate "Xilinx Configuration over Slave Serial (SPI)"
+	depends on SPI
+	help
+	  FPGA manager driver support for Xilinx FPGA configuration
+	  over slave serial interface.
+
+endif #FPGA_XILINX
diff --git a/drivers/fpga/xilinx/Makefile b/drivers/fpga/xilinx/Makefile
new file mode 100644
index 0000000000000..2361aa14eb549
--- /dev/null
+++ b/drivers/fpga/xilinx/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+obj-$(CONFIG_XILINX_PR_DECOUPLER) += xilinx-pr-decoupler.o
+obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o
+obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
+obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA) += zynqmp-fpga.o
diff --git a/drivers/fpga/xilinx-pr-decoupler.c b/drivers/fpga/xilinx/xilinx-pr-decoupler.c
similarity index 100%
rename from drivers/fpga/xilinx-pr-decoupler.c
rename to drivers/fpga/xilinx/xilinx-pr-decoupler.c
diff --git a/drivers/fpga/xilinx-spi.c b/drivers/fpga/xilinx/xilinx-spi.c
similarity index 100%
rename from drivers/fpga/xilinx-spi.c
rename to drivers/fpga/xilinx/xilinx-spi.c
diff --git a/drivers/fpga/zynq-fpga.c b/drivers/fpga/xilinx/zynq-fpga.c
similarity index 100%
rename from drivers/fpga/zynq-fpga.c
rename to drivers/fpga/xilinx/zynq-fpga.c
diff --git a/drivers/fpga/zynqmp-fpga.c b/drivers/fpga/xilinx/zynqmp-fpga.c
similarity index 100%
rename from drivers/fpga/zynqmp-fpga.c
rename to drivers/fpga/xilinx/zynqmp-fpga.c
-- 
2.26.3