[PATCH v4 12/16] firmware: arm_scmi: Add message passing abstractions for transports
From: Cristian Marussi
Date: Fri Jun 11 2021 - 13:01:16 EST
From: Peter Hilber <peter.hilber@xxxxxxxxxxxxxxx>
Add abstractions for future transports using message passing, such as
virtio. Derive the abstractions from the shared memory abstractions.
Abstract the transport SDU through the opaque struct scmi_msg_payld.
Also enable the transport to determine all other required information
about the transport SDU.
Signed-off-by: Peter Hilber <peter.hilber@xxxxxxxxxxxxxxx>
---
drivers/firmware/Kconfig | 8 +-
drivers/firmware/arm_scmi/Makefile | 1 +
drivers/firmware/arm_scmi/common.h | 15 ++++
drivers/firmware/arm_scmi/msg.c | 113 +++++++++++++++++++++++++++++
4 files changed, 136 insertions(+), 1 deletion(-)
create mode 100644 drivers/firmware/arm_scmi/msg.c
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 358f895847b5..e74d25065d07 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -9,7 +9,7 @@ menu "Firmware Drivers"
config ARM_SCMI_PROTOCOL
tristate "ARM System Control and Management Interface (SCMI) Message Protocol"
depends on ARM || ARM64 || COMPILE_TEST
- depends on ARM_SCMI_HAVE_SHMEM
+ depends on ARM_SCMI_HAVE_SHMEM || ARM_SCMI_HAVE_MSG
help
ARM System Control and Management Interface (SCMI) protocol is a
set of operating system-independent software interfaces that are
@@ -33,6 +33,12 @@ config ARM_SCMI_HAVE_SHMEM
This declares whether a shared memory based transport for SCMI is
available.
+config ARM_SCMI_HAVE_MSG
+ bool
+ help
+ This declares whether a message passing based transport for SCMI is
+ available.
+
config ARM_SCMI_POWER_DOMAIN
tristate "SCMI power domain driver"
depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF)
diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile
index 5a2d4c32e0ae..f6b4acb8abdb 100644
--- a/drivers/firmware/arm_scmi/Makefile
+++ b/drivers/firmware/arm_scmi/Makefile
@@ -4,6 +4,7 @@ scmi-driver-y = driver.o notify.o
scmi-transport-$(CONFIG_ARM_SCMI_HAVE_SHMEM) = shmem.o
scmi-transport-$(CONFIG_MAILBOX) += mailbox.o
scmi-transport-$(CONFIG_HAVE_ARM_SMCCC_DISCOVERY) += smc.o
+scmi-transport-$(CONFIG_ARM_SCMI_HAVE_MSG) += msg.o
scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o system.o voltage.o
scmi-module-objs := $(scmi-bus-y) $(scmi-driver-y) $(scmi-protocols-y) \
$(scmi-transport-y)
diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index b783ae058c8a..fa4075336580 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -410,6 +410,21 @@ void shmem_clear_channel(struct scmi_shared_mem __iomem *shmem);
bool shmem_poll_done(struct scmi_shared_mem __iomem *shmem,
struct scmi_xfer *xfer);
+/* declarations for message passing transports */
+struct scmi_msg_payld;
+
+/** Maximum overhead of message w.r.t. struct scmi_desc.max_msg_size */
+#define SCMI_MSG_MAX_PROT_OVERHEAD (2 * sizeof(__le32))
+
+size_t msg_response_size(struct scmi_xfer *xfer);
+size_t msg_command_size(struct scmi_xfer *xfer);
+void msg_tx_prepare(struct scmi_msg_payld *msg, struct scmi_xfer *xfer);
+u32 msg_read_header(struct scmi_msg_payld *msg);
+void msg_fetch_response(struct scmi_msg_payld *msg, size_t len,
+ struct scmi_xfer *xfer);
+void msg_fetch_notification(struct scmi_msg_payld *msg, size_t len,
+ size_t max_len, struct scmi_xfer *xfer);
+
void scmi_notification_instance_data_set(const struct scmi_handle *handle,
void *priv);
void *scmi_notification_instance_data_get(const struct scmi_handle *handle);
diff --git a/drivers/firmware/arm_scmi/msg.c b/drivers/firmware/arm_scmi/msg.c
new file mode 100644
index 000000000000..8a2d3303d281
--- /dev/null
+++ b/drivers/firmware/arm_scmi/msg.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * For transports using message passing.
+ *
+ * Derived from shm.c.
+ *
+ * Copyright (C) 2019 ARM Ltd.
+ * Copyright (C) 2020 OpenSynergy GmbH
+ */
+
+#include <linux/io.h>
+#include <linux/processor.h>
+#include <linux/types.h>
+
+#include "common.h"
+
+/*
+ * struct scmi_msg_payld - Transport SDU layout
+ *
+ * The SCMI specification requires all parameters, message headers, return
+ * arguments or any protocol data to be expressed in little endian format only.
+ */
+struct scmi_msg_payld {
+ __le32 msg_header;
+ __le32 msg_payload[];
+};
+
+/**
+ * msg_command_size() - Actual size of transport SDU for command.
+ *
+ * @xfer: message which core has prepared for sending
+ *
+ * Return: transport SDU size.
+ */
+size_t msg_command_size(struct scmi_xfer *xfer)
+{
+ return sizeof(struct scmi_msg_payld) + xfer->tx.len;
+}
+
+/**
+ * msg_response_size() - Maximum size of transport SDU for response.
+ *
+ * @xfer: message which core has prepared for sending
+ *
+ * Return: transport SDU size.
+ */
+size_t msg_response_size(struct scmi_xfer *xfer)
+{
+ return sizeof(struct scmi_msg_payld) + sizeof(__le32) + xfer->rx.len;
+}
+
+/**
+ * msg_tx_prepare() - Set up transport SDU for command.
+ *
+ * @msg: transport SDU for command
+ * @xfer: message which is being sent
+ */
+void msg_tx_prepare(struct scmi_msg_payld *msg, struct scmi_xfer *xfer)
+{
+ msg->msg_header = cpu_to_le32(pack_scmi_header(&xfer->hdr));
+ if (xfer->tx.buf)
+ memcpy(msg->msg_payload, xfer->tx.buf, xfer->tx.len);
+}
+
+/**
+ * msg_read_header() - Read SCMI header from transport SDU.
+ *
+ * @msg: transport SDU
+ *
+ * Return: SCMI header
+ */
+u32 msg_read_header(struct scmi_msg_payld *msg)
+{
+ return le32_to_cpu(msg->msg_header);
+}
+
+/**
+ * msg_fetch_response() - Fetch response SCMI payload from transport SDU.
+ *
+ * @msg: transport SDU with response
+ * @len: transport SDU size
+ * @xfer: message being responded to
+ */
+void msg_fetch_response(struct scmi_msg_payld *msg, size_t len,
+ struct scmi_xfer *xfer)
+{
+ size_t prefix_len = sizeof(*msg) + sizeof(msg->msg_payload[0]);
+
+ xfer->hdr.status = le32_to_cpu(msg->msg_payload[0]);
+ xfer->rx.len = min_t(size_t, xfer->rx.len,
+ len >= prefix_len ? len - prefix_len : 0);
+
+ /* Take a copy to the rx buffer.. */
+ memcpy(xfer->rx.buf, &msg->msg_payload[1], xfer->rx.len);
+}
+
+/**
+ * msg_fetch_notification() - Fetch notification payload from transport SDU.
+ *
+ * @msg: transport SDU with notification
+ * @len: transport SDU size
+ * @max_len: maximum SCMI payload size to fetch
+ * @xfer: notification message
+ */
+void msg_fetch_notification(struct scmi_msg_payld *msg, size_t len,
+ size_t max_len, struct scmi_xfer *xfer)
+{
+ xfer->rx.len = min_t(size_t, max_len,
+ len >= sizeof(*msg) ? len - sizeof(*msg) : 0);
+
+ /* Take a copy to the rx buffer.. */
+ memcpy(xfer->rx.buf, msg->msg_payload, xfer->rx.len);
+}
--
2.17.1