[PATCH 2/2] arm64: dts: qcom: Add support for SONY Xperia 1 / 5 (Kumano platform)

From: Konrad Dybcio
Date: Fri Jun 11 2021 - 16:33:16 EST

Next message: Thomas Gleixner: "Re: [patch 08/41] x86/fpu: Restrict fpstate sanitizing to legacy components"
Previous message: Konrad Dybcio: "[PATCH 1/2] arm64: dts: qcom: sm8150: Disable Adreno and modem by default"
In reply to: Konrad Dybcio: "[PATCH 1/2] arm64: dts: qcom: sm8150: Disable Adreno and modem by default"
Next in thread: Marijn Suijten: "Re: [PATCH 2/2] arm64: dts: qcom: Add support for SONY Xperia 1 / 5 (Kumano platform)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Add support for SONY Xperia 1 and 5 smartphones, both based on the
Qualcomm SM8150 chipset. There also exist 5G-capable versions of these
devices, but they weren't sold much (if at all) outside Japan.

The devices are affected by a scary UFS behaviour where sending a certain UFS
command (which is worked around on downstream) renders the device unbootable,
by effectively erasing the bootloader. Therefore UFS AND UFSPHY are strictly
disabled for now.

Downstream workaround:
https://github.com/kholk/kernel/commit/2e7a9ee1c91a016baa0b826a7752ec45663a0561

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/Makefile | 2 +
arch/arm64/boot/dts/qcom/pm8150.dtsi | 2 +-
.../sm8150-sony-xperia-kumano-bahamut.dts | 19 +
.../sm8150-sony-xperia-kumano-griffin.dts | 13 +
.../dts/qcom/sm8150-sony-xperia-kumano.dtsi | 452 ++++++++++++++++++
5 files changed, 487 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts
create mode 100644 arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts
create mode 100644 arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index a3b832d9fc0c..814047aa340a 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -71,6 +71,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8150-sony-xperia-kumano-bahamut.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8150-sony-xperia-kumano-griffin.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb
diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index fa4ea7ded0ab..3b5e80dce5d2 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -50,7 +50,7 @@ pm8150_0: pmic@0 {
pon: power-on@800 {
compatible = "qcom,pm8916-pon";
reg = <0x0800>;
- pwrkey {
+ pon_pwrkey: pwrkey {
compatible = "qcom,pm8941-pwrkey";
interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts
new file mode 100644
index 000000000000..3b55fdda767a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
+ */
+
+/dts-v1/;
+
+#include "sm8150-sony-xperia-kumano.dtsi"
+
+/ {
+ model = "Sony Xperia 5";
+ compatible = "sony,bahamut-generic", "qcom,sm8150";
+};
+
+&framebuffer {
+ width = <1080>;
+ height = <2520>;
+ stride = <(1080 * 4)>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts
new file mode 100644
index 000000000000..6f490ec284bd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
+ */
+
+/dts-v1/;
+
+#include "sm8150-sony-xperia-kumano.dtsi"
+
+/ {
+ model = "Sony Xperia 1";
+ compatible = "sony,griffin-generic", "qcom,sm8150";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
new file mode 100644
index 000000000000..014fe3a31548
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
@@ -0,0 +1,452 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8150.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+
+/delete-node/ &cdsp_mem;
+/delete-node/ &gpu_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &ipa_gsi_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &venus_mem;
+
+/ {
+ qcom,msm-id = <339 0x20000>; /* SM8150 v2 */
+ qcom,board-id = <8 0>;
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer: framebuffer@9c000000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0x9c000000 0 0x2300000>;
+ width = <1644>;
+ height = <3840>;
+ stride = <(1644 * 4)>;
+ format = "a8r8g8b8";
+ /*
+ * That's (going to be) a lot of clocks, but it's necessary due
+ * to unused clk cleanup & no panel driver yet (& no dispcc either)..
+ */
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ /*
+ * Apparently RPMh does not provide support for PM8150 S4 because it
+ * is always-on; model it as a fixed regulator.
+ */
+ vreg_s4a_1p8: pm8150-s4 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s4a_1p8";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&vph_pwr>;
+ };
+
+ reserved-memory {
+ mpss_mem: memory@8dc00000 {
+ reg = <0x0 0x8dc00000 0x0 0x9600000>;
+ no-map;
+ };
+
+ venus_mem: memory@97200000 {
+ reg = <0x0 0x97200000 0x0 0x500000>;
+ no-map;
+ };
+
+ slpi_mem: memory@97700000 {
+ reg = <0x0 0x97700000 0x0 0x1400000>;
+ no-map;
+ };
+
+ ipa_fw_mem: memory@98b00000 {
+ reg = <0x0 0x98b00000 0x0 0x10000>;
+ no-map;
+ };
+
+ ipa_gsi_mem: memory@98b10000 {
+ reg = <0x0 0x98b10000 0x0 0x5000>;
+ no-map;
+ };
+
+ gpu_mem: memory@98b15000 {
+ reg = <0x0 0x98b15000 0x0 0x2000>;
+ no-map;
+ };
+
+ spss_mem: memory@98c00000 {
+ reg = <0x0 0x98c00000 0x0 0x100000>;
+ no-map;
+ };
+
+ cdsp_mem: memory@98d00000 {
+ reg = <0x0 0x98d00000 0x0 0x1400000>;
+ no-map;
+ };
+
+ cont_splash_mem: memory@9c000000 {
+ reg = <0x0 0x9c000000 0x0 0x2400000>;
+ no-map;
+ };
+
+ cdsp_sec_mem: memory@a4c00000 {
+ reg = <0x0 0xa4c00000 0x0 0x3c00000>;
+ no-map;
+ };
+
+ ramoops@ffc00000 {
+ compatible = "ramoops";
+ reg = <0x0 0xffc00000 0x0 0x100000>;
+ record-size = <0x1000>;
+ console-size = <0x40000>;
+ msg-size = <0x20000 0x20000>;
+ ecc-size = <16>;
+ no-map;
+ };
+ };
+};
+
+&adsp_mem {
+ reg = <0x0 0x8be00000 0x0 0x1e00000>;
+};
+
+&apps_rsc {
+ pm8150-rpmh-regulators {
+ compatible = "qcom,pm8150-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+
+ vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
+ vdd-l2-l10-supply = <&vreg_bob>;
+ vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>;
+ vdd-l6-l9-supply = <&vreg_s8c_1p3>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+ vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+ vreg_s2a_0p6: smps2 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <600000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5a_1p9: smps5 {
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2040000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s6a_0p9: smps6 {
+ regulator-min-microvolt = <920000>;
+ regulator-max-microvolt = <1128000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1a_0p75: ldo1 {
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <752000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2a_3p1: ldo2 {
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3a_0p8: ldo3 {
+ regulator-min-microvolt = <480000>;
+ regulator-max-microvolt = <932000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5a_0p875: ldo5 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6a_1p2: ldo6 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a_1p8: ldo7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9a_1p2: ldo9 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10a_2p5: ldo10 {
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11a_0p8: ldo11 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12a_1p8: ldo12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L13 is unused. */
+
+ vreg_l14a_1p8: ldo14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15a_1p7: ldo15 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16a_2p7: ldo16 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17a_3p0: ldo17 {
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18a_0p8: ldo18 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ pm8150l-rpmh-regulators {
+ compatible = "qcom,pm8150l-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+
+ vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+ vdd-l2-l3-supply = <&vreg_s8c_1p3>;
+ vdd-l4-l5-l6-supply = <&vreg_bob>;
+ vdd-l7-l11-supply = <&vreg_bob>;
+ vdd-l9-l10-supply = <&vreg_bob>;
+
+ vdd-bob-supply = <&vph_pwr>;
+ vdd-flash-supply = <&vreg_bob>;
+ vdd-rgb-supply = <&vreg_bob>;
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3350000>;
+ regulator-max-microvolt = <4000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ regulator-allow-bypass;
+ };
+
+ vreg_s1c_1p1: smps1 {
+ regulator-min-microvolt = <1128000>;
+ regulator-max-microvolt = <1128000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s8c_1p3: smps8 {
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c_1p8: ldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_1p3: ldo2 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_1p2: ldo3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c_1p8: ldo4 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5c_1p8: ldo5 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c_2p9: ldo6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l7c_3p0: ldo7 {
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c_1p8: ldo8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c_2p9: ldo9 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l10c_3p3: ldo10 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11c_3p3: ldo11 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ /* PM8009 is not present on these boards, even if downstream sources suggest so. */
+};
+
+&i2c4 {
+ status = "okay";
+
+ /* Qcom SMB1355 @ c */
+ /* Qcom SMB1390 @ 10 */
+ /* NXP PN553 NFC @ 28 */
+ /* Qcom FSA4480 USB-C audio switch @ 43 */
+};
+
+&i2c7 {
+ status = "okay";
+
+ /* AMS TCS3490 RGB+IR color sensor @ 72 */
+};
+
+&i2c10 {
+ status = "okay";
+
+ /* Samsung touchscreen @ 48 */
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <126 4>;
+};
+
+&uart2 {
+ status = "okay";
+};
+
+/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
+&ufs_mem_hc { status = "disabled"; };
+&ufs_mem_phy { status = "disabled"; };
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+ status = "okay";
+ vdda-pll-supply = <&vreg_l5a_0p875>;
+ vdda33-supply = <&vreg_l2a_3p1>;
+ vdda18-supply = <&vreg_l12a_1p8>;
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l3c_1p2>;
+ vdda-pll-supply = <&vreg_l18a_0p8>;
+};
--
2.32.0

Next message: Thomas Gleixner: "Re: [patch 08/41] x86/fpu: Restrict fpstate sanitizing to legacy components"
Previous message: Konrad Dybcio: "[PATCH 1/2] arm64: dts: qcom: sm8150: Disable Adreno and modem by default"
In reply to: Konrad Dybcio: "[PATCH 1/2] arm64: dts: qcom: sm8150: Disable Adreno and modem by default"
Next in thread: Marijn Suijten: "Re: [PATCH 2/2] arm64: dts: qcom: Add support for SONY Xperia 1 / 5 (Kumano platform)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]