Re: [PATCH v2] hwmon: corsair-psu: fix suspend behavior

[Wilken Gottwalt]

On Fri, 4 Jun 2021 04:05:14 -0700
Guenter Roeck <linux@xxxxxxxxxxxx> wrote:

> On Fri, Jun 04, 2021 at 05:17:11AM +0000, Wilken Gottwalt wrote:
> > On Thu, 3 Jun 2021 09:05:33 -0700
> > Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
> > 
> > > On Thu, Jun 03, 2021 at 11:51:02AM +0000, Wilken Gottwalt wrote:
> > > > During standby some PSUs turn off the microcontroller. A re-init is
> > > > required during resume or the microcontroller stays unresponsive.
> > > > 
> > > > Fixes: d115b51e0e56 ("hwmon: add Corsair PSU HID controller driver")
> > > > Signed-off-by: Wilken Gottwalt <wilken.gottwalt@xxxxxxxxxx>
> > > 
> > > Applied.
> > 
> > Thank you. Though I have an odd question. I would like to change the licensing to
> > a dual license (GPL/MPL) to support the LibreHardwareMonitor project. They want
> > to use my code but use a MPL license. What would be the best way to do this?
> 
> Submit a patch which would need an Acked-by: from everyone who contributed
> to the driver. As far as I can see, that would be Wan Jiabing
> <wanjiabing@xxxxxxxx>, Jack Doan <me@xxxxxxxxxxxx>, and Colin Ian King
> <colin.king@xxxxxxxxxxxxx>. I would suggest to ask them first if the license
> change is ok with them.

I got the okay from Jack who had the idea for the precision patch. But the other
two, who did the semicolon and long cast patches do not reply. So what now?

> Guenter
> 
> > 
> > greetings,
> > Will
> > 
> > > Thanks,
> > > Guenter
> > > 
> > > > ---
> > > > Changes in v2:
> > > >   - corrected fixes commit
> > > > ---
> > > >  drivers/hwmon/corsair-psu.c | 14 ++++++++++++++
> > > >  1 file changed, 14 insertions(+)
> > > > 
> > > > diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c
> > > > index 02298b86b57b..731d5117f9f1 100644
> > > > --- a/drivers/hwmon/corsair-psu.c
> > > > +++ b/drivers/hwmon/corsair-psu.c
> > > > @@ -771,6 +771,16 @@ static int corsairpsu_raw_event(struct hid_device *hdev, struct
> > > > hid_report *repo return 0;
> > > >  }
> > > >  
> > > > +#ifdef CONFIG_PM
> > > > +static int corsairpsu_resume(struct hid_device *hdev)
> > > > +{
> > > > +	struct corsairpsu_data *priv = hid_get_drvdata(hdev);
> > > > +
> > > > +	/* some PSUs turn off the microcontroller during standby, so a reinit is required
> > > > */
> > > > +	return corsairpsu_init(priv);
> > > > +}
> > > > +#endif
> > > > +
> > > >  static const struct hid_device_id corsairpsu_idtable[] = {
> > > >  	{ HID_USB_DEVICE(0x1b1c, 0x1c03) }, /* Corsair HX550i */
> > > >  	{ HID_USB_DEVICE(0x1b1c, 0x1c04) }, /* Corsair HX650i */
> > > > @@ -793,6 +803,10 @@ static struct hid_driver corsairpsu_driver = {
> > > >  	.probe		= corsairpsu_probe,
> > > >  	.remove		= corsairpsu_remove,
> > > >  	.raw_event	= corsairpsu_raw_event,
> > > > +#ifdef CONFIG_PM
> > > > +	.resume		= corsairpsu_resume,
> > > > +	.reset_resume	= corsairpsu_resume,
> > > > +#endif
> > > >  };
> > > >  module_hid_driver(corsairpsu_driver);
> > > >  
> >