[PATCH v2 25/33] arm64: zynqmp: Wire qspi on multiple boards

[Michal Simek]

Couple of boards have qspi on the board that's why enable controller and
describe them.

Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
---

Changes in v2: None

 .../arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts | 16 +++++++++++++++-
 .../arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts | 16 +++++++++++++++-
 .../boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts  | 14 ++++++++++++++
 .../boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts  | 14 ++++++++++++++
 .../arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 15 +++++++++++++++
 .../arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts | 14 ++++++++++++++
 .../arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts |  4 ++++
 .../arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 15 +++++++++++++++
 .../arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 15 +++++++++++++++
 9 files changed, 121 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts
index 2e05fa416955..f1598527e5ec 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZC1232
  *
- * (C) Copyright 2017 - 2019, Xilinx, Inc.
+ * (C) Copyright 2017 - 2021, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xxxxxxxxxx>
  */
@@ -19,6 +19,7 @@ / {
 	aliases {
 		serial0 = &uart0;
 		serial1 = &dcc;
+		spi0 = &qspi;
 	};
 
 	chosen {
@@ -36,6 +37,19 @@ &dcc {
 	status = "okay";
 };
 
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
 &sata {
 	status = "okay";
 	/* SATA OOB timing settings */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts
index 3d0aaa02f184..04efa1683eaa 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZC1254
  *
- * (C) Copyright 2015 - 2019, Xilinx, Inc.
+ * (C) Copyright 2015 - 2021, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xxxxxxxxxx>
  * Siva Durga Prasad Paladugu <sivadur@xxxxxxxxxx>
@@ -20,6 +20,7 @@ / {
 	aliases {
 		serial0 = &uart0;
 		serial1 = &dcc;
+		spi0 = &qspi;
 	};
 
 	chosen {
@@ -37,6 +38,19 @@ &dcc {
 	status = "okay";
 };
 
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
index cd406947ec34..9f176307b62a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
@@ -26,6 +26,7 @@ aliases {
 		mmc1 = &sdhci1;
 		rtc0 = &rtc;
 		serial0 = &uart0;
+		spi0 = &qspi;
 	};
 
 	chosen {
@@ -339,6 +340,19 @@ conf {
 	};
 };
 
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* Micron MT25QU512ABB8ESF */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
 &rtc {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
index 8046f0df0f35..05a2b79738af 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
@@ -26,6 +26,7 @@ aliases {
 		rtc0 = &rtc;
 		serial0 = &uart0;
 		serial1 = &uart1;
+		spi0 = &qspi;
 	};
 
 	chosen {
@@ -161,6 +162,19 @@ &i2c1 {
 	status = "okay";
 };
 
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>; /* also DUAL configuration possible */
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
 &rtc {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 3cbc51b4587d..becfc23a5610 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -30,6 +30,7 @@ aliases {
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &dcc;
+		spi0 = &qspi;
 	};
 
 	chosen {
@@ -934,6 +935,20 @@ &psgtr {
 	clock-names = "ref0", "ref1", "ref2", "ref3";
 };
 
+&qspi {
+	status = "okay";
+	is-dual = <1>;
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
 &rtc {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
index 4c328569c3ac..84c4a9003e2e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
@@ -28,6 +28,7 @@ aliases {
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &dcc;
+		spi0 = &qspi;
 	};
 
 	chosen {
@@ -427,6 +428,19 @@ &psgtr {
 	clock-names = "ref1", "ref2", "ref3";
 };
 
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* n25q512a 128MiB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
 &sata {
 	status = "okay";
 	/* SATA OOB timing settings */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
index 99d172867f6a..fb8d76b5c27f 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
@@ -28,6 +28,7 @@ aliases {
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &dcc;
+		spi0 = &qspi;
 	};
 
 	chosen {
@@ -435,6 +436,9 @@ flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
 	};
 };
 
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 464a76a13c24..d2219373580a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -30,6 +30,7 @@ aliases {
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &dcc;
+		spi0 = &qspi;
 	};
 
 	chosen {
@@ -928,6 +929,20 @@ &psgtr {
 	clock-names = "ref1", "ref2", "ref3";
 };
 
+&qspi {
+	status = "okay";
+	is-dual = <1>;
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
 &rtc {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index c9d41d16c3f0..4dc315ee91b7 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -29,6 +29,7 @@ aliases {
 		rtc0 = &rtc;
 		serial0 = &uart0;
 		serial1 = &dcc;
+		spi0 = &qspi;
 	};
 
 	chosen {
@@ -772,6 +773,20 @@ &psgtr {
 	clock-names = "ref1", "ref2", "ref3";
 };
 
+&qspi {
+	status = "okay";
+	is-dual = <1>;
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
 &rtc {
 	status = "okay";
 };
-- 
2.32.0