[PATCH v2 09/33] arm64: zynqmp: Add phy description for usb3.0

[Michal Simek]

usb3.0 requires serdes setting that's why also wire it up.

Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
---

Changes in v2: None

 arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 6 ++++++
 arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 3 +++
 arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts | 3 +++
 arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts | 3 +++
 arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 3 +++
 arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 3 +++
 6 files changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index 4622e173d262..80415e202814 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -538,6 +538,9 @@ &usb0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
 	dr_mode = "peripheral";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 0>;
+	maximum-speed = "super-speed";
 };
 
 /* ULPI SMSC USB3320 */
@@ -546,6 +549,9 @@ &usb1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb1_default>;
 	dr_mode = "host";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 3 PHY_TYPE_USB3 1 0>;
+	maximum-speed = "super-speed";
 };
 
 &watchdog0 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index b37aee2d85b9..719a9e5e1b01 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -979,6 +979,9 @@ &usb0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
 	dr_mode = "host";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+	maximum-speed = "super-speed";
 };
 
 &watchdog0 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
index 7e1b024f71e1..d7ecfcadd08b 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
@@ -469,6 +469,9 @@ &usb0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
 	dr_mode = "host";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+	maximum-speed = "super-speed";
 };
 
 &watchdog0 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
index b140fd2c86aa..403a8ea6a36f 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
@@ -491,6 +491,9 @@ &usb0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
 	dr_mode = "host";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+	maximum-speed = "super-speed";
 };
 
 &watchdog0 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 4919cdec835b..186d2e00d4a0 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -985,6 +985,9 @@ &usb0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
 	dr_mode = "host";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+	maximum-speed = "super-speed";
 };
 
 &watchdog0 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index b0c2eae1b4b3..0bf29ff9c714 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -811,6 +811,9 @@ &usb0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
 	dr_mode = "host";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+	maximum-speed = "super-speed";
 };
 
 &zynqmp_dpdma {
-- 
2.32.0